be1328c55b
kcu105- added missing ethernet configurations
2017-01-23 10:14:09 -05:00
661413627f
daq3- round about way to avoid ip getting locked
2017-01-20 15:55:33 -05:00
62792ddaed
adrv9371x: Change the axi_adxcvr cores addresses
...
Because the S_AXI interface of the axi_adxcvr core was infered
using the process adi_ip_properties, the interface address range
has changed from 4k to 64k. As a result, all the addresses of
the axi_adxcvr cores were changed and realigned.
2017-01-19 15:23:03 +02:00
ecd152c90d
pzsdr1: ccbrk_cmos, fix clkdiv parameters
2017-01-18 12:04:04 +02:00
165ba76d9d
pzsdr1: Added FIFOs for DAC and ADC paths so that they work at l_clk or l_clk/2
2017-01-18 12:01:24 +02:00
319a883c00
pzsdr2: Added FIFOs for DAC and ADC paths so that they work at l_clk/2 or l_clk/4
2017-01-18 12:00:10 +02:00
9344dd34dc
zcu102: Update project to include clkdiv
2017-01-16 14:47:31 +02:00
4dcad7e116
fmcomms2: zcu102, update clkdiv device parameter
2017-01-16 14:38:37 +02:00
b622b6592e
FMCOMMS5/ZCU102 : Merge from njpillitteri/hdl:dev
...
Pull request Dev #26
2017-01-13 14:47:16 +02:00
d2e7b6b635
fmcomms5: Added FIFOs for DAC and ADC paths so that they work at l_clk/2 or l_clk/4
2017-01-13 14:18:59 +02:00
a36057679a
fmcomms2: Update Makefiles
2017-01-13 14:16:21 +02:00
15c5bc7012
fmcomms2: zcu102, changed clkdiv C_SIM_DEVICE parameter to ultrascale
2017-01-13 13:57:32 +02:00
b84325d43f
fmcomms2: take into consideration both adc_r1 and dac_r1 for clock division selection
2017-01-13 13:56:04 +02:00
f003b5b35a
fmcjesdadc1: Reduce SYSREF period
2017-01-12 16:10:45 +02:00
e77428c50e
fmcomms2: Added FIFOs for DAC and ADC paths so that the path works at l_clk / 2 or l_clk /4
...
- removed ILA
2017-01-11 18:12:35 +02:00
37d54bb984
fmcjesdadc1/a5gt- max delay fit only
2017-01-04 16:04:19 -05:00
8b74e911b8
fmcjesdadc1/a5gt- qr to ddio max delay
2017-01-04 14:10:44 -05:00
e4e5b30ade
fmcadc5: Integrate ad_sysref_gen into the project
2017-01-03 13:52:39 +02:00
14ded4f123
fmcjeadadc1/a5soc- ad_sysref_gen updates
2016-12-22 15:59:45 -05:00
b089173b4c
fmcjesdadc1/a5soc- cpu clock is 50m for a5gt also
2016-12-22 14:14:21 -05:00
aa6c94c993
usdrx1/a5gt: ddr3 use ip constraints
2016-12-22 14:14:21 -05:00
18660c7ab4
fmcjesdadc1/a5gt: ddr3 use ip constraints
2016-12-22 14:14:21 -05:00
2bea337aa2
fmcjesdadc1/a5gt- use 50m-mem-cpu-clk
2016-12-22 14:14:21 -05:00
5d683943ab
fmcjesdadc1/a5gt- remove ad-sysref-gen-pack
2016-12-22 14:14:21 -05:00
f1168f9e29
fmcjesdadc1/a5gt- use xilinx setup 2-dma
2016-12-22 14:14:21 -05:00
1ceec2e2a9
projects/a5gt- use 50m afi clock for cpu- xcvr reconfig timing
2016-12-22 14:14:21 -05:00
eba30b0cde
projects/altera- qii_auto_pack option
2016-12-22 14:14:21 -05:00
4a783d523d
projects/altera* - default & common qsys commands
2016-12-20 16:27:44 -05:00
3e57ff1fc5
z-mpsoc- map 0x4-0x8,0x7-0x9
2016-12-20 16:14:38 -05:00
1156aeac16
ad_sysref_gen: Update SYSREF related constraints
2016-12-19 18:07:05 +02:00
da7f4608a8
fmcjesdadc1/usdrx1: Clean up the mess
...
Delete accidentally commited generated files.
2016-12-19 15:35:20 +00:00
f47863bbcf
usdrx1: Integrate ad_syref_gen into the project
2016-12-19 14:36:01 +00:00
8d799d0316
fmcjesdadc1: Intergrate ad_sysref_gen into project
2016-12-19 13:37:29 +00:00
0c42e04bc3
fmcadc2: Integrate ad_sysref_gen into the project
2016-12-19 12:16:05 +00:00
67390c2a95
ad6676evb: Update projects with ad_sysref_gen
2016-12-19 10:52:25 +00:00
8879218502
a5gte: Fixed timing violations
2016-12-16 15:37:51 +02:00
c0b0f9b7e9
ad6676evb: Connect SYS_REF to GPIO
2016-12-14 17:55:50 +02:00
557efed5d9
ad6676evb: Update clock constraints
2016-12-14 17:55:49 +02:00
3a2c889115
ad6676evb: Update GT configuration
2016-12-14 17:55:49 +02:00
d962614000
usdrx1/zc706: Disabele axi_spi constraint file
...
The interface ports of the AXI SPI IP are not connected
directly to a IOBUF, this results in a CRITICAL WARNING
2016-12-13 19:23:51 +02:00
d5165ca81f
motcon_fmc: Tie unused pins to GND
2016-12-13 19:20:13 +02:00
1515b6f1af
fmcomms7/zc706: Disabele axi_spi constraint file
...
