pluto_hdl_adi/library/xilinx/common/ad_lvds_out.v

153 lines
4.0 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms.
// The user should keep this in in mind while exploring these cores.
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
// (at the option of the user):
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module ad_lvds_out #(
parameter DEVICE_TYPE = 0,
parameter SINGLE_ENDED = 0,
parameter IODELAY_ENABLE = 0,
parameter IODELAY_CTRL = 0,
parameter IODELAY_GROUP = "dev_if_delay_group") (
// data interface
input tx_clk,
input tx_data_p,
input tx_data_n,
output tx_data_out_p,
output tx_data_out_n,
// delay-data interface
input up_clk,
input up_dld,
input [ 4:0] up_dwdata,
output [ 4:0] up_drdata,
// delay-cntrl interface
input delay_clk,
input delay_rst,
output delay_locked);
localparam VIRTEX7 = 0;
localparam VIRTEX6 = 1;
localparam ULTRASCALE = 2;
// internal signals
wire tx_data_oddr_s;
wire tx_data_odelay_s;
// delay controller
generate
if ((IODELAY_ENABLE == 1) && (DEVICE_TYPE == VIRTEX7) && (IODELAY_CTRL == 1)) begin
(* IODELAY_GROUP = IODELAY_GROUP *)
IDELAYCTRL i_delay_ctrl (
.RST (delay_rst),
.REFCLK (delay_clk),
.RDY (delay_locked));
end else begin
assign delay_locked = 1'b1;
end
endgenerate
// transmit data interface, oddr -> odelay -> obuf
generate
if (DEVICE_TYPE == ULTRASCALE) begin
ODDRE1 i_tx_data_oddr (
.SR (1'b0),
.C (tx_clk),
.D1 (tx_data_p),
.D2 (tx_data_n),
.Q (tx_data_oddr_s));
end else begin
ODDR #(
.DDR_CLK_EDGE ("SAME_EDGE"),
.INIT (1'b0),
.SRTYPE ("ASYNC"))
i_tx_data_oddr (
.CE (1'b1),
.R (1'b0),
.S (1'b0),
.C (tx_clk),
.D1 (tx_data_p),
.D2 (tx_data_n),
.Q (tx_data_oddr_s));
end
endgenerate
generate
if ((IODELAY_ENABLE == 1) && (DEVICE_TYPE == VIRTEX7)) begin
(* IODELAY_GROUP = IODELAY_GROUP *)
ODELAYE2 #(
.CINVCTRL_SEL ("FALSE"),
.DELAY_SRC ("ODATAIN"),
.HIGH_PERFORMANCE_MODE ("FALSE"),
.ODELAY_TYPE ("VAR_LOAD"),
.ODELAY_VALUE (0),
.REFCLK_FREQUENCY (200.0),
.PIPE_SEL ("FALSE"),
.SIGNAL_PATTERN ("DATA"))
i_tx_data_odelay (
.CE (1'b0),
.CLKIN (1'b0),
.INC (1'b0),
.LDPIPEEN (1'b0),
.CINVCTRL (1'b0),
.REGRST (1'b0),
.C (up_clk),
.ODATAIN (tx_data_oddr_s),
.DATAOUT (tx_data_odelay_s),
.LD (up_dld),
.CNTVALUEIN (up_dwdata),
.CNTVALUEOUT (up_drdata));
end else begin
assign up_drdata = 5'd0;
assign tx_data_odelay_s = tx_data_oddr_s;
end
endgenerate
generate
if (SINGLE_ENDED == 1) begin
assign tx_data_out_n = 1'b0;
OBUF i_tx_data_obuf (
.I (tx_data_odelay_s),
.O (tx_data_out_p));
end else begin
OBUFDS i_tx_data_obuf (
.I (tx_data_odelay_s),
.O (tx_data_out_p),
.OB (tx_data_out_n));
end
endgenerate
endmodule
// ***************************************************************************
// ***************************************************************************