4bb8712e71
imageon: updates
2015-03-24 15:08:48 -04:00
b774379796
fmcomms2_zc706: Clean up system top
2015-03-24 13:38:48 +02:00
fcbbfa0177
fmcomms2_pr ZC706: Update project to the new framework
2015-03-24 13:37:37 +02:00
75d2c7e93e
daq1_zc706: Update project to the new framework
2015-03-24 12:45:24 +02:00
d418c9f9b1
fmcjesdadc1: Updated project to new flow. Updated ZC706 design
2015-03-24 10:38:14 +02:00
58a5e0142c
ad9265_fmc: Updated project to the new flow
2015-03-24 10:37:06 +02:00
919c02b57a
cftl_std: Update project to the new framework
2015-03-23 16:03:15 +02:00
d93b967980
fmcadc5: 2014.4 updates
2015-03-23 10:00:46 -04:00
624d2778d8
fmcadc5: 2014.4 updates
2015-03-23 10:00:46 -04:00
6dca97dd20
fmcadc5: 2014.4 updates
2015-03-23 10:00:46 -04:00
a09075030c
fmcadc5: 2014.4 updates
2015-03-23 10:00:46 -04:00
a74c61d6d5
vc707: gpio_bd changes
2015-03-23 10:00:46 -04:00
7c921474bf
adv7511_zed: Update project to the new framework
2015-03-23 13:01:51 +02:00
8443e94442
ad9434_fmc: Update project to the new framework
2015-03-23 13:00:50 +02:00
43673f6b9d
imageon_zc706: Update the project to the new framework
2015-03-23 12:45:34 +02:00
c1c6787b91
fmcomms2: Updated VC707 design with the latest base design
2015-03-20 18:22:48 +02:00
69326a72ef
VC707: Updated base design
2015-03-20 18:20:44 +02:00
b12187433d
adv7511_zc706: Interrupts and framework updates
2015-03-20 13:30:24 +02:00
cba3dde3dc
fmcadc4: 2014.4 updates
2015-03-19 16:33:14 -04:00
9e1e4969ff
fmcadc4: 2014.4 updates
2015-03-19 16:33:14 -04:00
9f727776e9
fmcadc4: 2014.4 updates
2015-03-19 16:33:14 -04:00
34d95c1969
fmcadc4: 2014.4 updates
2015-03-19 16:33:14 -04:00
1354836799
fmcadc4: 2014.4 updates
2015-03-19 16:33:14 -04:00
7e0bfca0c6
fmcadc4: 2014.4 updates
2015-03-19 16:33:14 -04:00
ee87421419
fmcomms6: 2014.4 updates
2015-03-19 15:36:52 -04:00
4d91d85265
fmcomms6: 2014.4 updates
2015-03-19 15:36:51 -04:00
5192adf5a7
fmcomms6: 2014.4 updates
2015-03-19 15:36:50 -04:00
c8d60d249b
fmcomms6: 2014.4 updates
2015-03-19 15:36:48 -04:00
9571ce3e3b
fmcomms6: 2014.4 updates
2015-03-19 15:36:47 -04:00
de14146b0b
fmcadc2: 2014.4 updates
2015-03-19 13:22:30 -04:00
771215cbbc
fmcadc2: 2014.4 updates
2015-03-19 13:22:30 -04:00
01de3e7984
fmcadc2: 2014.4 updates
2015-03-19 13:22:30 -04:00
b4bee697cb
fmcadc2: 2014.4 updates
2015-03-19 13:22:30 -04:00
126158629c
fmcadc2: 2014.4 updates
2015-03-19 13:22:30 -04:00
275ce42bc9
daq3: 2014.4 updates
2015-03-19 12:45:55 -04:00
caa0e27bd6
daq3: 2014.4 updates
2015-03-19 12:45:54 -04:00
423b436601
daq3: 2014.4 updates
2015-03-19 12:45:52 -04:00
0c94ea8d2b
daq3: 2014.4 updates
2015-03-19 12:45:51 -04:00
2fa475cca2
daq3: 2014.4 updates
2015-03-19 12:45:50 -04:00
ec0b6ac754
ad9739a/zc706: 2014.4 updates
2015-03-19 11:36:27 -04:00
c236c38e93
ad9739a/zc706: 2014.4 updates
2015-03-19 11:36:27 -04:00
18112d723f
ad9739a/zc706: 2014.4 updates
2015-03-19 11:36:27 -04:00
8542c2b0d7
rfsom: sd1 to sd0 changes
2015-03-19 09:34:15 -04:00
d72c525b46
rfsom: sd1 to sd0 changes
2015-03-19 09:34:14 -04:00
fb5966f9fd
rfsom: sd1 to sd0 changes
2015-03-19 09:34:13 -04:00
6cc8f142f1
rfsom: sd1 to sd0 changes
2015-03-19 09:34:12 -04:00
f0d08abe03
fmcomms2: Fix system_top.v for a few carrier
...
