Lars-Peter Clausen f232a36141 common: Place HDMI interface registers into the IOB ... The paths from the HDMI interface registers to the IO pads are unconstrained. This means the P&R can in theory put the register anywhere which could lead to stability issues on the interface, depending on what else is in the fabric. To get predictable delays for the register to IO pad path place the register into the IOB section. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>		2015-04-23 14:33:47 +02:00
..
a5gt	a5gt:common: Added phy reset signal from ethernet in pin assignments	2015-01-23 12:31:41 +02:00
a5gte	a5gt3: common: corrected naming in pin assignments. added reset signal from FPGA2	2015-01-23 12:30:16 +02:00
a5soc	a5soc: fmcjesdadc1+hdmi version	2014-08-14 09:05:38 -04:00
ac701	AC701: Common, removed system clock constraint	2015-04-02 11:51:20 +03:00
c5soc	projects/fmcomms2/c5soc: Added video output. HPS SPI was replaced by 3 Wire SPI.	2014-08-27 21:46:23 +03:00
kc705	kc705/vc707: consistency fixes	2015-03-26 14:00:50 -04:00
kcu105	kcu105/adv7511: moved hdmi/spdif out of base design	2015-03-10 16:15:15 -04:00
mitx045	common: Place HDMI interface registers into the IOB	2015-04-23 14:33:47 +02:00
rfsom	common: Place HDMI interface registers into the IOB	2015-04-23 14:33:47 +02:00
vc707	kc705/vc707: consistency fixes	2015-03-26 14:00:58 -04:00
xilinx	util_dacfifo: Update BRAM DAC Fifo	2015-04-21 15:45:56 +03:00
zc702	common: Place HDMI interface registers into the IOB	2015-04-23 14:33:47 +02:00
zc706	common: Place HDMI interface registers into the IOB	2015-04-23 14:33:47 +02:00
zed	common: Place HDMI interface registers into the IOB	2015-04-23 14:33:47 +02:00