Rejeesh Kutty
c1aac4a9fb
common: adc/dac fifo board designs
2017-02-27 16:06:39 -05:00
Istvan Csomortani
1d6ddacfd6
axi_ip_constr: Fix constraints
...
The filter for CDC registers were too generic, and a few non-CDC
register were set as asynchronous register.
2017-02-27 16:25:09 +02:00
Adrian Costina
1c8e63cb68
axi_adc_trigger: Added triggered register
2017-02-27 14:26:19 +02:00
Adrian Costina
37a1c98c12
axi_logic_analyzer: Switched from BUFGMUX to BUFGMUX_CTRL for glitch free clock switching
2017-02-27 14:19:54 +02:00
Adrian Costina
545e458997
m2k: Standalone, ignored critical warning for contraints that should only be applied at the implementation stage
2017-02-27 14:17:29 +02:00
Adrian Costina
eda585f0e4
m2k: Connected data[0] and trigger[0] pins to the logic analyzer clock generator input 2
2017-02-27 14:16:32 +02:00
Adrian Costina
908da60ab6
m2k: zed, changed constraints so they are the same with the ZED default configuration
...
- the voltage can be physically changed between 1.8V, 2.5V and 3.3V
2017-02-27 14:13:34 +02:00
Istvan Csomortani
0059c907ea
adrv9371: Drive the TX DMA interface with sys_dma_clk
2017-02-24 15:50:12 +02:00
Istvan Csomortani
11623e79be
axi_dacfifo: Fix clock for read address generation
2017-02-24 15:47:04 +02:00
Istvan Csomortani
3e596347fd
axi_dacfifo: Delete unused wires
2017-02-24 15:45:51 +02:00
Istvan Csomortani
ac2e5a9dac
constraints: Update constraints
...
Xilinx recommends that all synchronizer flip-flops have
their ASYNC_REG property set to true in order to preserve the
synchronizer cells through any logic optimization during synthesis
and implementation.
2017-02-24 13:43:32 +02:00
Istvan Csomortani
f326c03ff3
axi_dacfifo: Define constraint for bypass
...
The bypass module currently is supported, when the DMA data width
is equal with the DAC data width.
The dac_data output is enabled with dac_valid.
2017-02-24 12:35:42 +02:00
Istvan Csomortani
b9d3039568
axi_dacfifo: Register the dac_valid signals
2017-02-24 12:34:58 +02:00
Istvan Csomortani
debc6e2066
axi_dacfifo: Data from DMA is validated with dma_ready too
2017-02-24 12:32:25 +02:00
Istvan Csomortani
dfcd5214a0
axi_dacfifo: axi_dvalid should come from dacfifo_rd module
2017-02-24 12:28:46 +02:00
Istvan Csomortani
6b90054343
axi_ad9361: Define CDC constraint for tdd_sync
2017-02-24 11:24:07 +02:00
Istvan Csomortani
1fce57f6c3
axi_dacfifo: Redesign the bypass functionality
2017-02-23 17:32:31 +02:00
Adrian Costina
573959c826
Makefiles: fixed axi_adxcvr/util_adxcvr Makefiles to include interfaces dependancy
2017-02-23 16:16:34 +02:00
Istvan Csomortani
d820d3d245
util_sync_constr: Preserve 1bit CDCs with ASYNC_REG true
2017-02-23 11:44:01 +02:00
Istvan Csomortani
94bda1d415
axi_ad9361: Preserve 1bit CDCs with ASYNC_REG true
2017-02-23 11:43:10 +02:00
Istvan Csomortani
2da7dd4079
axi_ip_constr: Update constraints
...
Xilinx recommends that all synchronizer flip-flops have
their ASYNC_REG property set to true in order to preserve the
synchronizer cells through any logic optimization during synthesis
and implementation.
