Commit Graph

4 Commits (de70157e3a50dae3013609cdcbedf30768d103c2)

Author SHA1 Message Date
Laszlo Nagy 94181206c2 jesd204/tb: Update testbenches 2021-02-05 15:24:15 +02:00
Lars-Peter Clausen d72fac4b1e Add missing timescale annotations
For consistent simulation behavior it is recommended to annotate all source
files with a timescale. Add it to those where it is currently missing.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-10-17 10:32:47 +03:00
Adrian Costina 3b9f733408
jesd204: Add RX error statistics (#98)
* jesd204: Add RX error statistics

Added 32 bit error counter per lane, register 0x308 + lane*0x20

On the control part added register 0x244 for performing counter reset and counter mask
Bit 0 resets the counter when set to 1
Bit 8 masks the disparity errors, when set to 1
Bit 9 masks the not in table errors when set to 1
Bit 10 masks the unexpected k errors, when set to 1

Unexpected K errors are counted when a character other than k28 is detected. The counter doesn't add errors when in CGS phase

Incremented version number
2018-05-07 15:33:00 +03:00
Lars-Peter Clausen 1202286c3d Add ADI JESD204 link layer cores
The ADI JESD204 link layer cores are a implementation of the JESD204 link
layer. They are responsible for handling the control signals (like SYNC and
SYSREF) and controlling the link state machine as well as performing
per-lane (de-)scrambling and character replacement.

Architecturally the cores are separated into two components.

1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take
care of the JESD204 protocol handling. They have configuration and status
ports that allows to configure their behaviour and monitor the current
state. The processing cores run entirely in the lane_rate/40 clock domain.

They have a upstream and a downstream port that accept and generate raw PHY
level data and transport level payload data (which is which depends on the
direction of the core).

2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The
configuration interface cores provide a register map interface that allow
access to the to the configuration and status interfaces of the processing
cores. The configuration cores are responsible for implementing the clock
domain crossing between the lane_rate/40 and register map clock domain.

These new cores are compatible to all ADI converter products using the
JESD204 interface.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-23 11:16:07 +02:00