// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms. 
// The user should keep this in in mind while exploring these cores. 
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
//  (at the option of the user):
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
//   2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************

module dmac_request_generator (
  input req_aclk,
  input req_aresetn,

  output [ID_WIDTH-1:0] request_id,
  input [ID_WIDTH-1:0] response_id,

  input req_valid,
  output reg req_ready,
  input [BURSTS_PER_TRANSFER_WIDTH-1:0] req_burst_count,

  input enable,
  input pause,

  output eot
);

parameter ID_WIDTH = 3;
parameter BURSTS_PER_TRANSFER_WIDTH = 17;

`include "inc_id.h"

/*
 * Here we only need to count the number of bursts, which means we can ignore
 * the lower bits of the byte count. The last last burst may not contain the
 * maximum number of bytes, but the address_generator and data_mover will take
 * care that only the requested ammount of bytes is transfered.
 */

reg [BURSTS_PER_TRANSFER_WIDTH-1:0] burst_count = 'h00;
reg [ID_WIDTH-1:0] id;
wire [ID_WIDTH-1:0] id_next = inc_id(id);

assign eot = burst_count == 'h00;
assign request_id = id;

always @(posedge req_aclk)
begin
  if (req_aresetn == 1'b0) begin
    burst_count <= 'h00;
    id <= 'h0;
    req_ready <= 1'b1;
  end else if (enable == 1'b0) begin
    req_ready <= 1'b1;
  end else begin
    if (req_ready) begin
      if (req_valid && enable) begin
        burst_count <= req_burst_count;
        req_ready <= 1'b0;
      end
    end else if (response_id != id_next && ~pause) begin
      if (eot)
        req_ready <= 1'b1;
      burst_count <= burst_count - 1'b1;
      id <= id_next;
    end
  end
end

endmodule