-- *************************************************************************** -- *************************************************************************** -- Copyright 2013(c) Analog Devices, Inc. -- Author: Lars-Peter Clausen -- -- All rights reserved. -- -- Redistribution and use in source and binary forms, with or without modification, -- are permitted provided that the following conditions are met: -- - Redistributions of source code must retain the above copyright -- notice, this list of conditions and the following disclaimer. -- - Redistributions in binary form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in -- the documentation and/or other materials provided with the -- distribution. -- - Neither the name of Analog Devices, Inc. nor the names of its -- contributors may be used to endorse or promote products derived -- from this software without specific prior written permission. -- - The use of this software may or may not infringe the patent rights -- of one or more patent holders. This license does not release you -- from the requirement that you obtain separate licenses from these -- patent holders to use this software. -- - Use of the software either in source or binary form, must be run -- on or directly connected to an Analog Devices Inc. component. -- -- THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, -- INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A -- PARTICULAR PURPOSE ARE DISCLAIMED. -- -- IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY -- RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF -- THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -- *************************************************************************** -- *************************************************************************** library ieee; use ieee.std_logic_1164.all; library work; use work.fifo_synchronizer; use work.i2s_clkgen; use work.i2s_tx; use work.i2s_rx; entity i2s_controller is generic( C_SLOT_WIDTH : integer := 24; -- Width of one Slot C_BCLK_POL : integer := 0; -- BCLK Polarity (0 - Falling edge, 1 - Rising edge) C_LRCLK_POL : integer := 0; -- LRCLK Polarity (0 - Falling edge, 1 - Rising edge) C_NUM_CH : integer := 1; C_HAS_TX : integer := 1; C_HAS_RX : integer := 1 ); port( clk : in std_logic; -- System clock resetn : in std_logic; -- System reset data_clk : in std_logic; -- Data clock should be less than clk / 4 bclk_o : out std_logic_vector(C_NUM_CH - 1 downto 0); -- Bit Clock lrclk_o : out std_logic_vector(C_NUM_CH - 1 downto 0); -- Frame Clock sdata_o : out std_logic_vector(C_NUM_CH - 1 downto 0); -- Serial Data Output sdata_i : in std_logic_vector(C_NUM_CH - 1 downto 0); -- Serial Data Input tx_enable : in Boolean; -- Enable TX tx_ack : out std_logic; -- Request new Slot Data tx_stb : in std_logic; -- Request new Slot Data tx_data : in std_logic_vector(C_SLOT_WIDTH-1 downto 0); -- Slot Data in rx_enable : in Boolean; -- Enable RX rx_ack : in std_logic; rx_stb : out std_logic; -- Valid Slot Data rx_data : out std_logic_vector(C_SLOT_WIDTH-1 downto 0); -- Slot Data out -- Runtime parameter bclk_div_rate : in natural range 0 to 255; lrclk_div_rate : in natural range 0 to 255 ); end i2s_controller; architecture Behavioral of i2s_controller is constant NUM_TX : integer := C_HAS_TX * C_NUM_CH; constant NUM_RX : integer := C_HAS_RX * C_NUM_CH; signal enable : Boolean; signal cdc_sync_stage0_tick : std_logic; signal cdc_sync_stage1_tick : std_logic; signal cdc_sync_stage2_tick : std_logic; signal cdc_sync_stage3_tick : std_logic; signal BCLK_O_int : std_logic; signal LRCLK_O_int : std_logic; signal tx_bclk : std_logic; signal tx_lrclk : std_logic; signal tx_sdata : std_logic_vector(C_NUM_CH - 1 downto 0); signal tx_tick : std_logic; signal tx_channel_sync : std_logic; signal tx_frame_sync : std_logic; signal const_1 : std_logic; signal bclk_tick : std_logic; signal rx_bclk : std_logic; signal rx_lrclk : std_logic; signal rx_sdata : std_logic_vector(NUM_RX - 1 downto 0); signal rx_channel_sync : std_logic; signal rx_frame_sync : std_logic; signal tx_sync_fifo_out : std_logic_vector(3 + NUM_TX downto 0); signal tx_sync_fifo_in : std_logic_vector(3 + NUM_TX downto 0); signal rx_sync_fifo_out : std_logic_vector(3 + NUM_RX downto 0); signal rx_sync_fifo_in : std_logic_vector(3 + NUM_RX downto 0); signal data_resetn : std_logic; signal data_reset_vec : std_logic_vector(2 downto 0); begin enable <= rx_enable or tx_enable; const_1 <= '1'; process (data_clk, resetn) begin if resetn = '0' then data_reset_vec <= (others => '1'); elsif rising_edge(data_clk) then data_reset_vec(2 downto 1) <= data_reset_vec(1 downto 0); data_reset_vec(0) <= '0'; end if; end process; data_resetn <= not data_reset_vec(2); -- Generate tick signal in the DATA_CLK_I domain process (data_clk) begin if rising_edge(data_clk) then cdc_sync_stage0_tick <= not cdc_sync_stage0_tick; end if; end process; process (clk) begin if rising_edge(clk) then cdc_sync_stage1_tick <= cdc_sync_stage0_tick; cdc_sync_stage2_tick <= cdc_sync_stage1_tick; cdc_sync_stage3_tick <= cdc_sync_stage2_tick; end if; end process; tx_tick <= cdc_sync_stage2_tick xor cdc_sync_stage3_tick; tx_sync_fifo_in(0) <= tx_channel_sync; tx_sync_fifo_in(1) <= tx_frame_sync; tx_sync_fifo_in(2) <= tx_bclk; tx_sync_fifo_in(3) <= tx_lrclk; tx_sync_fifo_in(3 + NUM_TX downto 4) <= tx_sdata; process (data_clk) begin if rising_edge(data_clk) then if data_resetn = '0' then bclk_o <= (others => '1'); lrclk_o <= (others => '1'); sdata_o <= (others => '0'); else if C_BCLK_POL = 0 then bclk_o <= (others => tx_sync_fifo_out(2)); else bclk_o <= (others => not tx_sync_fifo_out(2)); end if; if C_LRCLK_POL = 0 then lrclk_o <= (others => tx_sync_fifo_out(3)); else lrclk_o <= (others => not tx_sync_fifo_out(3)); end if; if C_HAS_TX = 1 then sdata_o <= tx_sync_fifo_out(3 + NUM_TX downto 4); end if; if C_HAS_RX = 1 then rx_sync_fifo_in(3 downto 0) <= tx_sync_fifo_out(3 downto 0); rx_sync_fifo_in(3 + NUM_RX downto 4) <= sdata_i; end if; end if; end if; end process; tx_sync: entity fifo_synchronizer generic map ( DEPTH => 4, WIDTH => NUM_TX + 4 ) port map ( in_resetn => resetn, in_clk => clk, in_data => tx_sync_fifo_in, in_tick => tx_tick, out_resetn => data_resetn, out_clk => data_clk, out_data => tx_sync_fifo_out ); clkgen: entity i2s_clkgen port map( clk => clk, resetn => resetn, enable => enable, tick => tx_tick, bclk_div_rate => bclk_div_rate, lrclk_div_rate => lrclk_div_rate, channel_sync => tx_channel_sync, frame_sync => tx_frame_sync, bclk => tx_bclk, lrclk => tx_lrclk ); tx_gen: if C_HAS_TX = 1 generate tx: entity i2s_tx generic map ( C_SLOT_WIDTH => C_SLOT_WIDTH, C_NUM => NUM_TX ) port map ( clk => clk, resetn => resetn, enable => tx_enable, channel_sync => tx_channel_sync, frame_sync => tx_frame_sync, bclk => tx_bclk, sdata => tx_sdata, ack => tx_ack, stb => tx_stb, data => tx_data ); end generate; rx_gen: if C_HAS_RX = 1 generate rx: entity i2s_rx generic map ( C_SLOT_WIDTH => C_SLOT_WIDTH, C_NUM => NUM_RX ) port map ( clk => clk, resetn => resetn, enable => rx_enable, channel_sync => rx_channel_sync, frame_sync => rx_frame_sync, bclk => rx_bclk, sdata => rx_sdata, ack => rx_ack, stb => rx_stb, data => rx_data ); rx_channel_sync <= rx_sync_fifo_out(0); rx_frame_sync <= rx_sync_fifo_out(1); rx_bclk <= rx_sync_fifo_out(2); rx_lrclk <= rx_sync_fifo_out(3); rx_sdata <= rx_sync_fifo_out(3 + NUM_RX downto 4); rx_sync: entity fifo_synchronizer generic map ( DEPTH => 4, WIDTH => NUM_RX + 4 ) port map ( in_resetn => data_resetn, in_clk => data_clk, in_data => rx_sync_fifo_in, in_tick => const_1, out_resetn => resetn, out_clk => clk, out_data => rx_sync_fifo_out ); end generate; end Behavioral;