Interrupts are connected inside IPI. Fix system_top for zed, zc702, zc706 and kc705.
2015-03-18 10:37:24 +02:00
72b41c981f
kc705_base: Fix base address overlap
2015-03-18 10:33:17 +02:00
9b6531f79f
ad6676evb: 2014.4 updates
2015-03-17 16:53:13 -04:00
ee89862de9
ad6676evb: 2014.4 updates
2015-03-17 16:53:13 -04:00
1da8356f05
ad6676evb: 2014.4 updates
2015-03-17 16:53:13 -04:00
7456ca67a8
ad6676evb: 2014.4 updates
2015-03-17 16:53:13 -04:00
08a773b92d
fmcomms2/rfsom: interrupt fix
2015-03-17 16:31:12 -04:00
a92c5cb4ff
fmcomms7: 2014.4 updates
2015-03-17 14:01:47 -04:00
18891d036b
fmcomms7: 2014.4 updates
2015-03-17 14:01:47 -04:00
b2e05ce108
fmcomms7: 2014.4 updates
2015-03-17 14:01:47 -04:00
3e73b711e8
fmcomms7: 2014.4 updates
2015-03-17 14:01:47 -04:00
8cb96533d3
fmcomms7: 2014.4 updates
2015-03-17 14:01:46 -04:00
7bdce3837e
fmcomms2: Update interrupts
...
The new interrupts connections are made inside IPI by the process called 'ad_cpu_interrupt'.
2015-03-16 19:13:45 +02:00
65b16551c3
fmcomms2_kc705: Fix system_top connections
2015-03-16 19:12:04 +02:00
cea2d90eb2
base_kc705: Fix different issues
...
+ No more constant block inside IPI.
+ Gpio switch/led is on the axi_gpio first channel.
+ Fix the address map
+ Remove hdmi/spdif related constraints from base constraints
2015-03-16 19:10:57 +02:00
65654b77ff
fmcomms2_kc705: Update design to the new hdl framework
2015-03-13 18:54:28 +02:00
7befef6662
fmcomms2_zed: Update design to the new hdl framework
2015-03-13 18:52:57 +02:00
f7dd466469
adi_board.tcl : Fix some issue with the ad_mem_hpx_interconnect
...
Sometimes the find_bd_objs does not do its job, so need to double check that the interface clock is already connected to the p_clock or not.
Not sure about the cause of this behavior, need more investigation. Issue was found first at KC705 base design.
2015-03-13 18:51:21 +02:00
70e1d13a7b
fmcomms2: Updated project
2015-03-13 12:49:17 +02:00
ea303c6f61
zc702: Updated base design to the latest model
2015-03-13 12:44:08 +02:00
17d8c1b72b
daq2: move intrs into ipi
2015-03-12 16:17:17 -04:00
3a2d1004b5
daq2: move intrs into ipi
2015-03-12 16:17:09 -04:00
b1b46ed820
daq2: move intrs into ipi
2015-03-12 16:17:04 -04:00
ff3dcbc2cb
daq2: move intrs into ipi
2015-03-12 16:16:55 -04:00
8ad8ec4d1e
ml605 removed
2015-03-12 13:00:28 -04:00
e520f5c55a
ad9671_fmc: removed
2015-03-12 12:00:46 -04:00
73680d1ed9
fmcomms2/ml605: removed
2015-03-12 11:59:18 -04:00
18c03a57f8
adv7511/mb: added board files
2015-03-12 11:09:32 -04:00
7f462a1b34
adv7511/mb: added board files
2015-03-12 11:09:27 -04:00
15967f913f
adv7511/mb: added board files
2015-03-12 11:09:20 -04:00
8d0c3573cc
adv7511/kcu105: hdmi/spdif moved out of base design
2015-03-11 15:22:39 -04:00
491b67c13a
adv7511/kcu105: hdmi/spdif moved out of base design
2015-03-11 15:22:39 -04:00
68361bafd4
zc706_base: The FCLK_CLK2 is not used.
