tinySA/os/hal/platforms/SPC56x/platform.dox

/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

/**
 * @defgroup SPC563 SPC563Mx Drivers
 * @details This section describes all the supported drivers on the
 *          SPC563Mx/MPC563xM platform and the implementation details
 *          of the single drivers.
 *
 * @ingroup platforms
 */

/**
 * @defgroup SPC563_HAL SPC563Mx Initialization Support
 * @details The SPC563Mx/MPC563xM HAL support is responsible for system
 *          initialization.
 *
 * @section spc563_hal_1 Supported HW resources
 * - FMPLL.
 * - INTC.
 * - XBAR.
 * - CFLASH0.
 * .
 * @section spc563_hal_2 SPC563Mx HAL driver implementation features
 * - FMPLL startup and stabilization.
 * - Clock tree initialization.
 * - Clock source selection.
 * - Flash wait states initialization based on the selected clock options.
 * - SYSTICK initialization based on current clock and kernel required rate.
 * - DMA support initialization.
 * .
 * @ingroup SPC563
 */

/**
 * @defgroup SPC563_SERIAL SPC563Mx Serial Support
 * @details The SPC563Mx/MPC563xM Serial driver uses the ESCI peripherals
 *          in a buffered, interrupt driven, implementation.
 *
 * @section spc563_serial_1 Supported HW resources
 * The serial driver can support any of the following hardware resources:
 * - ESCIA.
 * - ESCIB.
 * .
 * @section spc563_serial_2 SPC563Mx Serial driver implementation features
 * - Clock stop for reduced power usage when the driver is in stop state.
 * - Each ESCI can be independently enabled and programmed. Unused
 *   peripherals are left in low power mode.
 * - Fully interrupt driven.
 * - Programmable priority levels for each ESCI.
 * .
 * @ingroup SPC563
 */