ad743c8403
axi_ad9434: This IP core does not have 'data underflow' port
2015-06-18 16:51:42 +03:00
301226c766
fmcjesdadc1: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:47 +03:00
f01ba54c5f
fmcomms1: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:33 +03:00
009d33f0a0
ad9467: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:20 +03:00
2e46bda916
motcon2_fmc: Update project to use the latest util_gmii_to_rgmii
2015-06-16 17:43:10 +03:00
d137811952
util_gmii_to_rgmii: Updated core so that it has an option to include a delay controller.
...
It also allows to configure the fixed delay value so that no additional constraints are needed
The default value of 18 seems to work very well(450mbps tx / 640 mbps rx) on the motor control platform used for tests
2015-06-16 17:39:31 +03:00
8fc0e0e62d
fmcjesdadc1: Fixed vc707 ethernet connections
2015-06-16 16:27:09 +03:00
142f802f54
adv7511: Fixed vc707 ethernet connections
2015-06-16 16:26:58 +03:00
4c80013faf
projects/daq2: gt lane split
2015-06-12 15:56:03 -04:00
28e8275a5d
library/axi_jesd_gt: split gt lanes
2015-06-12 15:56:03 -04:00
e6525136a9
daq2/common: axi_ad9144_fifo needs a proper reset sequence
...
Connect the axi_ad9144_fifo/dma_rst signal to sys_cpu_reset
2015-06-12 14:03:46 +03:00
ddc08c960c
ad_tdd_control: Connect the reset to all the flops
2015-06-11 12:07:47 +03:00
f587aa42d9
a10gx- tx sync
2015-06-10 14:32:25 -04:00
04eb998ff1
axi_jesd_gt: constraints
2015-06-10 14:29:06 -04:00
e3e4af5c51
daq2/zc706: open ports
2015-06-10 14:25:58 -04:00
e2f4a4c5cf
library: make preset registered for timing paths
2015-06-10 13:41:41 -04:00
df0eaad1e2
gt: constraints
2015-06-10 11:38:15 -04:00
97ab5e0ef7
fmcomms1: Update project to integrate the new util_wfifo
2015-06-10 15:16:17 +03:00
8a1f4bf5f6
ad6676,ad9144,ad9152,ad9234,ad9250,ad9434,ad9467,ad9625,ad652,ad9671,ad9680,ad9739a:Set default driver value for overflow, underflow, gpio_in and dac_sync ports
2015-06-09 14:21:12 +03:00
00b8c171b8
a10gx: pll locked to reset controller
2015-06-08 15:00:11 -04:00
a598e1c614
axi_ad9265: Set default driver value for overflow and underflow ports
2015-06-08 17:50:23 +03:00
ccf887f0ba
axi_ad9643: Set default driver values for overflow, underflow and gpio_in ports
2015-06-08 17:48:41 +03:00
ded0dd5dbe
axi_ad9122: fixed constraints, removed unneded drp reset
2015-06-08 17:45:14 +03:00
c926daca3a
ad9361/tdd: Fix generation of tx_valid_* signals
...
In FDD mode the tx_valid_* signals are generated inside the axi_ad9361_tx module, in function of
the selected dac data rate. In TDD mode, these signals are gated by the tdd_enable and tdd_tx_dp_en signals.
In other words, the tx_valid_* signals will be valid just when tdd_enable and tdd_tx_dp_en is active.
2015-06-08 16:22:21 +03:00
be6d6f627a
ad9265: Removed ILA
2015-06-08 15:03:34 +03:00
25e56a4d03
arradio: renamed fmcomms2 c5soc to arradio
2015-06-08 11:35:21 +03:00
dc7064ab95
fmcomms2/vc707 - wfifo changes
2015-06-05 12:44:04 -04:00
ce60056cd5
wfifo: async reset for cpu side
2015-06-05 12:44:04 -04:00
ab1f9bed10
wfifo: remove srl from sync registers
2015-06-05 12:44:04 -04:00
25f1ad73f0
fmcomms2/freqcvt: Update SPI interface I/O
2015-06-05 18:16:14 +03:00
f1e75963a2
fmcomms2: wfifo+pack changes
2015-06-05 09:20:50 -04:00
da8915296b
pack: ip scripts
2015-06-05 09:20:08 -04:00
6338dfd8b7
ad9361: ip defaults & rst output
2015-06-05 09:19:39 -04:00
cb0324c2b1
wfifo: multi-channel option
2015-06-05 09:19:05 -04:00
2e877389b2
ad9361_tdd: Some naming and hierarchical changes
2015-06-04 18:09:49 +03:00
47469ad375
ad9434/ad9467 : Connect reset signal for AXI streaming interface of the device dma
2015-06-04 18:09:48 +03:00
3b1ea7e528
axi_ad9361/tdd: Cherry picked commit 598ece4 from hdl_2015_r1 branch
...
598ece4c8d
2015-06-04 18:09:47 +03:00
a8a71b4971
alt-tq: common file
2015-06-04 11:00:25 -04:00
f81d22a17a
altera- common timing check
2015-06-04 10:56:32 -04:00
d111692608
daq2/a10gx- ddr-ref @133
2015-06-04 10:53:16 -04:00
886c24f597
tq-alt: added
2015-06-04 10:53:14 -04:00
6548bcd71f
axi_ip- constraints: add rst path
2015-06-04 10:53:13 -04:00
e02273781f
ad_rst- non lpm version
2015-06-04 10:53:12 -04:00
264dbfed35
common: rfsom: Add constraints for the eth1 rx clock
...
Add clock rate constraints for the eth1 rx clock, otherwise the tools
assume the RX paths are unconstrained and creates a bitstream which
violates hold times which causes bit errors on the RX path.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-03 17:21:43 +02:00
91b0f70972
library: remove drp cntrl
2015-06-02 09:58:57 -04:00
2b5abf74d7
util_upack: Show upack_valid only if the channel is activated
2015-06-02 11:36:06 +03:00
71b5004b25
projects- drp moved to up-clock domain
2015-06-01 14:57:59 -04:00
297e885981
library- drp moved to up-clock domain
2015-06-01 14:52:52 -04:00
f9ffaf457d
projects/daq2- drp moved to up clock
2015-06-01 13:39:26 -04:00
e7470036bf
library- drp moved to up clock
2015-06-01 13:39:26 -04:00
Istvan Csomortani
Adrian Costina
Rejeesh Kutty
Lars-Peter Clausen