714d415804
daq2/a10gx- signaltap changes
2015-06-19 14:33:04 -04:00
51e6a74a3d
daq2/a10gx- add xmit swap
2015-06-19 14:32:59 -04:00
d6b1260678
daq2/a10gx- signal tap + gpio
2015-06-19 14:32:58 -04:00
67df6b3ea8
a10gx- disable lab cell on dsp input register
2015-06-19 14:32:54 -04:00
db76fe3298
tquest- generate the timing report file
2015-06-19 14:32:53 -04:00
c3ea99d1f8
fmcadc2: Fixed zc706 spi connection
2015-06-19 13:31:59 +03:00
301226c766
fmcjesdadc1: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:47 +03:00
f01ba54c5f
fmcomms1: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:33 +03:00
009d33f0a0
ad9467: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:20 +03:00
2e46bda916
motcon2_fmc: Update project to use the latest util_gmii_to_rgmii
2015-06-16 17:43:10 +03:00
8fc0e0e62d
fmcjesdadc1: Fixed vc707 ethernet connections
2015-06-16 16:27:09 +03:00
142f802f54
adv7511: Fixed vc707 ethernet connections
2015-06-16 16:26:58 +03:00
4c80013faf
projects/daq2: gt lane split
2015-06-12 15:56:03 -04:00
e6525136a9
daq2/common: axi_ad9144_fifo needs a proper reset sequence
...
Connect the axi_ad9144_fifo/dma_rst signal to sys_cpu_reset
2015-06-12 14:03:46 +03:00
f587aa42d9
a10gx- tx sync
2015-06-10 14:32:25 -04:00
e3e4af5c51
daq2/zc706: open ports
2015-06-10 14:25:58 -04:00
97ab5e0ef7
fmcomms1: Update project to integrate the new util_wfifo
2015-06-10 15:16:17 +03:00
00b8c171b8
a10gx: pll locked to reset controller
2015-06-08 15:00:11 -04:00
be6d6f627a
ad9265: Removed ILA
2015-06-08 15:03:34 +03:00
25e56a4d03
arradio: renamed fmcomms2 c5soc to arradio
2015-06-08 11:35:21 +03:00
dc7064ab95
fmcomms2/vc707 - wfifo changes
2015-06-05 12:44:04 -04:00
25f1ad73f0
fmcomms2/freqcvt: Update SPI interface I/O
2015-06-05 18:16:14 +03:00
f1e75963a2
fmcomms2: wfifo+pack changes
2015-06-05 09:20:50 -04:00
47469ad375
ad9434/ad9467 : Connect reset signal for AXI streaming interface of the device dma
2015-06-04 18:09:48 +03:00
3b1ea7e528
axi_ad9361/tdd: Cherry picked commit 598ece4 from hdl_2015_r1 branch
...
598ece4c8d
2015-06-04 18:09:47 +03:00
a8a71b4971
alt-tq: common file
2015-06-04 11:00:25 -04:00
f81d22a17a
altera- common timing check
2015-06-04 10:56:32 -04:00
d111692608
daq2/a10gx- ddr-ref @133
2015-06-04 10:53:16 -04:00
886c24f597
tq-alt: added
2015-06-04 10:53:14 -04:00
264dbfed35
common: rfsom: Add constraints for the eth1 rx clock
...
Add clock rate constraints for the eth1 rx clock, otherwise the tools
assume the RX paths are unconstrained and creates a bitstream which
violates hold times which causes bit errors on the RX path.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-03 17:21:43 +02:00
71b5004b25
projects- drp moved to up-clock domain
2015-06-01 14:57:59 -04:00
f9ffaf457d
projects/daq2- drp moved to up clock
2015-06-01 13:39:26 -04:00
4a701d3895
a10gx- no-ddr
2015-06-01 11:00:02 -04:00
aa24c442f5
a10gx- no-ddr
2015-06-01 11:00:01 -04:00
5250635162
cn0363: Fix ad_iobuf signal names
...
The signal names for the ad_iobuf were recently changed, adjust the cn0363
project accordingly.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-27 13:25:19 +02:00
73d7bc111e
cn0363: Add missing Makefiles
...
Those were accidentally overlooked during the initial commit of the project.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-26 18:44:24 +02:00
77eff35d67
motcon2_fmc: Fixed constraint for renamed port
2015-05-23 19:02:48 +03:00
29ca9e4b8c
vc707: common, fixed address range for flash
2015-05-23 00:14:08 +03:00
8bd5fa5802
kc705: Common, fixed address range for the flash. Changed the start address so that it won't interfere with other cores
2015-05-23 00:10:06 +03:00
f91fbf1bc1
ad9434_zc706: Fix SPI interface
2015-05-22 12:31:48 +03:00
a6cae6b477
iobuf: do is a system verilog keyword
2015-05-21 14:06:17 -04:00
ad3198f623
a10gx: top level fixes
2015-05-21 14:06:15 -04:00
c9832d2f84
Remove ad7175_zed project
...
This project has been superseded by the cn0363 project and can be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-21 17:21:35 +02:00
c53f8c15ee
Add CN0363 project
...
Add support for the CN0363 (colorimeter) board connected to the ZED board.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-21 17:21:35 +02:00
6b9906b22b
Refresh Makefiles
...
Re-generate the Makefiles after a small update to the generation script:
- Entries are sorted alphabetically
- Empty dependency lines are skipped
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-21 14:21:54 +02:00
ebbc0c6ed5
fmcomms5: zc706, removed debug related ila, as the pins were removed from the AD9361 IP
2015-05-21 14:19:22 +03:00
a047d3990a
fmcadc2_vc707: Fix interrupts
...
+ Remove some trailing whitespaces
+ Fix interrupt connections
2015-05-21 11:03:16 +03:00
19b094cab5
daq2/a10gx- added jesd align
2015-05-20 15:39:27 -04:00
f1c30ac225
daq2/a10gx- qsys updates
2015-05-20 14:24:49 -04:00
4927ca85c2
projects- jesd-align port name change
2015-05-20 14:24:26 -04:00
Rejeesh Kutty
Adrian Costina
Istvan Csomortani
Lars-Peter Clausen