3d3d1098b4
axi_ad7616: Default DATA_WIDTH is 8 bits
2016-01-28 16:02:01 +02:00
122667259f
ad7616_sdz: Update Make file
2016-01-28 14:48:44 +02:00
fbb0d368bf
axi_ad7616: Add support for parallel interface
2016-01-28 12:37:22 +02:00
cd43ebd8bc
axi_ad7616: The OP_MODE parameter is no longer required
2016-01-26 11:05:33 +02:00
2a17ce275c
axi_ad7616: Control inputs are controlled through GPIO
...
The following control inputs are controlled through GPIO: reset_n, seq_en, hw_rngsel, chsel, crcen, burst and os.
2016-01-25 17:50:50 +02:00
4b962e8d72
spi_engine: The width of the counters depend on the current DATA_WIDTH
2016-01-20 15:44:06 +02:00
c29dd8fad5
axi_ad7616: Fix Makefile
2015-12-21 19:39:58 +02:00
0b55325db9
axi_ad7616: Fix IP packaging script
2015-12-21 19:39:14 +02:00
17e7d1b86f
ad7616: Add Makefiles
2015-12-21 17:09:42 +02:00
8ae9de8fba
axi_ad7616: Update core
...
+ Both the data width and number of SDI lines are configurable
+ SER1W line is hardware configurable, it was removed from the IP
+ Add 'Hardware mode' support for the controller
2015-12-14 16:00:56 +02:00
4e57170384
spi_engine: Update SPI Engine frame work
...
+ data width and number of SDI lines are configurable
+ axi_spi_engine module can have two different type of memory map interface (S_AXI or UP)
2015-12-14 15:57:54 +02:00
29a0f27cd1
ad_edge_detect: Add a flop to output, reset is active high
2015-12-14 15:40:29 +02:00
d6eae81bc1
axi_ad7616: Add the control module to the core, finish up SPI integration
2015-11-13 18:14:21 +02:00
952a491f59
axi_ad7616: Add spi engine to the core
2015-11-12 16:12:16 +02:00
e4927887fd
spi_engine_offload: Add sync_bits to the IP files list
2015-11-10 13:35:15 +02:00
229cd079b9
spi_engine: Fix to support multiple SDI lines
2015-11-10 13:34:29 +02:00
64d1948ea0
axi_ad7616: Initial commit
2015-11-10 13:32:56 +02:00
cf58110a98
Merge branch 'dev' into dev_ad7616
2015-11-03 14:07:48 +02:00
acd9efc528
axi_hdmi_tx: Add parameter to configure the output clock polarity
...
In order to maximize the window where it is safe to capture data we ideally
want to launch data on the opposite edge to which it is captured. Since the
edge on which data is captured depends on the connected device add a
parameter that allows to configure the launching edge.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-11-03 10:59:13 +01:00
a147acd791
spi_engine: Add support for multiple SDI lines.
...
By changing the parameter called SDI_DATA_WIDTH the spi framework can support multiple SDI lines.
The supported number of SDI lines are: 1, 2, 3 and 4.
2015-11-02 18:42:55 +02:00
88568c21e1
util_gtlb: updates for latest axi_jesd_gt
2015-10-30 18:47:36 -04:00
2b6ae00a44
library: add mfifo
2015-10-27 14:52:02 -04:00
f1ed27105f
library/common- reset fix
2015-10-23 14:32:35 -04:00
32b3cfd8b9
axi_usb_fx3: Initial commit of the core with interface stub
2015-10-23 13:27:00 +03:00
9d2b8809df
Makefiles: Updated Makefiles
2015-10-23 10:44:27 +03:00
6fb56079ee
library/util_gtlb: Add Makefile
2015-10-16 13:58:01 +03:00
8ecdb4a4ca
library/tdd_control: Add common registers to the register map and fix init value of a register
...
+ Software in general needs to have access to the VERSION register.
+ tdd_sync_d3 registers init value should be 1'b0
2015-10-16 11:57:54 +03:00
44568f1f64
util_jesd_gt: bad idea, it is needed for ipi
2015-10-15 11:13:08 -04:00
a6ff1b13fc
util_jesd_gt- remove unused parameters
2015-10-15 10:46:07 -04:00
c9a5057b93
library/prcfg : Split data bus to channels
...
Because of the new pack/upack modules on the data path, it makes more sense to split the data interface of the PR modules into separate channels.
The top module will supports max 4 channels.
2015-10-13 11:36:45 +03:00
a753d506c5
axi_mc_controller: Removed channels, as no data needs to be streamed to DMA
2015-10-09 13:54:03 +03:00
694dbd3259
axi_mc_controller: Updated constraints
2015-10-09 13:53:13 +03:00
7c3646e863
axi_mc_current_monitor: Removed stub channel
2015-10-09 13:52:14 +03:00
99e6240126
axi_mc_current_monitor: Updated constraints
2015-10-09 13:51:15 +03:00
d19d9c8fbc
axi_mc_speed: Corrected maximum number of channels
2015-10-09 13:50:25 +03:00
ce01185348
axi_mc_speed: Updated constraints
2015-10-09 13:50:08 +03:00
96d363849e
ad_dds: Registered dds_scale so that Vivado can optimally map the dsp block
2015-10-09 13:43:14 +03:00
df8ac2e726
axi_ad9671: Updated constraints
2015-10-09 13:15:55 +03:00
03b225a802
axi_ad9671: Fixed synchronization mechanism
2015-10-09 13:15:12 +03:00
8321d5a4fb
util_dacfifo: Update read out method
...
Update the way how the fifo push out its content. By default the fifo pushes out all its content, if an xfer_last signal is received, the fifo saves the last write address, and reads out until the saved address.
2015-10-08 17:13:12 +03:00
cd9754afbe
up_gt: separate pll resets to tx/rx
2015-10-02 13:58:30 -04:00
f3ffd5a63f
up_gt: separate pll resets to tx/rx
2015-10-02 13:58:30 -04:00
2b894bc13e
up_gt: separate pll resets to tx/rx
2015-10-02 13:58:30 -04:00
5c3f90a676
up_gt: separate pll resets to tx/rx
2015-10-02 13:58:30 -04:00
ba70c7a4ea
ad9144- ip updates
2015-09-30 11:37:10 -04:00
54fcf06eed
ad9152- ip updates
2015-09-30 11:34:09 -04:00
81a1c21553
util_pmod_adc: Reset line changed to active low reset.
2015-09-30 12:33:46 +03:00
97a9ecfc9a
axi_hdmi_rx: Update constraint file and fix reset line
2015-09-29 18:49:30 +03:00
b765be568f
up_gt_channel: Delete the register, which stores transceiver type
...
Transceiver type is stored in axi_jesd_gt/up_gt only.
2015-09-29 14:23:42 +03:00
cffb2e6226
up_gt_channel: Move the VERSION register to up_gt_channel, in order to preserve its address
2015-09-29 14:19:52 +03:00
Dragos Bogdan
Istvan Csomortani
Lars-Peter Clausen
Rejeesh Kutty
Adrian Costina