310 lines
13 KiB
Tcl
310 lines
13 KiB
Tcl
#
|
|
# The ADI JESD204 Core is released under the following license, which is
|
|
# different than all other HDL cores in this repository.
|
|
#
|
|
# Please read this, and understand the freedoms and responsibilities you have
|
|
# by using this source code/core.
|
|
#
|
|
# The JESD204 HDL, is copyright © 2016-2017 Analog Devices Inc.
|
|
#
|
|
# This core is free software, you can use run, copy, study, change, ask
|
|
# questions about and improve this core. Distribution of source, or resulting
|
|
# binaries (including those inside an FPGA or ASIC) require you to release the
|
|
# source of the entire project (excluding the system libraries provide by the
|
|
# tools/compiler/FPGA vendor). These are the terms of the GNU General Public
|
|
# License version 2 as published by the Free Software Foundation.
|
|
#
|
|
# This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License version 2
|
|
# along with this source code, and binary. If not, see
|
|
# <http://www.gnu.org/licenses/>.
|
|
#
|
|
# Commercial licenses (with commercial support) of this JESD204 core are also
|
|
# available under terms different than the General Public License. (e.g. they
|
|
# do not require you to accompany any image (FPGA or ASIC) using the JESD204
|
|
# core with any corresponding source code.) For these alternate terms you must
|
|
# purchase a license from Analog Devices Technology Licensing Office. Users
|
|
# interested in such a license should contact jesd204-licensing@analog.com for
|
|
# more information. This commercial license is sub-licensable (if you purchase
|
|
# chips from Analog Devices, incorporate them into your PCB level product, and
|
|
# purchase a JESD204 license, end users of your product will also have a
|
|
# license to use this core in a commercial setting without releasing their
|
|
# source code).
|
|
#
|
|
# In addition, we kindly ask you to acknowledge ADI in any program, application
|
|
# or publication in which you use this JESD204 HDL core. (You are not required
|
|
# to do so; it is up to your common sense to decide whether you want to comply
|
|
# with this request or not.) For general publications, we suggest referencing :
|
|
# “The design and implementation of the JESD204 HDL Core used in this project
|
|
# is copyright © 2016-2017, Analog Devices, Inc.”
|
|
#
|
|
|
|
package require qsys
|
|
|
|
source ../../scripts/adi_env.tcl
|
|
source $ad_hdl_dir/library/scripts/adi_ip_intel.tcl
|
|
|
|
set version 19.2
|
|
|
|
#
|
|
# Instantiates the Arria 10 native PHY and configures it for JESD204 operation.
|
|
# The datapath width is configured for 4 octets per beat.
|
|
#
|
|
# Optionally a soft-logic PCS is instantiated, this can be used if the lane rate
|
|
# is too high for the hard-logic PCS.
|
|
#
|
|
|
|
ad_ip_create jesd204_phy "ADI JESD204 PHY"
|
|
set_module_property COMPOSITION_CALLBACK jesd204_phy_composition_callback
|
|
set_module_property INTERNAL false
|
|
|
|
# parameters
|
|
|
|
ad_ip_parameter DEVICE STRING "Stratix 10" false
|
|
ad_ip_parameter ID NATURAL 0 false
|
|
ad_ip_parameter SOFT_PCS BOOLEAN false false
|
|
ad_ip_parameter TX_OR_RX_N BOOLEAN false false
|
|
ad_ip_parameter LANE_RATE FLOAT 10000 false
|
|
ad_ip_parameter REFCLK_FREQUENCY FLOAT 500.0 false
|
|
