source ../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

#
# Parameter description:
#   JESD_MODE : Used link layer encoder mode
#      64B66B - 64b66b link layer defined in JESD 204C, uses Xilinx IP as Physical layer
#      8B10B  - 8b10b link layer defined in JESD 204B, uses ADI IP as Physical layer
#
#   RX_RATE :  Line rate of the Rx link ( MxFE to FPGA ) used in 64B66B mode
#   TX_RATE :  Line rate of the Tx link ( FPGA to MxFE ) used in 64B66B mode
#   [RX/TX]_PLL_SEL :  Used PLL in the Xilinx PHY used in 64B66B mode
#                      Encoding is:
#                         0 - CPLL
#                         1 - QPLL0
#                         2 - QPLL1
#   REF_CLK_RATE : Frequency of reference clock in MHz used in 64B66B mode
#   [RX/TX]_JESD_M : Number of converters per link
#   [RX/TX]_JESD_L : Number of lanes per link
#   [RX/TX]_JESD_NP : Number of bits per sample, only 16 is supported
#   [RX/TX]_NUM_LINKS : Number of links, matches numer of MxFE devices
#
#  
#  !!! For this carrier only 8B10B mode is supported !!!
#

adi_project ad9081_fmca_ebz_zcu102 0 [list \
  JESD_MODE    8B10B \
  RX_JESD_M    8  \
  RX_JESD_L    4  \
  RX_JESD_S    1  \
  RX_JESD_NP   16 \
  RX_NUM_LINKS 1  \
  TX_JESD_M    8  \
  TX_JESD_L    4  \
  TX_JESD_S    1  \
  TX_JESD_NP   16 \
  TX_NUM_LINKS 1  \
]

adi_project_files ad9081_fmca_ebz_zcu102 [list \
  "system_top.v" \
  "system_constr.xdc"\
  "timing_constr.xdc"\
  "../../../library/common/ad_3w_spi.v"\
  "$ad_hdl_dir/library/xilinx/common/ad_iobuf.v" \
  "$ad_hdl_dir/projects/common/zcu102/zcu102_system_constr.xdc" ]


adi_project_run ad9081_fmca_ebz_zcu102