pluto_hdl_adi/library/util_rfifo/util_rfifo.v

390 lines
13 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module util_rfifo (
// d-in interface
din_rstn,
din_clk,
din_enable_0,
din_valid_0,
din_data_0,
din_enable_1,
din_valid_1,
din_data_1,
din_enable_2,
din_valid_2,
din_data_2,
din_enable_3,
din_valid_3,
din_data_3,
din_enable_4,
din_valid_4,
din_data_4,
din_enable_5,
din_valid_5,
din_data_5,
din_enable_6,
din_valid_6,
din_data_6,
din_enable_7,
din_valid_7,
din_data_7,
din_unf,
// d-out interface
dout_rst,
dout_clk,
dout_enable_0,
dout_valid_0,
dout_data_0,
dout_enable_1,
dout_valid_1,
dout_data_1,
dout_enable_2,
dout_valid_2,
dout_data_2,
dout_enable_3,
dout_valid_3,
dout_data_3,
dout_enable_4,
dout_valid_4,
dout_data_4,
dout_enable_5,
dout_valid_5,
dout_data_5,
dout_enable_6,
dout_valid_6,
dout_data_6,
dout_enable_7,
dout_valid_7,
dout_data_7,
dout_unf);
// parameters
parameter NUM_OF_CHANNELS = 4;
parameter DIN_DATA_WIDTH = 32;
parameter DOUT_DATA_WIDTH = 64;
parameter DIN_ADDRESS_WIDTH = 8;
localparam M_MEM_RATIO = DOUT_DATA_WIDTH/DIN_DATA_WIDTH;
localparam ADDRESS_WIDTH = (DIN_ADDRESS_WIDTH > 4) ? DIN_ADDRESS_WIDTH : 4;
localparam DATA_WIDTH = DOUT_DATA_WIDTH * NUM_OF_CHANNELS;
localparam T_DIN_DATA_WIDTH = DIN_DATA_WIDTH * 8;
localparam T_DOUT_DATA_WIDTH = DOUT_DATA_WIDTH * 8;
// d-in interface
input din_rstn;
input din_clk;
output din_enable_0;
output din_valid_0;
input [DIN_DATA_WIDTH-1:0] din_data_0;
output din_enable_1;
output din_valid_1;
input [DIN_DATA_WIDTH-1:0] din_data_1;
output din_enable_2;
output din_valid_2;
input [DIN_DATA_WIDTH-1:0] din_data_2;
output din_enable_3;
output din_valid_3;
input [DIN_DATA_WIDTH-1:0] din_data_3;
output din_enable_4;
output din_valid_4;
input [DIN_DATA_WIDTH-1:0] din_data_4;
output din_enable_5;
output din_valid_5;
input [DIN_DATA_WIDTH-1:0] din_data_5;
output din_enable_6;
output din_valid_6;
input [DIN_DATA_WIDTH-1:0] din_data_6;
output din_enable_7;
output din_valid_7;
input [DIN_DATA_WIDTH-1:0] din_data_7;
input din_unf;
// dout interface
input dout_rst;
input dout_clk;
input dout_enable_0;
input dout_valid_0;
output [DOUT_DATA_WIDTH-1:0] dout_data_0;
input dout_enable_1;
input dout_valid_1;
output [DOUT_DATA_WIDTH-1:0] dout_data_1;
input dout_enable_2;
input dout_valid_2;
output [DOUT_DATA_WIDTH-1:0] dout_data_2;
input dout_enable_3;
input dout_valid_3;
output [DOUT_DATA_WIDTH-1:0] dout_data_3;
input dout_enable_4;
input dout_valid_4;
output [DOUT_DATA_WIDTH-1:0] dout_data_4;
input dout_enable_5;
input dout_valid_5;
output [DOUT_DATA_WIDTH-1:0] dout_data_5;
input dout_enable_6;
input dout_valid_6;
output [DOUT_DATA_WIDTH-1:0] dout_data_6;
input dout_enable_7;
input dout_valid_7;
output [DOUT_DATA_WIDTH-1:0] dout_data_7;
output dout_unf;
// internal registers
reg [(DATA_WIDTH-1):0] din_wdata = 'd0;
reg [(ADDRESS_WIDTH-1):0] din_waddr = 'd0;
reg din_wr = 'd0;