ad_ip_parameter NUM_OF_LANES POSITIVE 4 false
|
|
ad_ip_parameter REGISTER_INPUTS INTEGER 0 false
|
|
ad_ip_parameter LANE_INVERT INTEGER 0 false
|
|
ad_ip_parameter BONDING_CLOCKS_EN BOOLEAN false false
|
|
|
|
proc jesd204_phy_composition_callback {} {
|
|
|
|
global version
|
|
|
|
set device [get_parameter_value "DEVICE"]
|
|
set soft_pcs [get_parameter_value "SOFT_PCS"]
|
|
set tx [get_parameter_value "TX_OR_RX_N"]
|
|
set lane_rate [get_parameter_value "LANE_RATE"]
|
|
set refclk_frequency [get_parameter_value "REFCLK_FREQUENCY"]
|
|
set id [get_parameter_value "ID"]
|
|
set num_of_lanes [get_parameter_value "NUM_OF_LANES"]
|
|
set register_inputs [get_parameter_value "REGISTER_INPUTS"]
|
|
set lane_invert [get_parameter_value "LANE_INVERT"]
|
|
set bonding_clocks_en [get_parameter_value "BONDING_CLOCKS_EN"]
|
|
|
|
set link_clk_frequency [expr $lane_rate / 40]
|
|
|
|
if {[string equal $device "Arria 10"]} {
|
|
set device_type 1
|
|
} elseif {[string equal $device "Stratix 10"]} {
|
|
set device_type 2
|
|
} else {
|
|
set device_type 0
|
|
}
|
|
|
|
add_instance link_clock clock_source 19.3
|
|
set_instance_parameter_value link_clock {clockFrequency} [expr $link_clk_frequency*1000000]
|
|
add_interface link_clk clock sink
|
|
set_interface_property link_clk EXPORT_OF link_clock.clk_in
|
|
add_interface link_reset reset sink
|
|
set_interface_property link_reset EXPORT_OF link_clock.clk_in_reset
|
|
|
|
## Arria10
|
|
if {$device_type == 1} {
|
|
add_instance native_phy altera_xcvr_native_a10 19.1
|
|
set_instance_parameter_value native_phy {enh_txfifo_mode} "Phase compensation"
|
|
set_instance_parameter_value native_phy {enh_rxfifo_mode} "Phase compensation"
|
|
set_instance_property native_phy SUPPRESS_ALL_WARNINGS true
|
|
set_instance_property native_phy SUPPRESS_ALL_INFO_MESSAGES true
|
|
## Stratix 10
|
|
} elseif {$device_type == 2} {
|
|
add_instance native_phy altera_xcvr_native_s10_htile $version
|
|
set_instance_parameter_value native_phy {tx_fifo_mode} "Phase compensation"
|
|
set_instance_parameter_value native_phy {rx_fifo_mode} "Phase compensation"
|
|
## Unsupported device
|
|
} else {
|
|
send_message error "Only Arria 10 and Stratix 10 are supported."
|
|
}
|
|
|
|
if {$soft_pcs} {
|
|
set_instance_parameter_value native_phy {protocol_mode} "basic_enh"
|
|
} else {
|
|
set_instance_parameter_value native_phy {protocol_mode} "basic_std"
|
|
set_instance_parameter_value native_phy {std_pcs_pma_width} 20
|
|
|
|
if {$tx} {
|
|
set_instance_parameter_value native_phy {std_tx_byte_ser_mode} "Serialize x2"
|
|
set_instance_parameter_value native_phy {std_tx_8b10b_enable} 1
|
|
set_instance_parameter_value native_phy {std_tx_polinv_enable} 1
|
|
set_instance_parameter_value native_phy {enable_port_tx_polinv} 1
|
|
} else {
|
|
set_instance_parameter_value native_phy {std_rx_byte_deser_mode} "Deserialize x2"
|
|
set_instance_parameter_value native_phy {std_rx_8b10b_enable} 1
|
|
set_instance_parameter_value native_phy {std_rx_word_aligner_mode} "manual (PLD controlled)"
|
|
set_instance_parameter_value native_phy {std_rx_word_aligner_pattern_len} 20
|
|
set_instance_parameter_value native_phy {std_rx_word_aligner_pattern} 0xA0D7C
|
|
set_instance_parameter_value native_phy {enable_port_rx_std_wa_patternalign} 1
|
|
set_instance_parameter_value native_phy {std_rx_polinv_enable} 1