2017-02-23 11:33:25 +02:00
Istvan Csomortani
2b354af876
axi_ad9361_tdd: Register the tdd_sync_cntr output
2017-02-23 11:31:23 +02:00
Rejeesh Kutty
c598e84258
remove processing order (no clock def dependency)
2017-02-22 16:02:08 -05:00
Rejeesh Kutty
edd5e9570f
file renamed; sed output; fingers crossed
2017-02-22 15:56:37 -05:00
Rejeesh Kutty
b00dc4b195
plddr3- change to board files
2017-02-22 15:22:50 -05:00
Rejeesh Kutty
89b49d2f67
fifo- as board files
2017-02-22 15:18:50 -05:00
Rejeesh Kutty
879ed64bb6
compression flag changes
2017-02-22 15:15:53 -05:00
Rejeesh Kutty
8a5e2ff46e
sys_wfifo- removed
2017-02-22 15:13:18 -05:00
Rejeesh Kutty
754ac6a403
w/r-fifo- removed
2017-02-22 15:10:06 -05:00
Istvan Csomortani
e3ac341aad
axi_dacfifo: Fix constraints
2017-02-21 14:45:18 +02:00
Adrian Costina
040b61de60
fmcadc5: Updated default parameters
2017-02-20 17:13:58 +02:00
Rejeesh Kutty
a15e05c497
adcfifo- remove axi-byte-width parameter
2017-02-17 15:29:10 -05:00
Rejeesh Kutty
cb3d1883bc
fmcjesdadc1/a5gt- hard placement of ddr hr/qr registers
2017-02-17 15:21:33 -05:00
Istvan Csomortani
981a61bf16
axi_dacfifo: Clean up the axi_dacfifo_wr.v module
2017-02-17 18:40:02 +02:00
Adrian Costina
e8bcbb74da
scripts: fixed tcl syntax for altera projects not meeting timing
2017-02-16 21:21:51 +02:00
Istvan Csomortani
f10866e4c3
axi_*fifo: Delete/replace AXI_BYTE_WIDTH parameter
2017-02-16 19:54:41 +02:00
Istvan Csomortani
95a4ea20c8
axi_dacfifo: Delete redundant parameter BYPASS_EN
2017-02-16 19:53:44 +02:00
Adrian Costina
8453d758c2
scripts: If an altera project doesn't meet timing, rename the sof
2017-02-16 19:20:49 +02:00
Istvan Csomortani
343d0472d4
fmcadc2: Move GT setting to common/system_bd.tcl
2017-02-16 14:56:25 +02:00
Istvan Csomortani
07184b31d2
fmcadc2: Define default clock selection for Xilinx GTs
2017-02-16 12:35:24 +02:00
Adrian Costina
358aa48c76
axi_adc_decimate: Fix assignment width
2017-02-15 11:38:43 +02:00
Adrian Costina
86c279c238
pzsdr1: ccbox, moved I2S core to DMA0 and DMA1 to fix critical warnings
2017-02-14 14:51:49 +02:00
Adrian Costina
46290193f3
pzsdr2: ccusb, renamed clk_out to clkout_in
2017-02-14 11:58:11 +02:00
Adrian Costina
27119343f2
pzsdr2: ccusb, connect unused clock pins to GND
2017-02-14 11:56:54 +02:00
Adrian Costina
fa37f4dd0a
pzsdr2: Don't set a disabled parameter
2017-02-14 11:56:08 +02:00
Adrian Costina
6a9b7580de
pzsdr1: ccusb, renamed clk_out to clkout_in
2017-02-14 11:54:46 +02:00
Adrian Costina
acef0113d1
pzsdr1: ccusb, connect unused clock pins to GND
2017-02-14 11:50:37 +02:00
Adrian Costina
46883731eb
pzsdr1: Don't set a disabled parameter
2017-02-14 11:50:06 +02:00
Adrian Costina
c6ee76421b
axi_usb_fx3: Fixed clock domain association
2017-02-14 11:48:07 +02:00
Adrian Costina
a569b6bf0c
pluto: Interpolation, connect fifo_rd_valid to s_axis_data_tvalid
2017-02-13 18:08:52 +02:00