2015-03-11 18:10:32 +02:00
a3e73a1837
ad9467_fmc: Fix port names at ILA logic
...
In the version 2014.2 the output port of a constant module was changed from 'const' to 'dout'.
This commit fix the non working ILA.
2015-03-11 14:45:02 +02:00
543bfe9d44
daq2/kcu105: removed hdmi/spdif
2015-03-10 16:15:16 -04:00
ae16aeb064
kcu105/adv7511: moved hdmi/spdif out of base design
2015-03-10 16:15:15 -04:00
d7993401e6
kcu105/adv7511: moved hdmi/spdif out of base design
2015-03-10 16:15:14 -04:00
09b916d0c7
kcu105/adv7511: moved hdmi/spdif out of base design
2015-03-10 16:15:13 -04:00
20b2c19987
kcu105/adv7511: moved hdmi/spdif out of base design
2015-03-10 16:15:11 -04:00
ad41d250a8
kcu105/adv7511: moved hdmi/spdif out of base design
2015-03-10 16:15:10 -04:00
1cf8092ba9
fmcomms2/zc706: spi/gpio changes
2015-03-10 16:06:22 -04:00
631c71373a
fmcomms2/zc706: spi/gpio changes
2015-03-10 16:06:18 -04:00
796a0f4f2b
fmcomms2/zc706: spi/gpio changes
2015-03-10 16:06:13 -04:00
8967903d76
zc706: intr sensitivity level-high
2015-03-10 16:05:05 -04:00
7012172f66
fmcomms2: spi/gpio moved to base design
2015-03-10 15:27:32 -04:00
7da65ef3db
fmcomms2: spi/gpio moved to base design
2015-03-10 15:27:28 -04:00
abae36b12f
fmcomms2: spi/gpio moved to base design
2015-03-10 15:27:22 -04:00
9e57e919c4
fmcomms2: spi/gpio moved to base design
2015-03-10 15:26:57 -04:00
a68463d033
rfsom: board updates
2015-03-10 15:26:31 -04:00
e38356b243
rfsom: board updates
2015-03-10 15:26:24 -04:00
c0eef42647
adi_board: enable ps7 hp if needed
2015-03-09 16:12:23 -04:00
59457cb3d4
daq2/zc706: base system updates
2015-03-09 16:10:56 -04:00
ce5ece5494
daq2/zc706: base system updates
2015-03-09 16:09:54 -04:00
104782af87
daq2/kcu105: base system updates
2015-03-09 16:09:07 -04:00
548ae9d39e
daq2: move gpio/spi to base design
2015-03-09 16:08:25 -04:00
f0395b646c
plddr3: ad_connect updates
2015-03-09 16:07:37 -04:00
031dffa80c
zc706: move gpio/spi to base design
2015-03-09 16:07:02 -04:00
2302f282d3
sys_dmafifo: ad_connect updates
2015-03-09 16:06:06 -04:00
545c0baada
kcu105: gpio led/sw merged to bd default
2015-03-09 16:05:28 -04:00
b31d9abd91
kcu105: gpio/spi moved to base design
2015-03-09 16:04:09 -04:00
ed28b47203
board: optimize interconnect for performance
2015-03-06 12:38:52 -05:00
d5eaadd872
daq2: remove ila for kcu105 ddr-300M timing
2015-03-06 12:38:08 -05:00
1db5f4696f
kcu105: isolate ddr-300M from interconnect-100M timing
2015-03-06 12:37:31 -05:00
da5b136f5a
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
0ac1676318
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
7fba7cc6e5
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
af465cbc80
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
1220b53c8c
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
75c4228987
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
605d23d3a4
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
91765fdd82
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
7bf4141a3f
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
bf1388b05e
kcu105: rev.d changes
2015-03-04 12:43:04 -05:00
4f918cdce9
2014.4.1 ultrascale updates
2015-02-26 16:10:57 -05:00
847c2e049a
kcu105: removed lutram constraints
2015-02-26 16:09:55 -05:00
1613f7fb41
cftl_cip: Add util_pmod_fmeter IP to library
...
