// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module system_top (

  ddr_addr,
  ddr_ba,
  ddr_cas_n,
  ddr_ck_n,
  ddr_ck_p,
  ddr_cke,
  ddr_cs_n,
  ddr_dm,
  ddr_dq,
  ddr_dqs_n,
  ddr_dqs_p,
  ddr_odt,
  ddr_ras_n,
  ddr_reset_n,
  ddr_we_n,

  eth1_mdc,
  eth1_mdio,
  eth1_rgmii_rxclk,
  eth1_rgmii_rxctl,
  eth1_rgmii_rxdata,
  eth1_rgmii_txclk,
  eth1_rgmii_txctl,
  eth1_rgmii_txdata,
  eth1_resetn,

  fixed_io_ddr_vrn,
  fixed_io_ddr_vrp,
  fixed_io_mio,
  fixed_io_ps_clk,
  fixed_io_ps_porb,
  fixed_io_ps_srstb,

  uart0_rxd,
  uart0_txd,

  hdmi_out_clk,
  hdmi_vsync,
  hdmi_hsync,
  hdmi_data_e,
  hdmi_data,
  hdmi_pd,
  hdmi_intn,

  spdif,
  spdif_in,

  i2s_mclk,
  i2s_bclk,
  i2s_lrclk,
  i2s_sdata_out,
  i2s_sdata_in,

  iic_scl,
  iic_sda,

  gpio_bd,

  rx_clk_in_p,
  rx_clk_in_n,
  rx_frame_in_p,
  rx_frame_in_n,
  rx_data_in_p,
  rx_data_in_n,
  tx_clk_out_p,
  tx_clk_out_n,
  tx_frame_out_p,
  tx_frame_out_n,
  tx_data_out_p,
  tx_data_out_n,

  gpio_rfpwr_enable,
  gpio_clksel,
  gpio_txnrx,
  gpio_enable,
  gpio_resetb,
  gpio_sync,
  gpio_en_agc,
  gpio_ctl,
  gpio_status,

  spi_csn,
  spi_clk,
  spi_mosi,
  spi_miso);


  inout   [14:0]  ddr_addr;
  inout   [ 2:0]  ddr_ba;
  inout           ddr_cas_n;
  inout           ddr_ck_n;
  inout           ddr_ck_p;
  inout           ddr_cke;
  inout           ddr_cs_n;
  inout   [ 3:0]  ddr_dm;
  inout   [31:0]  ddr_dq;
  inout   [ 3:0]  ddr_dqs_n;
  inout   [ 3:0]  ddr_dqs_p;
  inout           ddr_odt;
  inout           ddr_ras_n;
  inout           ddr_reset_n;
  inout           ddr_we_n;

  output          eth1_mdc;
  inout           eth1_mdio;
  input           eth1_rgmii_rxclk;
  input           eth1_rgmii_rxctl;
  input   [ 3:0]  eth1_rgmii_rxdata;
  output          eth1_rgmii_txclk;
  output          eth1_rgmii_txctl;
  output  [ 3:0]  eth1_rgmii_txdata;
  output          eth1_resetn;

  inout           fixed_io_ddr_vrn;
  inout           fixed_io_ddr_vrp;
  inout   [53:0]  fixed_io_mio;
  inout           fixed_io_ps_clk;
  inout           fixed_io_ps_porb;
  inout           fixed_io_ps_srstb;

  input           uart0_rxd;
  output          uart0_txd;

  output          hdmi_out_clk;
  output          hdmi_vsync;
  output          hdmi_hsync;
  output          hdmi_data_e;
  output  [15:0]  hdmi_data;
  output          hdmi_pd;
  input           hdmi_intn;

  output          spdif;
  input           spdif_in;

  output          i2s_mclk;
  output          i2s_bclk;
  output          i2s_lrclk;
  output          i2s_sdata_out;
  input           i2s_sdata_in;

  inout           iic_scl;
  inout           iic_sda;

  inout   [11:0]  gpio_bd;

  input           rx_clk_in_p;
  input           rx_clk_in_n;
  input           rx_frame_in_p;
  input           rx_frame_in_n;
  input   [ 5:0]  rx_data_in_p;
  input   [ 5:0]  rx_data_in_n;
  output          tx_clk_out_p;
  output          tx_clk_out_n;
  output          tx_frame_out_p;
  output          tx_frame_out_n;
  output  [ 5:0]  tx_data_out_p;
  output  [ 5:0]  tx_data_out_n;

  inout           gpio_rfpwr_enable;
  inout           gpio_clksel;
  inout           gpio_txnrx;
  inout           gpio_enable;
  inout           gpio_resetb;
  inout           gpio_sync;
  inout           gpio_en_agc;
  inout   [ 3:0]  gpio_ctl;
  inout   [ 7:0]  gpio_status;

  output          spi_csn;
  output          spi_clk;
  output          spi_mosi;
  input           spi_miso;


  // internal signals

  wire    [63:0]  gpio_i;
  wire    [63:0]  gpio_o;
  wire    [63:0]  gpio_t;
  wire    [15:0]  ps_intrs;

  // assignments

  assign eth1_resetn = 1'b1;
  assign hdmi_pd = 1'b0;

