## Offload attributes set adc_offload_type 1 ; ## PL_DDR set adc_offload_size 1073741824 ; ## 1 Gbyte set dac_offload_type 0 ; ## BRAM set dac_offload_size 512000 ; ## 512 kbyte set plddr_offload_axi_data_width 512 set plddr_offload_axi_addr_width 30 ## NOTE: With this configuration the #36Kb BRAM utilization is at ~51% source $ad_hdl_dir/projects/scripts/adi_pd.tcl source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl source ../common/daq2_bd.tcl ################################################################################ ## DDR3 MIG for Data Offload IP ################################################################################ if {$adc_offload_type} { set offload_name axi_ad9680_offload } if {$dac_offload_type} { set offload_name axi_ad9144_offload } if {$adc_offload_type || $dac_offload_type} { ad_ip_instance proc_sys_reset axi_rstgen ad_ip_instance mig_7series axi_ddr_cntrl file copy -force $ad_hdl_dir/projects/common/zc706/zc706_plddr3_mig.prj [get_property IP_DIR \ [get_ips [get_property CONFIG.Component_Name [get_bd_cells axi_ddr_cntrl]]]] ad_ip_parameter axi_ddr_cntrl CONFIG.XML_INPUT_FILE zc706_plddr3_mig.prj # PL-DDR data offload interfaces create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:diff_clock_rtl:1.0 sys_clk create_bd_port -dir I -type rst sys_rst set_property CONFIG.POLARITY ACTIVE_HIGH [get_bd_ports sys_rst] create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 ddr3 ad_connect axi_ddr_cntrl/ui_clk axi_rstgen/slowest_sync_clk ad_connect axi_ddr_cntrl/ui_clk $offload_name/fifo2axi_bridge/axi_clk ad_connect axi_ddr_cntrl/S_AXI $offload_name/fifo2axi_bridge/ddr_axi ad_connect axi_rstgen/peripheral_aresetn $offload_name/fifo2axi_bridge/axi_resetn ad_connect axi_rstgen/peripheral_aresetn axi_ddr_cntrl/aresetn ad_connect sys_cpu_resetn axi_rstgen/ext_reset_in assign_bd_address [get_bd_addr_segs -of_objects [get_bd_cells axi_ddr_cntrl]] ad_connect sys_rst axi_ddr_cntrl/sys_rst ad_connect sys_clk axi_ddr_cntrl/SYS_CLK ad_connect ddr3 axi_ddr_cntrl/DDR3 ad_connect axi_ddr_cntrl/device_temp_i GND ad_connect $offload_name/i_data_offload/ddr_calib_done axi_ddr_cntrl/init_calib_complete } ################################################################################ # System ID ################################################################################ ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9 ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt" ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9 set sys_cstring "ADC_OFFLOAD_TYPE=$adc_offload_type\nDAC_OFFLOAD_TYPE=$dac_offload_type" sysid_gen_sys_init_file $sys_cstring