This commit removes Platform::Window::Redraw function, and rewrites
its uses to run on timer events. Most UI toolkits have obscure issues
with recursive event handling loops, and Emscripten is purely event-
driven and cannot handle imperative redraws at all.
As a part of this change, the Platform::Timer::WindUp function
is split into three to make the interpretation of its argument
less magical. The new functions are RunAfter (a regular timeout,
setTimeout in browser terms), RunAfterNextFrame (an animation
request, requestAnimationFrame in browser terms), and
RunAfterProcessingEvents (a request to run something after all
events for the current frame are processed, used for coalescing
expensive operations in face of input event queues).
This commit changes two uses of Redraw(): the AnimateOnto() and
ScreenStepDimGo() functions. The latter was actually broken in that
on small sketches, it would run very quickly and not animate
the dimension change at all; this has been fixed.
While we're at it, get rid of unused Platform::Window::NativePtr
function as well.
This commit fixes two issues that cause issues in WebGL:
* Non-power-of-two textures must wrap as GL_CLAMP_TO_EDGE.
This breaks non-power-of-two textures.
* Render calls with zero primitives should not be issued.
This just causes warning spam.
The code in LoadStringFromGzip was attempting to perform an unaligned
access using memcpy, but it cast the source to a pointer with
alignment requirements larger than 1, which, under optimizations,
reintroduced the original issue.
This is to address MSVC warnings.
This commit changes a few configuration fields to use double instead
of float. There doesn't seem to be any reason these use float except
for the legacy Windows code using float for saved configuration.
Changing their type to double improves consistency.
This commit merges all ad-hoc file dialog code, such as the feature
where dialogs remember last location and format, and exposes it
through a common interface.
This commit also significantly improves Gtk dialog handling code.
This commit changes the awfully specific code for dialogs with
messages duplicated three times to go through a generic interface.
It also fixes some issues with the way translated messages
were parameterized.
This commit removes the custom message dialog box used on Windows,
for several reasons. First, it was the last element not respecting
HiDPI displays. Second, other OSes do not easily provide this much
control over rendering default message boxes, and both Gnome and
macOS frown upon non-standard renderings such as those; so the custom
rendering was already not used on the other OSes.
This commit mostly just changes the settings code to be in line with
the rest of the platform abstractions, although it also fixes some
settings names to be consistent with others, and uses native bool
types where applicable.
This commit also makes settings-related operations much less
wasteful, not that it should matter.
This commit removes a large amount of code partially duplicated
between the text and the graphics windows, and opens the path to
having more than one model window on screen at any given time,
as well as simplifies platform work.
This commit also adds complete support for High-DPI device pixel
ratio. It adds support for font scale factor (a fractional factor
on top of integral device pixel ratio) on the platform side, but not
on the application side.
This commit also adds error checking to all Windows API calls
(within the abstracted code) and fixes a significant number of
misuses and non-future-proof uses of Windows API.
This commit also makes uses of Windows API idiomatic, e.g. using
the built-in vertical scroll bar, native tooltips, control
subclassing instead of hooks in the global dispatch loop, and so on.
It reinstates tooltip support and removes menu-related hacks.
This commit removes a large amount of redundant code that needed
to be kept in sync between platforms and also makes it much easier
to add new menu-related functionality since little to no platform
code needs to be altered anymore.
This commit also greatly improves code locality in context menu
handling by allowing context menu click handlers to be closures.
This commit temporarily introduces a SetMainMenu API, which is rather
hacky but only necessary until an abstraction for windows is added.
We should make good use of in-place member initialization. Many
new classes have constructors that effectively do nothing but
default-initialize POD members, and when adding new members,
it is very easy to miss initializing them. With in-place
initialization, the code is more compact, the diffs are nicer,
and it's harder to miss them.
This commit only converts render/ and platform/ to use in-place
member initialization, since there was a bug in CairoRenderer,
but we should convert the entire codebase.
This changes the assertion failure behavior to be the same in debug
and release builds: to show the complete failure message, and
to offer to restart the application or defer to Windows Error
Reporting to generate a backtrace. Contrary to popular belief,
WER is not useless, and since SolveSpace publishes pdb files,
WER-generated reports can be symbolized.
This commit also addresses the long-standing problem where showing
a dialog on fatal error would re-enter the application code, thus
causing another error or a crash that is more fatal than the current
one.
According to the C standard all preprocessor definitions starting
with an underscore are reserved for standard and implementation use,
so don't use those. Also, sort and unique include directives.
windowBits of 16 means "decode gzip header" and "use window size
from zlib header". For some reason, this results in a window size
that is too small on OpenBSD. Instead, use maximum window size
explicitly, since there is no downside for doing so.
Since font sizes in SolveSpace are specified in terms of cap height,
we need U+0041 to determine cap height. Some fonts lack it; in
that case, we assume that cap height is the same as the size we've
requested. This avoids a crash, at the cost of completely wrong
(although consistent) metrics; I do not really know of a better way.
