pluto_hdl_adi/library/xilinx/common/ad_cmos_in.v

159 lines
4.1 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms.
// The user should keep this in in mind while exploring these cores.
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
// (at the option of the user):
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module ad_cmos_in #(
parameter DEVICE_TYPE = 0,
parameter IODELAY_CTRL = 0,
parameter IODELAY_GROUP = "dev_if_delay_group") (
// data interface
input rx_clk,
input rx_data_in,
output rx_data_p,
output reg rx_data_n,
// delay-data interface
input up_clk,
input up_dld,
input [ 4:0] up_dwdata,
output [ 4:0] up_drdata,
// delay-cntrl interface
input delay_clk,
input delay_rst,
output delay_locked);
localparam SERIES7 = 0;
localparam VIRTEX6 = 1;
// internal registers
// internal signals
wire rx_data_n_s;
wire rx_data_ibuf_s;
wire rx_data_idelay_s;
// delay controller
generate
if (IODELAY_CTRL == 1) begin
(* IODELAY_GROUP = IODELAY_GROUP *)
IDELAYCTRL i_delay_ctrl (
.RST (delay_rst),
.REFCLK (delay_clk),
.RDY (delay_locked));
end else begin
assign delay_locked = 1'b1;
end
endgenerate
// receive data interface, ibuf -> idelay -> iddr
IBUF i_rx_data_ibuf (
.I (rx_data_in),
.O (rx_data_ibuf_s));
generate
if (DEVICE_TYPE == VIRTEX6) begin
(* IODELAY_GROUP = IODELAY_GROUP *)
IODELAYE1 #(
.CINVCTRL_SEL ("FALSE"),
.DELAY_SRC ("I"),
.HIGH_PERFORMANCE_MODE ("TRUE"),
.IDELAY_TYPE ("VAR_LOADABLE"),
.IDELAY_VALUE (0),
.ODELAY_TYPE ("FIXED"),
.ODELAY_VALUE (0),
.REFCLK_FREQUENCY (200.0),
.SIGNAL_PATTERN ("DATA"))
i_rx_data_idelay (
.T (1'b1),
.CE (1'b0),
.INC (1'b0),
.CLKIN (1'b0),
.DATAIN (1'b0),
.ODATAIN (1'b0),
.CINVCTRL (1'b0),
.C (up_clk),
.IDATAIN (rx_data_ibuf_s),
.DATAOUT (rx_data_idelay_s),
.RST (up_dld),
.CNTVALUEIN (up_dwdata),
.CNTVALUEOUT (up_drdata));
end else begin
(* IODELAY_GROUP = IODELAY_GROUP *)
IDELAYE2 #(
.CINVCTRL_SEL ("FALSE"),
.DELAY_SRC ("IDATAIN"),
.HIGH_PERFORMANCE_MODE ("FALSE"),
.IDELAY_TYPE ("VAR_LOAD"),
.IDELAY_VALUE (0),
.REFCLK_FREQUENCY (200.0),
.PIPE_SEL ("FALSE"),
.SIGNAL_PATTERN ("DATA"))
i_rx_data_idelay (
.CE (1'b0),
.INC (1'b0),
.DATAIN (1'b0),
.LDPIPEEN (1'b0),
.CINVCTRL (1'b0),
.REGRST (1'b0),
.C (up_clk),
.IDATAIN (rx_data_ibuf_s),
.DATAOUT (rx_data_idelay_s),
.LD (up_dld),
.CNTVALUEIN (up_dwdata),
.CNTVALUEOUT (up_drdata));
end
endgenerate
IDDR #(
.DDR_CLK_EDGE ("SAME_EDGE_PIPELINED"),
.INIT_Q1 (1'b0),
.INIT_Q2 (1'b0),
.SRTYPE ("ASYNC"))
i_rx_data_iddr (
.CE (1'b1),
.R (1'b0),
.S (1'b0),
.C (rx_clk),
.D (rx_data_idelay_s),
.Q1 (rx_data_p),
.Q2 (rx_data_n_s));
always @(posedge rx_clk) begin
rx_data_n <= rx_data_n_s;
end
endmodule
// ***************************************************************************
// ***************************************************************************