|
|
set_instance_parameter_value native_phy {enable_port_rx_polinv} 1
|
|
}
|
|
}
|
|
|
|
if {$tx} {
|
|
set_instance_parameter_value native_phy {duplex_mode} "tx"
|
|
if {$bonding_clocks_en && $num_of_lanes > 6} {
|
|
set_instance_parameter_value native_phy {bonded_mode} "pma_only"
|
|
} else {
|
|
set_instance_parameter_value native_phy {bonded_mode} "not_bonded"
|
|
}
|
|
set_instance_parameter_value native_phy {enable_port_tx_pma_elecidle} 0
|
|
} else {
|
|
set_instance_parameter_value native_phy {duplex_mode} "rx"
|
|
set_instance_parameter_value native_phy {set_cdr_refclk_freq} $refclk_frequency
|
|
set_instance_parameter_value native_phy {enable_port_rx_is_lockedtodata} 1
|
|
set_instance_parameter_value native_phy {enable_port_rx_is_lockedtoref} 0
|
|
set_instance_parameter_value native_phy {enable_ports_rx_manual_cdr_mode} 0
|
|
}
|
|
|
|
set_instance_parameter_value native_phy {channels} $num_of_lanes
|
|
set_instance_parameter_value native_phy {set_data_rate} $lane_rate
|
|
set_instance_parameter_value native_phy {enable_simple_interface} 1
|
|
set_instance_parameter_value native_phy {enh_pcs_pma_width} 40
|
|
set_instance_parameter_value native_phy {enh_pld_pcs_width} 40
|
|
set_instance_parameter_value native_phy {rcfg_enable} 1
|
|
set_instance_parameter_value native_phy {rcfg_shared} 0
|
|
set_instance_parameter_value native_phy {rcfg_jtag_enable} 0
|
|
set_instance_parameter_value native_phy {rcfg_sv_file_enable} 0
|
|
set_instance_parameter_value native_phy {rcfg_h_file_enable} 0
|
|
set_instance_parameter_value native_phy {rcfg_mif_file_enable} 0
|
|
set_instance_parameter_value native_phy {set_user_identifier} $id
|
|
set_instance_parameter_value native_phy {set_capability_reg_enable} 1
|
|
set_instance_parameter_value native_phy {set_csr_soft_logic_enable} 1
|
|
set_instance_parameter_value native_phy {set_prbs_soft_logic_enable} 0
|
|
|
|
add_instance phy_glue jesd204_phy_glue 1.0
|
|
set_instance_parameter_value phy_glue DEVICE $device
|
|
set_instance_parameter_value phy_glue TX_OR_RX_N $tx
|
|
set_instance_parameter_value phy_glue SOFT_PCS $soft_pcs
|
|
set_instance_parameter_value phy_glue NUM_OF_LANES $num_of_lanes
|
|
set_instance_parameter_value phy_glue LANE_INVERT $lane_invert
|
|
set_instance_parameter_value phy_glue BONDING_CLOCKS_EN $bonding_clocks_en
|
|
|
|
add_interface reconfig_clk clock sink
|
|
set_interface_property reconfig_clk EXPORT_OF phy_glue.reconfig_clk
|
|
|
|
add_interface reconfig_reset reset sink
|
|
set_interface_property reconfig_reset EXPORT_OF phy_glue.reconfig_reset
|
|
|
|
|
|
if {$tx} {
|
|
if {$bonding_clocks_en && $num_of_lanes > 6} {
|
|
add_interface bonding_clocks hssi_bonded_clock end
|
|
set_interface_property bonding_clocks EXPORT_OF phy_glue.tx_bonding_clocks
|
|
add_connection phy_glue.phy_tx_bonding_clocks native_phy.tx_bonding_clocks
|
|
} else {
|
|
add_interface serial_clk_x1 hssi_serial_clock end
|
|
set_interface_property serial_clk_x1 EXPORT_OF phy_glue.tx_serial_clk_x1
|
|
if {$num_of_lanes > 6} {
|
|
add_interface serial_clk_xN hssi_serial_clock end
|
|
set_interface_property serial_clk_xN EXPORT_OF phy_glue.tx_serial_clk_xN
|
|
}
|
|
add_connection phy_glue.phy_tx_serial_clk0 native_phy.tx_serial_clk0
|
|
}
|
|
|
|
add_connection link_clock.clk phy_glue.tx_coreclkin