Frequency meter IP for CN0332.
2015-02-23 17:20:12 +02:00
abde4048e0
fmcomms1: Add extra AXI slice on ADC DMA path
...
Add a extra AXI slice on the ADC DMA data path to the HP interconnect to
improve the timing.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-20 16:43:45 +01:00
b9d16a7eb1
scripts: renaming board parameters
2015-02-20 09:12:30 -05:00
288f5378ff
rfsom: schematic changes
2015-02-18 14:32:41 -05:00
93e2bcd911
rfsom: schematic changes
2015-02-18 14:32:30 -05:00
383cf3b3a3
rfsom: schematic changes
2015-02-18 14:32:20 -05:00
d2e9b1fe03
rfsom: schematic changes
2015-02-18 14:32:04 -05:00
3113abf038
cftl_cip: Add gpio counter for CN0332
...
Add a counter core to the design, to support the CN0332 pmod with a speed sensor.
Change a naming for the custom cores.
2015-02-18 18:24:46 +02:00
e111e1336e
conflicts-
2015-02-06 22:14:21 -05:00
2d607d765b
cftl_cip: Add a clock input to the device core, for the SPI clock.
...
This clock can be adjustable from the system_project.tcl
2015-02-04 14:55:17 +02:00
996e1b7970
rfsom: constraint updates
2015-02-03 14:20:34 -05:00
fd2ab02174
cftl_std: Added in the constraint file comments regarding supported CFTLs
2015-01-29 16:27:43 +02:00
d69d105b5d
vc707_common: Fix address mapping
...
The axi_ethernet/eth_buf/S_AXI_2TEMAC address space and axi_ethernet/eth_mac/s_axi/Reg address
segment does not exist in 2014.4.
2015-01-29 12:22:06 +02:00
e8ff30119d
vc707_xdc: Delete unnecessary clock definition
2015-01-29 11:39:10 +02:00
6c8ea24f20
common: Update VC707 base design to 2014.4
2015-01-28 16:24:52 +02:00
e1d8dd10a9
daq2: Initial check in of the VC707 based project
...
NOTE: Can not communicate with the clock chip, rx/tx PLL not locking.
2015-01-28 16:24:06 +02:00
659e0cca4e
cftl_cip: Initial check in.
...
Project cftl_cip supports the following Circuits from the Lab pmods:
+ EVAL-CN0350-PMDZ
+ EVAL-CN0335-PMDZ
+ EVAL-CN0336-PMDZ
+ EVAL-CN0337-PMDZ
Note: Additional testing needed!
2015-01-23 18:29:32 +02:00
463a3bbc88
cftl_std: Updated project. Switched to PS7 gpio. Renamed signals.
2015-01-23 14:11:33 +02:00
9672271155
fmcjestadc1: a5gt: Updated project to work with linux and fixed ethernet
...
