pluto_hdl_adi/library/axi_ad9643/axi_ad9643_if.v

256 lines
8.1 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// This is the LVDS/DDR interface, note that overrange is independent of data path,
// software will not be able to relate overrange to a specific sample!
// Alternative is to concatenate sample value and or status for data.
`timescale 1ns/100ps
module axi_ad9643_if (
// adc interface (clk, data, over-range)
adc_clk_in_p,
adc_clk_in_n,
adc_data_in_p,
adc_data_in_n,
adc_or_in_p,
adc_or_in_n,
// interface outputs
adc_clk,
adc_data_a,
adc_data_b,
adc_or_a,
adc_or_b,
adc_status,
// processor control signals
adc_ddr_edgesel,
adc_pin_mode,
// delay control signals
up_clk,
up_dld,
up_dwdata,
up_drdata,
delay_clk,
delay_rst,
delay_locked);
// This parameter controls the buffer type based on the target device.
parameter PCORE_BUFTYPE = 0;
parameter PCORE_IODELAY_GROUP = "adc_if_delay_group";
// adc interface (clk, data, over-range)
input adc_clk_in_p;
input adc_clk_in_n;
input [13:0] adc_data_in_p;
input [13:0] adc_data_in_n;
input adc_or_in_p;
input adc_or_in_n;
// interface outputs
output adc_clk;
output [13:0] adc_data_a;
output [13:0] adc_data_b;
output adc_or_a;
output adc_or_b;
output adc_status;
// processor control signals
input adc_ddr_edgesel;
input adc_pin_mode;
// delay control signals
input up_clk;
input [14:0] up_dld;
input [74:0] up_dwdata;
output [74:0] up_drdata;
input delay_clk;
input delay_rst;
output delay_locked;
// internal registers
reg adc_status = 'd0;
reg [13:0] adc_data_p = 'd0;
reg [13:0] adc_data_n = 'd0;
reg [13:0] adc_data_p_d = 'd0;
reg adc_or_p = 'd0;
reg adc_or_n = 'd0;
reg adc_or_p_d = 'd0;
reg [13:0] adc_data_mux_a = 'd0;
reg [13:0] adc_data_mux_b = 'd0;
reg adc_or_mux_a = 'd0;
reg adc_or_mux_b = 'd0;
reg [13:0] adc_data_a = 'd0;
reg [13:0] adc_data_b = 'd0;
reg adc_or_a = 'd0;
reg adc_or_b = 'd0;
// internal signals
wire [13:0] adc_data_p_s;
wire [13:0] adc_data_n_s;
wire adc_or_p_s;
wire adc_or_n_s;
genvar l_inst;
// two data pin modes are supported-
// mux - across clock edges (rising or falling edges),
// mux - within clock edges (lower 7 bits and upper 7 bits)
always @(posedge adc_clk) begin
adc_status <= 1'b1;
adc_data_p <= adc_data_p_s;
adc_data_n <= adc_data_n_s;
adc_data_p_d <= adc_data_p;
adc_or_p <= adc_or_p_s;
adc_or_n <= adc_or_n_s;
adc_or_p_d <= adc_or_p;
end
always @(posedge adc_clk) begin
if (adc_ddr_edgesel == 1'b1) begin
adc_data_mux_a <= adc_data_p_d;
adc_data_mux_b <= adc_data_n;
adc_or_mux_a <= adc_or_p_d;
adc_or_mux_b <= adc_or_n;
end else begin
adc_data_mux_a <= adc_data_n;
adc_data_mux_b <= adc_data_p;
adc_or_mux_a <= adc_or_n;
adc_or_mux_b <= adc_or_p;
end
end
always @(posedge adc_clk) begin
if (adc_pin_mode == 1'b1) begin
adc_data_a <= adc_data_mux_a;
adc_data_b <= adc_data_mux_b;
adc_or_a <= adc_or_mux_a;
adc_or_b <= adc_or_mux_b;
end else begin
adc_data_a <= { adc_data_mux_b[13], adc_data_mux_a[13],
adc_data_mux_b[12], adc_data_mux_a[12],
adc_data_mux_b[11], adc_data_mux_a[11],
adc_data_mux_b[10], adc_data_mux_a[10],
adc_data_mux_b[ 9], adc_data_mux_a[ 9],
adc_data_mux_b[ 8], adc_data_mux_a[ 8],
adc_data_mux_b[ 7], adc_data_mux_a[ 7]};
adc_data_b <= { adc_data_mux_b[ 6], adc_data_mux_a[ 6],
adc_data_mux_b[ 5], adc_data_mux_a[ 5],
adc_data_mux_b[ 4], adc_data_mux_a[ 4],
adc_data_mux_b[ 3], adc_data_mux_a[ 3],
adc_data_mux_b[ 2], adc_data_mux_a[ 2],
adc_data_mux_b[ 1], adc_data_mux_a[ 1],
adc_data_mux_b[ 0], adc_data_mux_a[ 0]};
adc_or_a <= adc_or_mux_a;
adc_or_b <= adc_or_mux_b;
end
end
// data interface
generate
for (l_inst = 0; l_inst <= 13; l_inst = l_inst + 1) begin : g_adc_if
ad_lvds_in #(
.BUFTYPE (PCORE_BUFTYPE),
.IODELAY_CTRL (0),
.IODELAY_GROUP (PCORE_IODELAY_GROUP))
i_adc_data (
.rx_clk (adc_clk),
.rx_data_in_p (adc_data_in_p[l_inst]),
.rx_data_in_n (adc_data_in_n[l_inst]),
.rx_data_p (adc_data_p_s[l_inst]),
.rx_data_n (adc_data_n_s[l_inst]),
.up_clk (up_clk),
.up_dld (up_dld[l_inst]),
.up_dwdata (up_dwdata[((l_inst*5)+4):(l_inst*5)]),
.up_drdata (up_drdata[((l_inst*5)+4):(l_inst*5)]),
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked ());
end
endgenerate
// over-range interface
ad_lvds_in #(
.BUFTYPE (PCORE_BUFTYPE),
.IODELAY_CTRL (1),
.IODELAY_GROUP (PCORE_IODELAY_GROUP))
i_adc_or (
.rx_clk (adc_clk),
.rx_data_in_p (adc_or_in_p),
.rx_data_in_n (adc_or_in_n),
.rx_data_p (adc_or_p_s),
.rx_data_n (adc_or_n_s),
.up_clk (up_clk),
.up_dld (up_dld[14]),
.up_dwdata (up_dwdata[74:70]),
.up_drdata (up_drdata[74:70]),
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked (delay_locked));
// clock
ad_lvds_clk #(
.BUFTYPE (PCORE_BUFTYPE))
i_adc_clk (
.clk_in_p (adc_clk_in_p),
.clk_in_n (adc_clk_in_n),
.clk (adc_clk));
endmodule
// ***************************************************************************
// ***************************************************************************