142 lines
4.0 KiB
C
142 lines
4.0 KiB
C
|
+/*
|
||
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
|
||
|
|
2011,2012 Giovanni Di Sirio.
|
||
|
|
|
||
|
|
This file is part of ChibiOS/RT.
|
||
|
|
|
||
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
||
|
|
it under the terms of the GNU General Public License as published by
|
||
|
|
the Free Software Foundation; either version 3 of the License, or
|
||
|
|
(at your option) any later version.
|
||
|
|
|
||
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
||
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
GNU General Public License for more details.
|
||
|
|
|
||
|
|
You should have received a copy of the GNU General Public License
|
||
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef _BOARD_H_
|
||
|
|
#define _BOARD_H_
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Setup for the LeafLabs Maple Mini.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Board identifier.
|
||
|
|
*/
|
||
|
|
#define BOARD_MAPLEMINI_STM32_F103
|
||
|
|
#define BOARD_NAME "LeafLabs Maple Mini"
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Board frequencies.
|
||
|
|
*/
|
||
|
|
#define STM32_LSECLK 32768
|
||
|
|
#define STM32_HSECLK 8000000
|
||
|
|
|
||
|
|
/*
|
||
|
|
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
|
||
|
|
*/
|
||
|
|
#define STM32F10X_MD
|
||
|
|
|
||
|
|
/*
|
||
|
|
* IO pins assignments.
|
||
|
|
*/
|
||
|
|
/* Missing.*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* I/O ports initial setup, this configuration is established soon after reset
|
||
|
|
* in the initialization code.
|
||
|
|
*
|
||
|
|
* The digits have the following meaning:
|
||
|
|
* 0 - Analog input.
|
||
|
|
* 1 - Push Pull output 10MHz.
|
||
|
|
* 2 - Push Pull output 2MHz.
|
||
|
|
* 3 - Push Pull output 50MHz.
|
||
|
|
* 4 - Digital input.
|
||
|
|
* 5 - Open Drain output 10MHz.
|
||
|
|
* 6 - Open Drain output 2MHz.
|
||
|
|
* 7 - Open Drain output 50MHz.
|
||
|
|
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
||
|
|
* 9 - Alternate Push Pull output 10MHz.
|
||
|
|
* A - Alternate Push Pull output 2MHz.
|
||
|
|
* B - Alternate Push Pull output 50MHz.
|
||
|
|
* C - Reserved.
|
||
|
|
* D - Alternate Open Drain output 10MHz.
|
||
|
|
* E - Alternate Open Drain output 2MHz.
|
||
|
|
* F - Alternate Open Drain output 50MHz.
|
||
|
|
* Please refer to the STM32 Reference Manual for details.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Port A setup.
|
||
|
|
* Everything input with pull-up except:
|
||
|
|
* PA2 - Alternate output (USART2 TX).
|
||
|
|
* PA3 - Normal input (USART2 RX).
|
||
|
|
* PA9 - Alternate output (USART1 TX).
|
||
|
|
* PA10 - Normal input (USART1 RX).
|
||
|
|
*/
|
||
|
|
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
|
||
|
|
#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
|
||
|
|
#define VAL_GPIOAODR 0xFFFFFFFF
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Port B setup.
|
||
|
|
* Everything input with pull-up except:
|
||
|
|
* PB1 - Push Pull output (LED).
|
||
|
|
*/
|
||
|
|
#define VAL_GPIOBCRL 0x88888838 /* PB7...PB0 */
|
||
|
|
#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
|
||
|
|
#define VAL_GPIOBODR 0xFFFFFFFF
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Port C setup.
|
||
|
|
* Everything input with pull-up except:
|
||
|
|
*/
|
||
|
|
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
|
||
|
|
#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */
|
||
|
|
#define VAL_GPIOCODR 0xFFFFFFFF
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Port D setup.
|
||
|
|
* Everything input with pull-up except:
|
||
|
|
* PD0 - Normal input (XTAL).
|
||
|
|
* PD1 - Normal input (XTAL).
|
||
|
|
*/
|
||
|
|
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
|
||
|
|
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
|
||
|
|
#define VAL_GPIODODR 0xFFFFFFFF
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Port E setup.
|
||
|
|
* Everything input with pull-up except:
|
||
|
|
*/
|
||
|
|
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
|
||
|
|
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
|
||
|
|
#define VAL_GPIOEODR 0xFFFFFFFF
|
||
|
|
|
||
|
|
/*
|
||
|
|
* USB bus activation macro, required by the USB driver.
|
||
|
|
*/
|
||
|
|
#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISC)
|
||
|
|
|
||
|
|
/*
|
||
|
|
* USB bus de-activation macro, required by the USB driver.
|
||
|
|
*/
|
||
|
|
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISC)
|
||
|
|
|
||
|
|
#if !defined(_FROM_ASM_)
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
void boardInit(void);
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
#endif /* _FROM_ASM_ */
|
||
|
|
|
||
|
|
#endif /* _BOARD_H_ */
|