// ***************************************************************************
// ***************************************************************************
// Copyright 2014(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module ad_cmos_out #(

  parameter   DEVICE_TYPE = 0,
  parameter   IODELAY_ENABLE = 0,
  parameter   IODELAY_CTRL = 0,
  parameter   IODELAY_GROUP = "dev_if_delay_group") (

  // data interface

  input                   tx_clk,
  input                   tx_data_p,
  input                   tx_data_n,
  output                  tx_data_out,

  // delay-data interface

  input                   up_clk,
  input                   up_dld,
  input       [ 4:0]      up_dwdata,
  output      [ 4:0]      up_drdata,

  // delay-cntrl interface

  input                   delay_clk,
  input                   delay_rst,
  output                  delay_locked);

  localparam  SERIES7 = 0;
  localparam  VIRTEX6 = 1;

  // internal signals

  wire                tx_data_oddr_s;
  wire                tx_data_odelay_s;

  // delay controller

  generate
  if ((IODELAY_ENABLE == 1) && (DEVICE_TYPE == SERIES7) && (IODELAY_CTRL == 1)) begin
  (* IODELAY_GROUP = IODELAY_GROUP *)
  IDELAYCTRL i_delay_ctrl (
    .RST (delay_rst),
    .REFCLK (delay_clk),
    .RDY (delay_locked));
  end else begin
  assign delay_locked = 1'b1;
  end
  endgenerate

  // transmit data interface, oddr -> odelay -> obuf

  ODDR #(
    .DDR_CLK_EDGE ("SAME_EDGE"),
    .INIT (1'b0),
    .SRTYPE ("ASYNC"))
  i_tx_data_oddr (
    .CE (1'b1),
    .R (1'b0),
    .S (1'b0),
    .C (tx_clk),
    .D1 (tx_data_p),
    .D2 (tx_data_n),
    .Q (tx_data_oddr_s));

  generate
  if ((IODELAY_ENABLE == 1) && (DEVICE_TYPE == SERIES7)) begin
  (* IODELAY_GROUP = IODELAY_GROUP *)
  ODELAYE2 #(
    .CINVCTRL_SEL ("FALSE"),
    .DELAY_SRC ("ODATAIN"),
    .HIGH_PERFORMANCE_MODE ("FALSE"),
    .ODELAY_TYPE ("VAR_LOAD"),
    .ODELAY_VALUE (0),
    .REFCLK_FREQUENCY (200.0),
    .PIPE_SEL ("FALSE"),
    .SIGNAL_PATTERN ("DATA"))
  i_tx_data_odelay (
    .CE (1'b0),
    .CLKIN (1'b0),
    .INC (1'b0),
    .LDPIPEEN (1'b0),
    .CINVCTRL (1'b0),
    .REGRST (1'b0),
    .C (up_clk),
    .ODATAIN (tx_data_oddr_s),
    .DATAOUT (tx_data_odelay_s),
    .LD (up_dld),
    .CNTVALUEIN (up_dwdata),
    .CNTVALUEOUT (up_drdata));
  end else begin
  assign up_drdata = 5'd0;
  assign tx_data_odelay_s = tx_data_oddr_s;
  end
  endgenerate

  OBUF i_tx_data_obuf (
    .I (tx_data_odelay_s),
    .O (tx_data_out));

endmodule

// ***************************************************************************
// ***************************************************************************