- added phy reset mechanism for proper functioning of the ethernet
- not all DDR is accesible, as NIOS2 can't access it with MMU enabled
2015-01-23 13:30:56 +02:00
5a77ab0161
a5gt:common: Added phy reset signal from ethernet in pin assignments
2015-01-23 12:31:41 +02:00
050f17e034
a5gt3: common: corrected naming in pin assignments. added reset signal from FPGA2
2015-01-23 12:30:16 +02:00
72e89852b6
daq2/kc705: 2014.4 updates
2015-01-14 12:58:08 -05:00
024d9e7309
replace export hardware -- hwdef/sysdef
2015-01-13 13:40:21 -05:00
03988f1c9f
kcu105-daq2-2014.4-- intermediate fixes
2015-01-13 13:40:20 -05:00
b595cce697
kcu105-daq2-2014.4-- intermediate fixes
2015-01-13 13:40:18 -05:00
b0b4bfe531
kcu105-daq2-2014.4-- intermediate fixes
2015-01-13 13:40:17 -05:00
47871287f3
kc705: Updated base project with linear flash. Updated all depending projects
2015-01-13 10:19:07 +02:00
b9e2c5659f
fmcomms2: 2014.4
2015-01-09 14:12:54 -05:00
9e64df917c
daq2: 2014.4
2015-01-09 14:12:53 -05:00
65d9f08763
zc706: mig 2014.4
2015-01-09 14:12:52 -05:00
868df1aac8
zc706: mig 2014.4
2015-01-09 14:12:51 -05:00
0258afbadc
board: add ddr seg variable
2015-01-09 14:12:50 -05:00
22d881981e
cftl_std: Renamed cftl standard project
2015-01-09 19:44:13 +02:00
debbe31713
Merge remote-tracking branch 'origin/master' into dev
2015-01-09 11:12:56 -05:00
117686f352
ad9739a: updates for ad9739a
2015-01-09 10:54:50 -05:00
785d3a4ae3
ad9739a: updates for ad9739a
2015-01-09 10:54:40 -05:00
e8d0782a2e
ad9739a: updates for ad9739a
2015-01-09 10:54:22 -05:00
baea2090d6
ad9739a: updates for ad9739a
2015-01-09 10:54:12 -05:00
c9b6411e86
ad9739a: updates for ad9739a
2015-01-09 10:54:00 -05:00
51e6d0888a
cftl_xil_zed: Initial commit for common platform used with CFTL circuits
...
This common platform uses PS7 SPI and I2C to communicate with different chips.
On different connectors different pin configurations are supported:
- On connector JA, a spi interface and a 2 pin GPIO
- On connector JB, a I2C interface
- On connector JC, a spi interface with 2 chip selects
2015-01-09 17:47:29 +02:00
a9cc8f6c91
ad9739a_fmc: added
2015-01-08 10:35:59 -05:00
a170ebfb82
imageon: Initial commit
...
Initial commit of the IMAGEON project for ZC706. NOT tested.
2015-01-08 17:01:22 +02:00
f566268db5
zed_common: Updated common to 2014.4
2015-01-08 11:59:26 +02:00
f6df66ea06
motcon2_fmc: initial commit of the base design
...
Because vivado crashes when adding the speed detector, it's not part of this commit.
The controller is also not part of this commit
2015-01-08 11:57:22 +02:00
eb569b991d
dmafifo- remove util fifo setup
2015-01-06 16:23:14 -05:00
9e707d8a33
rfifo: wrapper updates
2015-01-06 16:17:33 -05:00
a944deebd5
wfifo: wrapper updates
2015-01-06 16:17:25 -05:00
d2baf17ff0
rfsom: updated to rfsom
2014-12-23 14:04:02 -05:00
3d1ba585ee
rfsom: updated to rfsom
2014-12-23 14:04:01 -05:00
19c2da836c
rfsom: updated to rfsom
2014-12-23 14:03:59 -05:00
61ba4f4357
rfsom: updated to rfsom
2014-12-23 14:03:58 -05:00
614dfcd93c
rfsom: updated to rfsom
2014-12-23 14:03:57 -05:00
4b571ded8f
fmcomms2/rfsom: initial commit
2014-12-23 14:03:56 -05:00
ee52602c89
rfsom: initial commit
2014-12-23 14:03:55 -05:00
8e41af7b92
fmcomms2: 2014.4 update
2014-12-23 14:03:54 -05:00
0de1a38245
zc706: 2014.4 update
2014-12-23 14:03:52 -05:00
43037a42eb
scripts: 2014.4 update
2014-12-23 14:03:51 -05:00
71baa129a7
VC707: Fixed linear flash timings
2014-12-19 15:45:14 +02:00
2ff72d60d1
fmcomms2: Updated VC707 project to fix ethernet problem
2014-12-19 15:45:05 +02:00
4a9c4cdf19
fmcadc2_zc706: Fix PLDDR fifo name
2014-12-19 13:01:33 +02:00
6230cb25b7
fmcomms7_zc706: Add constraint file for PLDDR
2014-12-19 13:01:27 +02:00
6e124c4c24
fmcomms7_zc706: Connect PLDDR rst to external push button
2014-12-19 13:01:21 +02:00
a0b83bac7f
fmcomms7_zc706: Delete trailing spaces from system top
2014-12-19 13:01:15 +02:00
362b0f5300
daq3_zc706: Add constraint file for PLDDR
2014-12-19 13:01:10 +02:00
d77e28e372
daq3_zc706: Connect PLDDR rst to external push button
2014-12-19 13:01:05 +02:00
d483801e2d
daq3_zc706: Delete trailing spaces from system_top
2014-12-19 13:00:59 +02:00
df205f5cea
fmcadc2_zc706: Connect PLDDR rst to external push button
2014-12-19 13:00:53 +02:00
8fc1f046a4
fmcadc4_zc706: Add constraint file for PLDDR
2014-12-19 13:00:48 +02:00
7ec1e282d9
daq2_zc706: Add constraint file for the PLDDR
2014-12-19 13:00:42 +02:00
a6cf615ee0
zc706_constr: Move the sys_rst related constraint definition to zc706_system_mig_constr.xdc
2014-12-19 13:00:35 +02:00
153a4cef18
daq2: missing sys_rst decl.