reg [ 6:0] din_req_cnt = 'd0;
reg [ 7:0] din_enable_m1 = 'd0;
reg [ 7:0] din_enable = 'd0;
reg din_req_t_m1 = 'd0;
reg din_req_t_m2 = 'd0;
reg din_req_t_m3 = 'd0;
reg [(T_DOUT_DATA_WIDTH+1):0] dout_data = 'd0;
reg [(DATA_WIDTH-1):0] dout_rdata = 'd0;
reg [ 7:0] dout_enable = 'd0;
reg dout_req_t = 'd0;
reg [(ADDRESS_WIDTH-1):0] dout_raddr = 'd0;
reg dout_unf_m1 = 'd0;
reg dout_unf = 'd0;
// internal signals
wire [(T_DIN_DATA_WIDTH-1):0] din_data_s;
wire din_req_s;
wire [ 7:0] dout_enable_s;
wire [ 7:0] dout_valid_s;
wire [(T_DOUT_DATA_WIDTH+1):0] dout_data_s;
wire [(DATA_WIDTH-1):0] dout_rdata_s;
// variables
genvar n;
// enables & valids
assign din_enable_7 = din_enable[7];
assign din_enable_6 = din_enable[6];
assign din_enable_5 = din_enable[5];
assign din_enable_4 = din_enable[4];
assign din_enable_3 = din_enable[3];
assign din_enable_2 = din_enable[2];
assign din_enable_1 = din_enable[1];
assign din_enable_0 = din_enable[0];
assign din_valid_7 = din_req_cnt[6];
assign din_valid_6 = din_req_cnt[6];
assign din_valid_5 = din_req_cnt[6];
assign din_valid_4 = din_req_cnt[6];
assign din_valid_3 = din_req_cnt[6];
assign din_valid_2 = din_req_cnt[6];
assign din_valid_1 = din_req_cnt[6];
assign din_valid_0 = din_req_cnt[6];
assign din_data_s = { din_data_7, din_data_6, din_data_5, din_data_4,
din_data_3, din_data_2, din_data_1, din_data_0};
// simple data transfer-- no ovf/unf handling- read-bw > write-bw
// dout_width >= din_width only
generate
for (n = 0; n < NUM_OF_CHANNELS; n = n + 1) begin: g_in
if (M_MEM_RATIO == 1) begin
always @(posedge din_clk) begin
if (din_req_cnt[6] == 1'b1) begin
din_wdata[((DOUT_DATA_WIDTH*(n+1))-1):(DOUT_DATA_WIDTH*n)] <=
din_data_s[((DIN_DATA_WIDTH*(n+1))-1):(DIN_DATA_WIDTH*n)];
end
end
end else begin
always @(posedge din_clk) begin
if (din_req_cnt[6] == 1'b1) begin
din_wdata[((DOUT_DATA_WIDTH*(n+1))-1):(DOUT_DATA_WIDTH*n)] <=
{din_data_s[((DIN_DATA_WIDTH*(n+1))-1):(DIN_DATA_WIDTH*n)],
din_wdata[((DOUT_DATA_WIDTH*(n+1))-1):(DIN_DATA_WIDTH+(DOUT_DATA_WIDTH*n))]};
end
end
end
end
endgenerate
always @(posedge din_clk or negedge din_rstn) begin
if (din_rstn == 1'b0) begin
din_waddr <= 'd0;
din_wr <= 1'd0;
end else begin
if (din_wr == 1'b1) begin
din_waddr <= din_waddr + 1'b1;
end
case (M_MEM_RATIO)
8: din_wr <= din_req_cnt[6] & din_req_cnt[2] & din_req_cnt[1] & din_req_cnt[0];
4: din_wr <= din_req_cnt[6] & din_req_cnt[1] & din_req_cnt[0];
2: din_wr <= din_req_cnt[6] & din_req_cnt[0];
default: din_wr <= din_req_cnt[6];
endcase
end
end
always @(posedge din_clk or negedge din_rstn) begin
if (din_rstn == 1'b0) begin
din_req_cnt <= 'd0;
end else begin
if (din_req_s == 1'b1) begin
case (M_MEM_RATIO)
8: din_req_cnt <= 7'h40;
4: din_req_cnt <= 7'h60;
2: din_req_cnt <= 7'h70;
default: din_req_cnt <= 7'h78;
endcase
end else if (din_req_cnt[6] == 1'b1) begin
din_req_cnt <= din_req_cnt + 1'b1;
end
end
end
