66 lines
2.9 KiB
Tcl
66 lines
2.9 KiB
Tcl
|
|
source ../../scripts/adi_env.tcl
|
|
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
|
|
source $ad_hdl_dir/projects/scripts/adi_board.tcl
|
|
|
|
# The get_env_param procedure retrieves parameter value from the environment if exists,
|
|
# other case returns the default value specified in its second parameter field.
|
|
#
|
|
# How to use over-writable parameters from the environment:
|
|
#
|
|
# e.g.
|
|
# make JESD_MODE=8B10B RX_JESD_L=4 RX_JESD_M=8 TX_JESD_L=4 TX_JESD_M=8
|
|
# make JESD_MODE=64B66B RX_JESD_L=2 RX_JESD_M=8 TX_JESD_L=4 TX_JESD_M=16
|
|
# make JESD_MODE=64B66B RX_RATE=24.75 TX_RATE=24.75 REF_CLK_RATE=250 RX_JESD_M=4 RX_JESD_L=4 RX_JESD_S=2 RX_JESD_NP=12 TX_JESD_M=4 TX_JESD_L=4 TX_JESD_S=2 TX_JESD_NP=12 RX_PLL_SEL=1 TX_PLL_SEL=1
|
|
#
|
|
# RX_RATE,TX_RATE,REF_CLK_RATE used only in 64B66B mode
|
|
#
|
|
# Parameter description:
|
|
# JESD_MODE : used link layer encoder mode
|
|
# 64B66B - 64b66b link layer defined in JESD 204C, uses Xilinx IP as Physical layer
|
|
# 8B10B - 8b10b link layer defined in JESD 204B, uses ADI IP as Physical layer
|
|
#
|
|
# RX_RATE : line rate of the Rx link ( MxFE to FPGA ) used in 64B66B mode
|
|
# TX_RATE : line rate of the Tx link ( FPGA to MxFE ) used in 64B66B mode
|
|
# REF_CLK_RATE : frequency of reference clock in MHz used in 64B66B mode
|
|
# [RX/TX]_JESD_M : number of converters per link
|
|
# [RX/TX]_JESD_L : number of lanes per link
|
|
# [RX/TX]_JESD_NP : number of bits per sample, only 16 is supported
|
|
# [RX/TX]_NUM_LINKS : number of links, matches numer of MxFE devices
|
|
|
|
adi_project ad_quadmxfe1_ebz_vcu118 0 [list \
|
|
JESD_MODE [get_env_param JESD_MODE 64B66B ] \
|
|
RX_RATE [get_env_param RX_RATE 16.5 ] \
|
|
TX_RATE [get_env_param TX_RATE 16.5 ] \
|
|
RX_PLL_SEL [get_env_param RX_PLL_SEL 2 ] \
|
|
TX_PLL_SEL [get_env_param TX_PLL_SEL 2 ] \
|
|
REF_CLK_RATE [get_env_param REF_CLK_RATE 250 ] \
|
|
RX_JESD_M [get_env_param RX_JESD_M 8 ] \
|
|
RX_JESD_L [get_env_param RX_JESD_L 2 ] \
|
|
RX_JESD_S [get_env_param RX_JESD_S 1 ] \
|
|
RX_JESD_NP [get_env_param RX_JESD_NP 16 ] \
|
|
RX_NUM_LINKS [get_env_param RX_NUM_LINKS 4 ] \
|
|
TX_JESD_M [get_env_param TX_JESD_M 16 ] \
|
|
TX_JESD_L [get_env_param TX_JESD_L 4 ] \
|
|
TX_JESD_S [get_env_param TX_JESD_S 1 ] \
|
|
TX_JESD_NP [get_env_param TX_JESD_NP 16 ] \
|
|
TX_NUM_LINKS [get_env_param TX_NUM_LINKS 4 ] \
|
|
RX_KS_PER_CHANNEL [get_env_param RX_KS_PER_CHANNEL 32 ] \
|
|
TX_KS_PER_CHANNEL [get_env_param TX_KS_PER_CHANNEL 16 ] \
|
|
DAC_TPL_XBAR_ENABLE [get_env_param DAC_TPL_XBAR_ENABLE 0 ] \
|
|
]
|
|
|
|
adi_project_files ad_quadmxfe1_ebz_vcu118 [list \
|
|
"system_top.v" \
|
|
"system_constr.xdc" \
|
|
"timing_constr.xdc" \
|
|
"../common/quad_mxfe_gpio_mux.v" \
|
|
"../../../library/common/ad_3w_spi.v" \
|
|
"$ad_hdl_dir/library/common/ad_iobuf.v" \
|
|
"$ad_hdl_dir/projects/common/vcu118/vcu118_system_constr.xdc" ]
|
|
|
|
set_property strategy Performance_RefinePlacement [get_runs impl_1]
|
|
|
|
adi_project_run ad_quadmxfe1_ebz_vcu118
|
|
|