  // instantiations

  ad_iobuf #(.DATA_WIDTH(19)) i_iobuf (
    .dt (gpio_t[50:32]),
    .di (gpio_o[50:32]),
    .do (gpio_i[50:32]),
    .dio({  gpio_rfpwr_enable,
            gpio_clksel,
            gpio_txnrx,
            gpio_enable,
            gpio_resetb,
            gpio_sync,
            gpio_en_agc,
            gpio_ctl,
            gpio_status}));

  ad_iobuf #(.DATA_WIDTH(12)) i_iobuf_bd (
    .dt (gpio_t[11:0]),
    .di (gpio_o[11:0]),
    .do (gpio_i[11:0]),
    .dio (gpio_bd));

  system_wrapper i_system_wrapper (
    .ad9361_adc_dma_irq (ps_intrs[13]),
    .ad9361_dac_dma_irq (ps_intrs[12]),
    .ddr_addr (ddr_addr),
    .ddr_ba (ddr_ba),
    .ddr_cas_n (ddr_cas_n),
    .ddr_ck_n (ddr_ck_n),
    .ddr_ck_p (ddr_ck_p),
    .ddr_cke (ddr_cke),
    .ddr_cs_n (ddr_cs_n),
    .ddr_dm (ddr_dm),
    .ddr_dq (ddr_dq),
    .ddr_dqs_n (ddr_dqs_n),
    .ddr_dqs_p (ddr_dqs_p),
    .ddr_odt (ddr_odt),
    .ddr_ras_n (ddr_ras_n),
    .ddr_reset_n (ddr_reset_n),
    .ddr_we_n (ddr_we_n),
    .eth1_125mclk (),
    .eth1_25mclk (),
    .eth1_2m5clk (),
    .eth1_clock_speed (),
    .eth1_duplex_status (),
    .eth1_intn (1'b1),
    .eth1_link_status (),
    .eth1_mdio_mdc (eth1_mdc),
    .eth1_mdio_mdio_io (eth1_mdio),
    .eth1_refclk (),
    .eth1_rgmii_rd (eth1_rgmii_rxdata),
    .eth1_rgmii_rx_ctl (eth1_rgmii_rxctl),
    .eth1_rgmii_rxc (eth1_rgmii_rxclk),
    .eth1_rgmii_td (eth1_rgmii_txdata),
    .eth1_rgmii_tx_ctl (eth1_rgmii_txctl),
    .eth1_rgmii_txc (eth1_rgmii_txclk),
    .eth1_speed_mode (),
    .fixed_io_ddr_vrn (fixed_io_ddr_vrn),
    .fixed_io_ddr_vrp (fixed_io_ddr_vrp),
    .fixed_io_mio (fixed_io_mio),
    .fixed_io_ps_clk (fixed_io_ps_clk),
    .fixed_io_ps_porb (fixed_io_ps_porb),
    .fixed_io_ps_srstb (fixed_io_ps_srstb),
    .gpio_i (gpio_i),
    .gpio_o (gpio_o),
    .gpio_t (gpio_t),
    .hdmi_data (hdmi_data),
    .hdmi_data_e (hdmi_data_e),
    .hdmi_hsync (hdmi_hsync),
    .hdmi_out_clk (hdmi_out_clk),
    .hdmi_vsync (hdmi_vsync),
    .i2s_bclk (i2s_bclk),
    .i2s_lrclk (i2s_lrclk),
    .i2s_mclk (i2s_mclk),
    .i2s_sdata_in (i2s_sdata_in),
    .i2s_sdata_out (i2s_sdata_out),
    .iic_main_scl_io (iic_scl),
    .iic_main_sda_io (iic_sda),
    .otg_vbusoc (1'b0),
    .ps_intr_00 (ps_intrs[0]),
    .ps_intr_01 (ps_intrs[1]),
    .ps_intr_02 (ps_intrs[2]),
    .ps_intr_03 (ps_intrs[3]),
    .ps_intr_04 (ps_intrs[4]),
    .ps_intr_05 (ps_intrs[5]),
    .ps_intr_06 (ps_intrs[6]),
    .ps_intr_07 (ps_intrs[7]),
    .ps_intr_08 (ps_intrs[8]),
    .ps_intr_09 (ps_intrs[9]),
    .ps_intr_10 (ps_intrs[10]),
    .ps_intr_11 (ps_intrs[11]),
    .ps_intr_12 (ps_intrs[12]),
    .ps_intr_13 (ps_intrs[13]),
    .rx_clk_in_n (rx_clk_in_n),
    .rx_clk_in_p (rx_clk_in_p),
    .rx_data_in_n (rx_data_in_n),
    .rx_data_in_p (rx_data_in_p),
    .rx_frame_in_n (rx_frame_in_n),
    .rx_frame_in_p (rx_frame_in_p),
    .spdif (spdif),
    .spi0_clk_i (1'b0),
    .spi0_clk_o (spi_clk),
    .spi0_csn_0_o (spi_csn),
    .spi0_csn_1_o (),
    .spi0_csn_2_o (),
    .spi0_csn_i (1'b1),
    .spi0_sdi_i (spi_miso),
    .spi0_sdo_i (1'b0),
    .spi0_sdo_o (spi_mosi),
    .spi1_clk_i (1'b0),
    .spi1_clk_o (),
    .spi1_csn_0_o (),
    .spi1_csn_1_o (),
    .spi1_csn_2_o (),
    .spi1_csn_i (1'b1),
    .spi1_sdi_i (1'b0),
    .spi1_sdo_i (1'b0),
    .spi1_sdo_o (),
    .tx_clk_out_n (tx_clk_out_n),
    .tx_clk_out_p (tx_clk_out_p),
    .tx_data_out_n (tx_data_out_n),
    .tx_data_out_p (tx_data_out_p),
    .tx_frame_out_n (tx_frame_out_n),
    .tx_frame_out_p (tx_frame_out_p),
    .uart_0_rxd (uart0_rxd),
    .uart_0_txd (uart0_txd));

endmodule

// ***************************************************************************
// ***************************************************************************