fb585e9219
daq2/kcu105- intc configurations
2016-12-05 12:02:32 -05:00
8651b7d1e9
fmcjesdadc1/a5soc- 15.1 updates
2016-12-02 13:41:14 -05:00
08b84dc475
adv7511_kc705- enable interconnect pipelines on hdmi dma
2016-12-02 13:40:13 -05:00
1e7ab4d708
kcu105- axi-interconnect register slices
2016-12-02 11:54:04 -05:00
108870a2dc
kcu105: Don't use phy reset automation, as it's not supported for KCU105
2016-08-08 17:53:32 +03:00
17722e9dfa
daq2/common: Add util_dacfifo/dac_xfer_out control
2016-07-28 15:43:35 +03:00
66c02a10de
util_dacfifo: Add dac_xfer_out control
...
The dac_xfer_out control signal is asserted while the DAC reads back data. Should be connected to upack/dma_xfer_in.
2016-07-28 15:43:35 +03:00
c2ee311ad4
util_dacfifo: Add a bypass option to the FIFO
2016-07-28 15:43:35 +03:00
b611240d46
kcu105: Update base project to 2015.4.2
...
- change part to revision 1.1 of the board
2016-07-22 17:50:18 +03:00
b2203cacce
adi_project.pl: Fix ADI_NO_BITSTREAM_COMPRESSION detection logic
...
Only enable bitstream compression only if both the
ADI_NO_BITSTREAM_COMPRESSION environment and TCL variable are not set.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-07-14 11:33:56 +02:00
fe08222bdf
Enable bitstream compression for Xilinx projects
...
Enabling bitstream compression reduces the size of the generated bitstream.
This means on one hand it will consume less storage, which is especially
useful for the BOOT partition of the ADI images where we store BOOT.BIN
files for all supported platforms.
On the other hand a smaller bitstream is faster to load from the storage
medium and it is also faster to program to the FPGA. So it reduces the
overall boot time as well.
The only downside of bitstream compression is that the bitstream size is no
longer constant, but depends on the actual design and resource utilization.
This will not work with bootloaders that expect a fixed size.
When building a bitstream using the tcl scripts bitstream compression can
be disabled by setting the ADI_NO_BITSTREAM_COMPRESSION environment
variable.
Initial tests show a reduction of a round 50% in size for most ADI
projects.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-07-14 11:40:04 +03:00
130bfdd408
motcon2_fmc: Update to revision C
2016-06-13 15:42:25 +03:00
df04eae2a7
motcon2_fmc: Sync transfer start for the current monitor DMAs, because there are 3 channels active usually
2016-06-13 15:41:02 +03:00
334aaeb59a
daq3: Added a10gx project
2016-06-08 14:13:53 +03:00
90aa27c3b0
daq3: Make daq3_spi module more generic
2016-06-08 14:11:34 +03:00
136a86adae
a10gx/base: set gpio to 32
2016-05-18 15:26:12 +03:00
93b338eea4
a10gx/base: separate gpio in/out
2016-05-18 15:26:03 +03:00
a51dd941a9
a10gx: Updated base design to include MMU
2016-05-18 11:44:43 +03:00
33ceb5e673
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-05-17 22:56:04 +03:00
35a98550d9
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-05-17 17:16:33 +03:00
00d9d4484e
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-05-17 17:16:25 +03:00
c7d3560cb7
arradio: Connect I2C peripheral to the arradio board. Used HPS I2C
2016-05-11 14:20:21 +03:00
c291f8f107
daq1: Updated design to 2015.4
2016-04-14 23:36:47 +03:00
469b4ea5e8
fmcadc5: Updated design to 2015.4
2016-04-14 23:18:23 +03:00
62bd057106
fmcadc5/common: Update common design to 2015.4
2016-04-14 23:01:38 +03:00
21208ca208
Makefiles: Update Makefiles
2016-03-31 12:37:47 +03:00
657144d9a7
a10gx: Updated base design and DAQ2 to the new revision of the a10gx board
...
- tried using ATX PLL and fPLL for TX transceiver clocks, but could not get them to lock
- CMU PLL works correctly as temporary solution
2016-03-28 13:21:36 +03:00
7c2f34549b
motcon2_fmc: Update common design to 2015.4
2016-03-23 10:27:07 +02:00
714caa964c
usdrx1: Update common design to 2015.4
2016-03-18 16:29:43 +02:00
05f4f3ac09
usb_fx3: Update common design to 2015.4
2016-03-18 16:16:38 +02:00
24fdd2b9b7
pzsdr/ccpci: Update common design to 2015.4
2016-03-18 15:30:10 +02:00
f8b155faab
pzsdr/ccfmc: Update common design to 2015.4
2016-03-18 15:28:56 +02:00
d567af54ef
imageon: Update common design to 2015.4
2016-03-18 15:27:31 +02:00
995debedce
fmcomms2: Update common design to 2015.4
2016-03-18 15:26:52 +02:00
b555be25d5
kcu105: Update common design to 2015.4
2016-03-18 15:22:42 +02:00
412013d939
adv7511: Update common design to 2015.4
2016-03-18 15:01:25 +02:00
d355aa0ea6
daq3/zc706: Updated design to 2015.4
2016-03-17 11:46:48 +02:00
012b095006
daq3: Updated common design to 2015.4
2016-03-17 11:44:27 +02:00
38c3f7474a
ad6676: Updated common design to 2015.4
2016-03-17 11:40:46 +02:00
abc03fff2c
fmcomms7: Updated design to 2015.4
2016-03-17 09:11:41 +02:00
59c726ecbe
fmcjesdadc1: Updated common design to 2015.4
2016-03-16 10:14:06 +02:00
1a3aab0c13
fmcomms1: Updated common design to 2015.4
2016-03-16 10:09:54 +02:00
b7be089b82
daq2: Updated common design to 2015.4
2016-03-16 10:02:42 +02:00
334fce03a3
fmcadc4/zc706: Updated design to 2015.4
2016-03-15 15:28:11 +02:00
e8dd5f9788
fmcadc4: Updated common design to 2015.4
2016-03-15 15:27:25 +02:00
98cc7dad7d
fmcadc2: Updated common design to 2015.4
2016-03-15 15:26:05 +02:00
ceea7f25b2
fmcomms2: Updated common design to 2015.4
2016-03-15 15:23:20 +02:00
6f03998b95
zc702: Updated common design to 2015.4
2016-03-15 15:21:22 +02:00
a0c5f46940
zed: Updated common design to 2015.4
2016-03-15 15:20:46 +02:00
9a258d5e4c
vc707: Updated common design to 2015.4
2016-03-15 15:20:02 +02:00
Rejeesh Kutty
Adrian Costina
Istvan Csomortani
Lars-Peter Clausen
AndreiGrozav