pluto_hdl_adi/library/axi_mc_speed/speed_detector.v

227 lines
6.5 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory of
// the repository (LICENSE_GPL2), and at: <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns / 1ps
module speed_detector
//----------- Paramters Declarations -------------------------------------------
#(
parameter AVERAGE_WINDOW = 32, // Averages data on the latest samples
parameter LOG_2_AW = 5, // Average window is 2 ^ LOG_2_AW
parameter SAMPLE_CLK_DECIM = 10000
)
//----------- Ports Declarations -----------------------------------------------
(
input clk_i,
input rst_i,
input [ 2:0] position_i, // position as determined by the sensors
output reg new_speed_o, // signals a new speed has been computed
output reg [31:0] current_speed_o, // data bus with the current speed
output reg [31:0] speed_o // data bus with the mediated speed
);
//------------------------------------------------------------------------------
//----------- Local Parameters -------------------------------------------------
//------------------------------------------------------------------------------
localparam AW = LOG_2_AW - 1;
localparam MAX_SPEED_CNT = 32'h10000;
//State machine
localparam RESET = 8'b00000001;
localparam INIT = 8'b00000010;
localparam CHANGE_POSITION = 8'b00000100;
localparam ADD_COUNTER = 8'b00001000;
localparam SUBSTRACT_MEM = 8'b00010000;
localparam UPDATE_MEM = 8'b00100000;
localparam IDLE = 8'b10000000;
//------------------------------------------------------------------------------
//----------- Registers Declarations -------------------------------------------
//------------------------------------------------------------------------------
reg [ 2:0] position_old;
reg [63:0] avg_register;
reg [63:0] avg_register_stable;
reg [31:0] cnt_period;
reg [31:0] decimation; // register used to divide by ten the speed
reg [31:0] cnt_period_old;
reg [31:0] fifo [0:((2**LOG_2_AW)-1)]; // 32 bit wide RAM
reg [AW:0] write_addr;
reg [AW:0] read_addr;
reg [31:0] sample_clk_div;
reg [ 7:0] state;
reg [ 7:0] next_state;
//------------------------------------------------------------------------------
//----------- Assign/Always Blocks ---------------------------------------------
//------------------------------------------------------------------------------
// Count ticks per position
always @(posedge clk_i)
begin
if(rst_i == 1'b1)
begin
cnt_period <= 32'b0;
decimation <= 32'b0;
end
else
begin
if(state != CHANGE_POSITION)
begin
if(decimation == 9)
begin
cnt_period <= cnt_period + 1;
decimation <= 32'b0;
end
else
begin
decimation <= decimation + 1;
end
end
else
begin
decimation <= 32'b0;
cnt_period <= 32'b0;
cnt_period_old <= cnt_period;
end
end
end
always @(posedge clk_i)
begin
if(rst_i == 1'b1)
begin
state <= RESET;
end
else
begin
state <= next_state;
end
end
always @*
begin
next_state = state;
case(state)
RESET:
begin
next_state = INIT;
end
INIT:
begin
if(position_i != position_old)
begin
next_state = CHANGE_POSITION;
end
end
CHANGE_POSITION:
begin
next_state = ADD_COUNTER;
end
ADD_COUNTER:
begin
next_state = SUBSTRACT_MEM;
end
SUBSTRACT_MEM:
begin
next_state = UPDATE_MEM;
end
UPDATE_MEM:
begin
next_state = IDLE;
end
IDLE:
begin
if(position_i != position_old)
begin
next_state = CHANGE_POSITION;
end
end
endcase
end
always @(posedge clk_i)
begin
case(state)
RESET:
begin
avg_register <= MAX_SPEED_CNT;
fifo[write_addr] <= MAX_SPEED_CNT;
end
INIT:
begin
end
CHANGE_POSITION:
begin
position_old <= position_i;
end
ADD_COUNTER:
begin
avg_register <= avg_register + cnt_period_old ;
end
SUBSTRACT_MEM:
begin
avg_register <= avg_register - fifo[write_addr];
end
UPDATE_MEM:
begin
fifo[write_addr] <= cnt_period_old;
write_addr <= write_addr + 1;
avg_register_stable <= avg_register;
end
IDLE:
begin
end
endcase
end
// Stable sampling frequency of the motor speed
always @(posedge clk_i)
begin
if(rst_i == 1'b1)
begin
sample_clk_div <= 0;
speed_o <= 0;
new_speed_o <= 0;
end
else
begin
if(sample_clk_div == SAMPLE_CLK_DECIM)
begin
sample_clk_div <= 0;
speed_o <=(avg_register_stable >> LOG_2_AW);
new_speed_o <= 1;
current_speed_o <= cnt_period_old;
end
else
begin
new_speed_o <= 0;
sample_clk_div <= sample_clk_div + 1;
end
end
end
endmodule