2014-12-19 13:00:21 +02:00
ad144ef06a
plddr3: sys-rst from board pushbutton
2014-12-19 13:00:07 +02:00
33a8c8a155
plddr3: sys-rst from board pushbutton
2014-12-19 13:00:01 +02:00
0cc29fe03b
plddr3: sys-rst from board pushbutton
2014-12-19 12:59:54 +02:00
51bdcb1b12
plddr3: sys-rst from board pushbutton
2014-12-19 12:59:48 +02:00
daba3fb72e
plddr3: sys-rst from board pushbutton
2014-12-19 12:59:42 +02:00
758ac6bb8e
plddr3: sys-rst from board pushbutton
2014-12-19 12:59:35 +02:00
1a9eb8196a
VC707: Fixed linear flash timings
2014-12-18 17:49:00 +02:00
23e2886b5d
fmcadc2_zc706: Fix PLDDR fifo name
2014-12-18 16:57:19 +02:00
b684c8bf33
fmcomms7_zc706: Add constraint file for PLDDR
2014-12-18 10:15:11 +02:00
ae09030044
fmcomms7_zc706: Connect PLDDR rst to external push button
2014-12-18 10:14:32 +02:00
0aa4661122
fmcomms7_zc706: Delete trailing spaces from system top
2014-12-18 10:13:16 +02:00
e81327b794
daq3_zc706: Add constraint file for PLDDR
2014-12-18 10:08:33 +02:00
8121d11993
daq3_zc706: Connect PLDDR rst to external push button
2014-12-18 10:07:52 +02:00
090aed508e
daq3_zc706: Delete trailing spaces from system_top
2014-12-18 10:06:29 +02:00
abdb59a28e
fmcadc2_zc706: Connect PLDDR rst to external push button
2014-12-18 10:04:01 +02:00
31a95042cf
fmcadc4_zc706: Add constraint file for PLDDR
2014-12-18 10:01:16 +02:00
39cc7b8b2e
daq2_zc706: Add constraint file for the PLDDR
2014-12-18 10:00:35 +02:00
59e610be09
zc706_constr: Move the sys_rst related constraint definition to zc706_system_mig_constr.xdc
2014-12-17 19:07:43 +02:00
656246f2ba
fmcomms2: Updated VC707 project to fix ethernet problem
2014-12-17 16:16:01 +02:00
90fe993db2
daq2: missing sys_rst decl.
2014-12-15 14:39:40 -05:00
725b407523
plddr3: sys-rst from board pushbutton
2014-12-15 12:59:36 -05:00
7b1e3d77e8
plddr3: sys-rst from board pushbutton
2014-12-15 12:59:25 -05:00
0a6769fda9
plddr3: sys-rst from board pushbutton
2014-12-15 12:59:16 -05:00
f99bd3609b
plddr3: sys-rst from board pushbutton
2014-12-15 12:59:04 -05:00
77fa96fa67
plddr3: sys-rst from board pushbutton
2014-12-15 12:58:54 -05:00
ed7f8b4908
plddr3: sys-rst from board pushbutton
2014-12-15 12:58:44 -05:00
ca36ef0e02
Merge remote-tracking branch 'origin/hdl_2014_r2' into dev
2014-12-11 11:26:30 -05:00
d82952b22a
daq2/kcu105: lane assignment fixes
2014-12-11 11:19:38 -05:00
7dddac84f1
motcon1_fmc: Fixed issue introduced by merge
2014-12-11 14:32:32 +02:00
9e8fd8ed9e
base_design: External IIC reset is connected to Vcc
...