|
|
|
|
if { $soft_pcs == true && $device_type == 1 } {
|
|
add_connection phy_glue.phy_tx_enh_data_valid native_phy.tx_enh_data_valid
|
|
}
|
|
|
|
foreach x {reconfig_clk reconfig_reset reconfig_avmm tx_coreclkin \
|
|
tx_clkout tx_parallel_data unused_tx_parallel_data} {
|
|
add_connection phy_glue.phy_${x} native_phy.${x}
|
|
}
|
|
|
|
foreach x {serial_data analogreset digitalreset cal_busy} {
|
|
add_interface ${x} conduit end
|
|
set_interface_property ${x} EXPORT_OF native_phy.tx_${x}
|
|
}
|
|
|
|
if {$soft_pcs == false} {
|
|
add_connection phy_glue.phy_tx_datak native_phy.tx_datak
|
|
add_connection phy_glue.phy_tx_polinv native_phy.tx_polinv
|
|
}
|
|
|
|
## Startix 10
|
|
if {$device_type == 2} {
|
|
foreach x {analogreset_stat digitalreset_stat} {
|
|
add_interface ${x} conduit end
|
|
set_interface_property ${x} EXPORT_OF native_phy.tx_${x}
|
|
}
|
|
}
|
|
|
|
} else {
|
|
|
|
add_interface ref_clk clock sink
|
|
set_interface_property ref_clk EXPORT_OF phy_glue.rx_cdr_refclk0
|
|
|
|
add_connection link_clock.clk phy_glue.rx_coreclkin
|
|
|
|
foreach x {serial_data analogreset digitalreset cal_busy is_lockedtodata} {
|
|
add_interface ${x} conduit end
|
|
set_interface_property ${x} EXPORT_OF native_phy.rx_${x}
|
|
}
|
|
|
|
foreach x {reconfig_clk reconfig_reset reconfig_avmm rx_coreclkin \
|
|
rx_clkout rx_parallel_data rx_cdr_refclk0} {
|
|
add_connection phy_glue.phy_${x} native_phy.${x}
|
|
}
|
|
|
|
if {$soft_pcs == false} {
|
|
foreach x {rx_datak rx_disperr rx_errdetect rx_std_wa_patternalign} {
|
|
add_connection phy_glue.phy_${x} native_phy.${x}
|
|
}
|
|
add_connection phy_glue.phy_rx_polinv native_phy.rx_polinv
|
|
}
|
|
|
|
## Startix 10
|
|
if {$device_type == 2} {
|
|
foreach x {analogreset_stat digitalreset_stat} {
|
|
add_interface ${x} conduit end
|
|
set_interface_property ${x} EXPORT_OF native_phy.rx_${x}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
for {set i 0} {$i < $num_of_lanes} {incr i} {
|
|
add_interface reconfig_avmm_${i} avalon slave
|
|
set_interface_property reconfig_avmm_${i} EXPORT_OF phy_glue.reconfig_avmm_${i}
|
|
|
|
add_interface phy_${i} conduit start
|
|
|
|
if {$tx} {
|
|
if {$soft_pcs} {
|
|
add_instance soft_pcs_${i} jesd204_soft_pcs_tx 1.0
|
|
set_instance_parameter_value soft_pcs_${i} INVERT_OUTPUTS \
|
|
[expr ($lane_invert >> $i) & 1]
|
|
add_connection link_clock.clk soft_pcs_${i}.clock
|
|
add_connection link_clock.clk_reset soft_pcs_${i}.reset
|
|
add_connection soft_pcs_${i}.tx_raw_data phy_glue.tx_raw_data_${i}
|
|
|
|
set_interface_property phy_${i} EXPORT_OF soft_pcs_${i}.tx_phy
|
|
} else {
|
|
set_interface_property phy_${i} EXPORT_OF phy_glue.tx_phy_${i}
|
|
}
|
|
} else {
|
|
if {$soft_pcs} {
|
|
add_instance soft_pcs_${i} jesd204_soft_pcs_rx 1.0
|
|
set_instance_parameter_value soft_pcs_${i} REGISTER_INPUTS $register_inputs
|
|
set_instance_parameter_value soft_pcs_${i} INVERT_INPUTS \
|
|
[expr ($lane_invert >> $i) & 1]
|
|
add_connection link_clock.clk soft_pcs_${i}.clock
|
|
add_connection link_clock.clk_reset soft_pcs_${i}.reset
|
|
add_connection phy_glue.rx_raw_data_${i} soft_pcs_${i}.rx_raw_data
|
|
|
|
set_interface_property phy_${i} EXPORT_OF soft_pcs_${i}.rx_phy
|
|
} else {
|
|
set_interface_property phy_${i} EXPORT_OF phy_glue.rx_phy_${i}
|
|
}
|
|
}
|
|
}
|
|
}
|