source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

# get_env_param retrieves parameter value from the environment if exists,
# other case use the default value
#
#   Use over-writable parameters from the environment.
#
#    e.g.
#      make JESD_MODE=64B66B RX_LANE_RATE=24.75 TX_LANE_RATE=12.375 RX_JESD_L=4 TX_JESD_L=4
#      make JESD_MODE=64B66B RX_LANE_RATE=16.22016 TX_LANE_RATE=16.22016 RX_JESD_M=8 RX_JESD_L=2 TX_JESD_M=16 TX_JESD_L=4
#      make JESD_MODE=8B10B  RX_JESD_L=4 RX_JESD_M=8 TX_JESD_L=4 TX_JESD_M=8

#
# Parameter description:
#   JESD_MODE : Used link layer encoder mode
#      64B66B - 64b66b link layer defined in JESD 204C, uses Xilinx IP as Physical layer
#      8B10B  - 8b10b link layer defined in JESD 204B, uses ADI IP as Physical layer
#
#   RX_LANE_RATE :  Line rate of the Rx link ( MxFE to FPGA )
#   TX_LANE_RATE :  Line rate of the Tx link ( FPGA to MxFE )
#   [RX/TX]_JESD_M : Number of converters per link
#   [RX/TX]_JESD_L : Number of lanes per link
#   [RX/TX]_JESD_S : Number of samples per frame
#   [RX/TX]_JESD_NP : Number of bits per sample, only 16 is supported
#   [RX/TX]_NUM_LINKS : Number of links, matches numer of MxFE devices
#   [RX/TX]_KS_PER_CHANNEL : Number of samples stored in internal buffers in kilosamples per converter (M)
#

adi_project ad9082_fmca_ebz_vcu118 0 [list \
  JESD_MODE    [get_env_param JESD_MODE           8B10B ] \
  RX_LANE_RATE [get_env_param RX_LANE_RATE           15 ] \
  TX_LANE_RATE [get_env_param TX_LANE_RATE           15 ] \
  RX_JESD_M    [get_env_param RX_JESD_M               4 ] \
  RX_JESD_L    [get_env_param RX_JESD_L               8 ] \
  RX_JESD_S    [get_env_param RX_JESD_S               1 ] \
  RX_JESD_NP   [get_env_param RX_JESD_NP             16 ] \
  RX_NUM_LINKS [get_env_param RX_NUM_LINKS            1 ] \
  TX_JESD_M    [get_env_param TX_JESD_M               4 ] \
  TX_JESD_L    [get_env_param TX_JESD_L               8 ] \
  TX_JESD_S    [get_env_param TX_JESD_S               1 ] \
  TX_JESD_NP   [get_env_param TX_JESD_NP             16 ] \
  TX_NUM_LINKS [get_env_param TX_NUM_LINKS            1 ] \
  RX_KS_PER_CHANNEL [get_env_param RX_KS_PER_CHANNEL 64 ] \
  TX_KS_PER_CHANNEL [get_env_param TX_KS_PER_CHANNEL 64 ] \
]

adi_project_files ad9082_fmca_ebz_vcu118 [list \
  "../../ad9081_fmca_ebz/vcu118/system_top.v" \
  "../../ad9081_fmca_ebz/vcu118/system_constr.xdc"\
  "../../ad9081_fmca_ebz/vcu118/timing_constr.xdc"\
  "../../../library/common/ad_3w_spi.v"\
  "$ad_hdl_dir/library/common/ad_iobuf.v" \
  "$ad_hdl_dir/projects/common/vcu118/vcu118_system_constr.xdc" ]

# Avoid critical warning in OOC mode from the clock definitions
# since at that stage the submodules are not stiched together yet
if {$ADI_USE_OOC_SYNTHESIS == 1} {
  set_property used_in_synthesis false [get_files timing_constr.xdc]
}

adi_project_run ad9082_fmca_ebz_vcu118