There was a copy rule that copied the locale from the source
to the binary directory, and also a regeneration rule that used
the locale in the binary directory as a temporary file.
Rename the target for the latter.
To reproduce:
* New sketch;
* Create two redundant constraints, with second being automatically
marked as reference;
* Switch one of these to non-reference;
* Allow redundant constraints;
* All new constraints with labels created as reference, even
if that specific degree of freedom is not constrained yet.
Before this commit, if the source group of a step rotate/translate
group is forced to triangle mesh, the UI would show that the step
rotate/translate group is also forced to triangle mesh, but the group
would in fact contain NURBS surfaces.
glibc defines a CHAR_WIDTH macro in limits.h since about 6.3.*.
This is apparently added as a part of ISO TS 18661-1:2014, which
I cannot read because it is not publicly available, and which covers
some sort of floating-point extensions. This is one of those changes
that should never have been done yet here we are.
This commit updates a *lot* of rather questionable path handling
logic to be robust. Specifically:
* All path operations go through Platform::Path.
* All ad-hoc path handling functions are removed, together with
PATH_SEP. This removes code that was in platform-independent
parts, but had platform-dependent behavior.
* Group::linkFileRel is removed; only an absolute path is stored
in Group::linkFile. However, only Group::linkFileRel is saved,
with the relative path calculated on the fly, from the filename
passed into SaveToFile. This eliminates dependence on global
state, and makes it unnecessary to have separare code paths
for saved and not yet saved files.
* In a departure from previous practice, functions with
platform-independent code but platform-dependent behavior
are all grouped under platform/. This makes it easy to grep
for functions with platform-dependent behavior.
* Similarly, new (GUI-independent) code for all platforms is added
in the same platform.cpp file, guarded with #ifs. It turns out
that implementations for different platforms had a lot of shared
code that tended to go out of sync.
Extrustion top and bottom faces require a normal to be present.
Before this commit, the normal is always taken from the assembled
loop; if the loop could not be assembled (i.e. the loop is broken
or not coplanar) the normal will be (0,0,0), which breaks the sketch.
Also, loops are not generated when generating the sketch
to determine its bounding box.
This may result in spuriously broken sketches when e.g. undoing
a change that has broken a loop.
After this commit, loops are generated when generating for bounding
box, and if the loop could not be assembled, then the workplane
normal is used. This still results in failures when there is
no workplane, but those cases should be quite pathological.
Before this commit, a same orientation constraint created with
a workplane selected would only remove 2 of 3 DOFs. After
this commit, it properly removes all 3 DOFs.
Before this commit, lathe groups had three DOFs, which of course
could not actually move. After this commit, lathe groups have
zero DOFs, as expected.
This bug was introduced in commit 6dced80.
Before this commit, DoLater would be run as an idle callback,
which (depending on system performance) could either result in
a half-regenerated sketch being displayed, with only the dragged
entity updated, or no regeneration whatsoever during the drag.
After this commit, the GTK behavior matches macOS and Win32 ones.
Hiding the menu bar was only supported on macOS, and it is inherently
troublesome to port because keyboard accelerators on Win32 and GTK
are inherently dependent on the menu bar being visible.
On top of that, it's not clear how to bring it back if it's hidden
by accident.
Before this commit, when a point is constrained to an entity (point,
circle, arc of circle or line segment) by clicking on it,
the resulting constraint is not necessarily satisfied, and the next
regeneration may place the newly constrained point somewhere other
than the intended position. After this commit, the parameters
are modified to satisfy the constraint.
Commit f5485cb and its ancestors add a parameter to some constraints.
This parameter must be materialized and assigned a non-zero value via
ModifyToSatisfy for the solver library to not make unnecessary
changes to the sketch during the initial generation. For this, we
represent it explicitly instead of using hc.param(0), such that
the materialized constraint does not conflict with any user-defined
ones.
This commit follows 41365c5, which enabled export of Z coordinate
by using POLYLINE instead of LWPOLYLINE. After this commit, only
the AcDb2dPolyline/AcDb2dVertex are used when exporting flat views,
which may improve compatibility with 2d design packages.
The existing code is horrible and needlessly platform-dependent.
Even worse, it causes a freeze on GTK. Instead of propping that up
with a few more crutches, just fix the root cause.
The somewhat confusingly named set_has_alpha() function does not
affect whether alpha can be used during rendering to the area.
Rather, it affects whether alpha will be used when composing
the contents of the area with the window underneath it.
Before this commit, if any rendering mode except "show all occluded"
is enabled, points can be highlighted for corresponding to a DOF
after "Analyze → Degrees of Freedom" but then promptly occluded,
which is confusing.
whitequark
Bauke Conijn
Guido
EvilSpirit
Mat M
luzpaz