External IIC reset is connected to Vcc in case of AC701, KC705 and VC707
2014-12-11 11:14:54 +02:00
caa0268434
base_design: External IIC reset is connected to Vcc
...
External IIC reset is connected to Vcc in case of AC701, KC705 and VC707
2014-12-11 11:13:07 +02:00
86ad9213e0
fmcomms2: Update c5soc system_timing script
2014-12-10 17:54:11 +02:00
6ac774a9dd
fmcjesdadc1: Update altera system_timing script
2014-12-10 17:53:29 +02:00
e7c920bbd9
fmcomms2/ml605: compilation fixes
2014-12-09 14:32:39 -05:00
4cf435ee39
fmcomms2/ml605: compilation fixes
2014-12-09 14:32:39 -05:00
8b41034825
fmcomms2/ml605: compilation fixes
2014-12-09 14:32:39 -05:00
842ba19aaa
fmcomms2/ml605: compilation fixes
2014-12-09 14:31:12 -05:00
d7a6b5e6d0
fmcomms2/ml605: compilation fixes
2014-12-09 14:31:11 -05:00
d57b6b01c6
fmcomms2/ml605: compilation fixes
2014-12-09 14:31:10 -05:00
9103f6706e
Merge branch 'hdl_2014_r2' of https://github.com/analogdevicesinc/hdl into hdl_2014_r2
2014-12-09 17:38:37 +01:00
138e789fb6
projects/fmcjesdadc1/common/fmcjesdadc1_bd.tcl: Fix interrupts
...
sys_concat_intc: don't reset NUM_PORTS to 6
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-09 17:38:16 +01:00
772edbae20
fmcadc4: fifo updates
2014-12-09 10:43:02 -05:00
d149890426
fmcadc4: fifo updates
2014-12-09 10:43:02 -05:00
dad0745fbe
fmcadc4: fifo updates
2014-12-09 10:43:02 -05:00
987257e3c3
fmcadc4: fifo updates
2014-12-09 10:43:01 -05:00
0c6cbdd303
fmcadc4: fifo updates
2014-12-09 10:38:51 -05:00
f044ab94e0
fmcadc4: fifo updates
2014-12-09 10:38:50 -05:00
e2a9502e1e
fmcadc4: fifo updates
2014-12-09 10:38:49 -05:00
a2607a8057
fmcadc4: fifo updates
2014-12-09 10:38:47 -05:00
a6b7b9d880
ad9467_kc705: Fix memory segment offset for SEG_axi_ddr_cntrl
2014-12-09 16:20:39 +02:00
2e4640d5c5
ad9467_kc705: Fix memory segment offset for SEG_axi_ddr_cntrl
2014-12-09 16:17:46 +02:00
4d28825741
ad9467_kc705: Fix typos.
2014-12-09 13:46:51 +02:00
a0d5e7862e
ad9467_kc705: Fix typos.
2014-12-09 12:07:49 +02:00
915ee7a268
fmcjesdadc1_kc705: Connect the SPI interrupt to the controller
2014-12-09 11:54:16 +02:00
ee04eb637b
ad9467_kc705: Fix interrupts
2014-12-09 11:54:08 +02:00
37c3af9929
fmcjesdadc1_kc705: Connect the SPI interrupt to the controller
2014-12-09 11:51:36 +02:00
b83299c606
ad9467_kc705: Fix interrupts
2014-12-09 11:48:46 +02:00
1b4a4bc06e
daq3: compilation fixes - latest changes
2014-12-08 14:51:52 -05:00
Rejeesh Kutty
Istvan Csomortani
Adrian Costina
Lars-Peter Clausen
Michael Hennerich