assign din_req_s = din_req_t_m3 ^ din_req_t_m2;
always @(posedge din_clk or negedge din_rstn) begin
if (din_rstn == 1'b0) begin
din_enable_m1 <= 'd0;
din_enable <= 'd0;
din_req_t_m1 <= 'd0;
din_req_t_m2 <= 'd0;
din_req_t_m3 <= 'd0;
end else begin
din_enable_m1 <= dout_enable;
din_enable <= din_enable_m1;
din_req_t_m1 <= dout_req_t;
din_req_t_m2 <= din_req_t_m1;
din_req_t_m3 <= din_req_t_m2;
end
end
// read interface (bus expansion and/or clock conversion)
assign dout_enable_s = { dout_enable_7, dout_enable_6, dout_enable_5, dout_enable_4,
dout_enable_3, dout_enable_2, dout_enable_1, dout_enable_0};
assign dout_valid_s = { dout_valid_7, dout_valid_6, dout_valid_5, dout_valid_4,
dout_valid_3, dout_valid_2, dout_valid_1, dout_valid_0};
generate
if (NUM_OF_CHANNELS >= 8) begin
assign dout_data_s = dout_rdata;
end else begin
assign dout_data_s[(T_DOUT_DATA_WIDTH+1):DATA_WIDTH] = 'd0;
assign dout_data_s[(DATA_WIDTH-1):0] = dout_rdata;
end
endgenerate
assign dout_data_7 = dout_data[((DOUT_DATA_WIDTH*8)-1):(DOUT_DATA_WIDTH*7)];
assign dout_data_6 = dout_data[((DOUT_DATA_WIDTH*7)-1):(DOUT_DATA_WIDTH*6)];
assign dout_data_5 = dout_data[((DOUT_DATA_WIDTH*6)-1):(DOUT_DATA_WIDTH*5)];
assign dout_data_4 = dout_data[((DOUT_DATA_WIDTH*5)-1):(DOUT_DATA_WIDTH*4)];
assign dout_data_3 = dout_data[((DOUT_DATA_WIDTH*4)-1):(DOUT_DATA_WIDTH*3)];
assign dout_data_2 = dout_data[((DOUT_DATA_WIDTH*3)-1):(DOUT_DATA_WIDTH*2)];
assign dout_data_1 = dout_data[((DOUT_DATA_WIDTH*2)-1):(DOUT_DATA_WIDTH*1)];
assign dout_data_0 = dout_data[((DOUT_DATA_WIDTH*1)-1):(DOUT_DATA_WIDTH*0)];
generate
for (n = 0; n < NUM_OF_CHANNELS; n = n + 1) begin: g_out
always @(posedge dout_clk) begin
if (dout_rst == 1'b1) begin
dout_data[((DOUT_DATA_WIDTH*(n+1))-1):(DOUT_DATA_WIDTH*n)] <= 'd0;
end else if (dout_valid_s[n] == 1'b1) begin
dout_data[((DOUT_DATA_WIDTH*(n+1))-1):(DOUT_DATA_WIDTH*n)] <=
dout_data_s[((DOUT_DATA_WIDTH*(n+1))-1):(DOUT_DATA_WIDTH*n)];
end
end
end
endgenerate
always @(posedge dout_clk) begin
dout_rdata <= dout_rdata_s;
end
always @(posedge dout_clk) begin
if (dout_rst == 1'b1) begin
dout_enable <= 'd0;
dout_req_t <= 'd0;
dout_raddr <= 'd0;
end else begin
dout_enable <= dout_enable_s;
if (dout_valid_s[0] == 1'b1) begin
if (dout_raddr[2:0] == 3'd0) begin
dout_req_t <= ~dout_req_t;
end
dout_raddr <= dout_raddr + 1'b1;
end
end
end
always @(posedge dout_clk) begin
if (dout_rst == 1'b1) begin
dout_unf_m1 <= 'd0;
dout_unf <= 'd0;
end else begin
dout_unf_m1 <= din_unf;
dout_unf <= dout_unf_m1;
end
end
// instantiations
ad_mem #(.ADDRESS_WIDTH(ADDRESS_WIDTH), .DATA_WIDTH(DATA_WIDTH)) i_mem (
.clka (din_clk),
.wea (din_wr),
.addra (din_waddr),
.dina (din_wdata),
.clkb (dout_clk),
.addrb (dout_raddr),
.doutb (dout_rdata_s));
endmodule
// ***************************************************************************
// ***************************************************************************