pluto_hdl_adi/library/common/up_axi.v

227 lines
7.5 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module up_axi #(
parameter ADDRESS_WIDTH = 14,
parameter AXI_ADDRESS_WIDTH = 32) (
// reset and clocks
input up_rstn,
input up_clk,
// axi4 interface
input up_axi_awvalid,
input [AXI_AW:0] up_axi_awaddr,
output reg up_axi_awready,
input up_axi_wvalid,
input [31:0] up_axi_wdata,
input [ 3:0] up_axi_wstrb,
output reg up_axi_wready,
output reg up_axi_bvalid,
output [ 1:0] up_axi_bresp,
input up_axi_bready,
input up_axi_arvalid,
input [AXI_AW:0] up_axi_araddr,
output reg up_axi_arready,
output reg up_axi_rvalid,
output [ 1:0] up_axi_rresp,
output reg [31:0] up_axi_rdata,
input up_axi_rready,
// pcore interface
output reg up_wreq,
output reg [AW:0] up_waddr,
output reg [31:0] up_wdata,
input up_wack,
output reg up_rreq,
output reg [AW:0] up_raddr,
input [31:0] up_rdata,
input up_rack);
localparam AXI_AW = AXI_ADDRESS_WIDTH - 1;
localparam AW = ADDRESS_WIDTH - 1;
// internal registers
reg up_wack_d = 'd0;
reg up_wsel = 'd0;
reg [ 4:0] up_wcount = 'd0;
reg up_rack_d = 'd0;
reg [31:0] up_rdata_d = 'd0;
reg up_rsel = 'd0;
reg [ 4:0] up_rcount = 'd0;
// internal signals
wire up_wack_s;
wire up_rack_s;
wire [31:0] up_rdata_s;
// write channel interface
assign up_axi_bresp = 2'd0;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_axi_awready <= 'd0;
up_axi_wready <= 'd0;
up_axi_bvalid <= 'd0;
end else begin
if (up_axi_awready == 1'b1) begin
up_axi_awready <= 1'b0;
end else if (up_wack_s == 1'b1) begin
up_axi_awready <= 1'b1;
end
if (up_axi_wready == 1'b1) begin
up_axi_wready <= 1'b0;
end else if (up_wack_s == 1'b1) begin
up_axi_wready <= 1'b1;
end
if ((up_axi_bready == 1'b1) && (up_axi_bvalid == 1'b1)) begin
up_axi_bvalid <= 1'b0;
end else if (up_wack_d == 1'b1) begin
up_axi_bvalid <= 1'b1;
end
end
end
assign up_wack_s = (up_wcount == 5'h1f) ? 1'b1 : (up_wcount[4] & up_wack);
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_wack_d <= 'd0;
up_wsel <= 'd0;
up_wreq <= 'd0;
up_waddr <= 'd0;
up_wdata <= 'd0;
up_wcount <= 'd0;
end else begin
up_wack_d <= up_wack_s;
if (up_wsel == 1'b1) begin
if ((up_axi_bready == 1'b1) && (up_axi_bvalid == 1'b1)) begin
up_wsel <= 1'b0;
end
up_wreq <= 1'b0;
up_waddr <= up_waddr;
up_wdata <= up_wdata;
end else begin
up_wsel <= up_axi_awvalid & up_axi_wvalid;
up_wreq <= up_axi_awvalid & up_axi_wvalid;
up_waddr <= up_axi_awaddr[AW+2:2];
up_wdata <= up_axi_wdata;
end
if (up_wack_s == 1'b1) begin
up_wcount <= 5'h00;
end else if (up_wcount[4] == 1'b1) begin
up_wcount <= up_wcount + 1'b1;
end else if (up_wreq == 1'b1) begin
up_wcount <= 5'h10;
end
end
end
// read channel interface
assign up_axi_rresp = 2'd0;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_axi_arready <= 'd0;
up_axi_rvalid <= 'd0;
up_axi_rdata <= 'd0;
end else begin
if (up_axi_arready == 1'b1) begin
up_axi_arready <= 1'b0;
end else if (up_rack_s == 1'b1) begin
up_axi_arready <= 1'b1;
end
if ((up_axi_rready == 1'b1) && (up_axi_rvalid == 1'b1)) begin
up_axi_rvalid <= 1'b0;
up_axi_rdata <= 32'd0;
end else if (up_rack_d == 1'b1) begin
up_axi_rvalid <= 1'b1;
up_axi_rdata <= up_rdata_d;
end
end
end
assign up_rack_s = (up_rcount == 5'h1f) ? 1'b1 : (up_rcount[4] & up_rack);
assign up_rdata_s = (up_rcount == 5'h1f) ? {2{16'hdead}} : up_rdata;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_rack_d <= 'd0;
up_rdata_d <= 'd0;
up_rsel <= 'd0;
up_rreq <= 'd0;
up_raddr <= 'd0;
up_rcount <= 'd0;
end else begin
up_rack_d <= up_rack_s;
up_rdata_d <= up_rdata_s;
if (up_rsel == 1'b1) begin
if ((up_axi_rready == 1'b1) && (up_axi_rvalid == 1'b1)) begin
up_rsel <= 1'b0;
end
up_rreq <= 1'b0;
up_raddr <= up_raddr;
end else begin
up_rsel <= up_axi_arvalid;
up_rreq <= up_axi_arvalid;
up_raddr <= up_axi_araddr[AW+2:2];
end
if (up_rack_s == 1'b1) begin
up_rcount <= 5'h00;
end else if (up_rcount[4] == 1'b1) begin
up_rcount <= up_rcount + 1'b1;
end else if (up_rreq == 1'b1) begin
up_rcount <= 5'h10;
end
end
end
endmodule
// ***************************************************************************
// ***************************************************************************