// *************************************************************************** // *************************************************************************** // Copyright 2014(c) Analog Devices, Inc. // // All rights reserved. // // Redistribution and use in source and binary forms, with or without modification, // are permitted provided that the following conditions are met: // - Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // - Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in // the documentation and/or other materials provided with the // distribution. // - Neither the name of Analog Devices, Inc. nor the names of its // contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // - The use of this software may or may not infringe the patent rights // of one or more patent holders. This license does not release you // from the requirement that you obtain separate licenses from these // patent holders to use this software. // - Use of the software either in source or binary form, must be run // on or directly connected to an Analog Devices Inc. component. // // THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, // INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A // PARTICULAR PURPOSE ARE DISCLAIMED. // // IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, // EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY // RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR // BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, // STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF // THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // *************************************************************************** // *************************************************************************** `timescale 1ns/100ps module ad_cmos_out ( // data interface tx_clk, tx_data_p, tx_data_n, tx_data_out, // delay-data interface up_clk, up_dld, up_dwdata, up_drdata, // delay-cntrl interface delay_clk, delay_rst, delay_locked); // parameters parameter DEVICE_TYPE = 0; parameter SINGLE_ENDED = 0; parameter IODELAY_ENABLE = 0; parameter IODELAY_CTRL = 0; parameter IODELAY_GROUP = "dev_if_delay_group"; localparam SERIES7 = 0; localparam VIRTEX6 = 1; // data interface input tx_clk; input tx_data_p; input tx_data_n; output tx_data_out; // delay-data interface input up_clk; input up_dld; input [ 4:0] up_dwdata; output [ 4:0] up_drdata; // delay-cntrl interface input delay_clk; input delay_rst; output delay_locked; // internal signals wire tx_data_oddr_s; wire tx_data_odelay_s; // delay controller generate if ((IODELAY_ENABLE == 1) && (DEVICE_TYPE == SERIES7) && (IODELAY_CTRL == 1)) begin (* IODELAY_GROUP = IODELAY_GROUP *) IDELAYCTRL i_delay_ctrl ( .RST (delay_rst), .REFCLK (delay_clk), .RDY (delay_locked)); end else begin assign delay_locked = 1'b1; end endgenerate // transmit data interface, oddr -> odelay -> obuf ODDR #( .DDR_CLK_EDGE ("SAME_EDGE"), .INIT (1'b0), .SRTYPE ("ASYNC")) i_tx_data_oddr ( .CE (1'b1), .R (1'b0), .S (1'b0), .C (tx_clk), .D1 (tx_data_p), .D2 (tx_data_n), .Q (tx_data_oddr_s)); generate if ((IODELAY_ENABLE == 1) && (DEVICE_TYPE == SERIES7)) begin (* IODELAY_GROUP = IODELAY_GROUP *) ODELAYE2 #( .CINVCTRL_SEL ("FALSE"), .DELAY_SRC ("ODATAIN"), .HIGH_PERFORMANCE_MODE ("FALSE"), .ODELAY_TYPE ("VAR_LOAD"), .ODELAY_VALUE (0), .REFCLK_FREQUENCY (200.0), .PIPE_SEL ("FALSE"), .SIGNAL_PATTERN ("DATA")) i_tx_data_odelay ( .CE (1'b0), .CLKIN (1'b0), .INC (1'b0), .LDPIPEEN (1'b0), .CINVCTRL (1'b0), .REGRST (1'b0), .C (up_clk), .ODATAIN (tx_data_oddr_s), .DATAOUT (tx_data_odelay_s), .LD (up_dld), .CNTVALUEIN (up_dwdata), .CNTVALUEOUT (up_drdata)); end else begin assign up_drdata = 5'd0; assign tx_data_odelay_s = tx_data_oddr_s; end endgenerate OBUF i_tx_data_obuf ( .I (tx_data_odelay_s), .O (tx_data_out)); endmodule // *************************************************************************** // ***************************************************************************