The interface ports of the AXI SPI IP are not connected
directly to a IOBUF, this results in a CRITICAL WARNING
2016-12-13 19:18:18 +02:00
8846141467
fmcomms1/kc705: Disabele axi_spi constraint file
...
The interface ports of the AXI SPI IP are not connected
directly to a IOBUF, this results in a CRITICAL WARNING
2016-12-13 19:16:31 +02:00
c455d2d64f
fmcadc2/vc707: Disabele axi_spi constraint file
...
The interface ports of the AXI SPI IP are not connected
directly to a IOBUF, this results in a CRITICAL WARNING
2016-12-13 19:15:44 +02:00
8ebc8fe4e2
updated makefiles
2016-12-09 23:06:41 +02:00
06aab8ebbd
pzsdr1: Set the device core to 1R1T mode
2016-12-09 16:35:46 +02:00
8e69c838e1
common/ac701: Connect axi_ddr_cntrl/device_temp_i to GND
2016-12-09 13:54:39 +02:00
23c91ca48a
pzsdr1/lvds: The interface runs at max 122.88 MHz
2016-12-09 11:45:11 +02:00
f799c40cf0
usdrx1/a5gt- xcvr interface changes
2016-12-08 16:05:23 -05:00
c114888956
usdrx1- updates
2016-12-08 16:05:23 -05:00
b0eff57b0f
fmcomms2/zc702: Fix critical warnings
2016-12-08 19:54:52 +02:00
3dceb53984
fmcadc2/vc707: Fix timing violations
2016-12-08 19:51:18 +02:00
252c67ceff
fmcomms6: Delete project
...
This project will not be supported in further releases.
2016-12-08 17:22:41 +02:00
fb287d0178
kcu105- updates to match xilinx trd
2016-12-08 09:32:33 -05:00
3bc9df4c51
fmcomms5: Fixed the wornings created by TDD missing connections to axi_ad9361 core
2016-12-07 21:43:19 +02:00
8eaae98728
fmcadc2: Updates
2016-12-07 21:43:19 +02:00
801da3cb25
daq3/kcu105- fix timing violations
2016-12-06 12:31:40 -05:00
2d7fb03b93
adrv9371x/a10gx- fix os xcvr parameters
2016-12-06 12:31:40 -05:00
ad96c5e881
daq3/zc706: Change the speed grade of the FPGA to 3
2016-12-06 15:24:23 +02:00
8f94103f8b
daq1/a10gx: Makefile fix
2016-12-06 15:24:23 +02:00
95ee7c093c
daq1/a10gx: Update system_bd port names
2016-12-06 15:24:23 +02:00
b7143a7a3b
daq1/a10gx: Update IO pin assignments
2016-12-06 15:24:22 +02:00
a415625069
daq1/a10gx: Add spi wrapper file to the project
2016-12-06 15:24:22 +02:00
e30a80fda0
daq1_spi: Delete device specific macro instantiation
2016-12-06 15:24:21 +02:00
7a8dc92b84
usb_fx3: Add interrupt monitor and increase ILA data depth
2016-12-06 11:55:28 +02:00
1e4bdea80c
usrpe31x: Fix Makefile
2016-12-06 11:07:42 +02:00
4b7bf422ee
pzsdr2/ccbox- remove imu intr on pl
2016-12-05 10:21:42 -05:00
351811e13f
pzsdrx/ccbox- imu intr on gpio
2016-12-05 10:18:40 -05:00
170c781d02
hdlmake.pl- updates
2016-12-01 13:52:11 -05:00
6e89ac3d65
pzsdr2: ccusb_lvds, add flag_a,flag_b signals
2016-11-30 17:39:02 +02:00
0faa1ebff2
pzsdr1: ccusb_lvds, add flag_a,flag_b signals
2016-11-30 17:38:04 +02:00
84a76b9dea
imageon: Invert HDMI TX clock
...
The ADV7511 samples the parallel data bus at the rising edge of sample
clock. Generate the clock so that the falling edge is aligned to updating
the bus data. This creates larger timing margins on each side of the
sampling edge and makes the design more robust.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 15:43:24 +01:00
24cc8d284b
imageon: Increase RX DMA FIFO size
...
Increase the RX DMA FIFO to be able to better compensate for momentarily
memory bus contention. This has shown to resolve occasional overflows that
would occur under high system memory load.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 14:12:39 +01:00
99dae73d96
imageon: Connect hdmi_rx_core output clock to DMA
...
Connect the HDMI RX core output clock to the DMA rather than connecting the
HDMI RX input clock directly. This will allow the HDMI RX core to modify
the clock and e.g. insert clock buffers or similar.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 14:12:39 +01:00
07217740b5
imageon: Increase HDMI RX clock constraint
...
The ADV7611 is rated for a maximum clock rate of 165MHz. Increase the clock rate constraint to match this.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 14:12:39 +01:00
284fbac571
usdrx1: Xcvr updates, so that the channel parameters are correctly configured from boot time
2016-11-28 14:16:07 +02:00
45fd4f806d
fmcjesdadc1: Fixed RX_PMA_CFG parameter
2016-11-25 16:33:58 +02:00
11b57290f1
fmcadc5- replaced with axi_adxcvr
2016-11-23 16:22:05 -05:00
22e230618c
scripts/adi_board.tcl- support multiple xcvrs
2016-11-23 16:22:05 -05:00
862bd7ef2c
daq3/zc706- xcvr changes
2016-11-23 15:02:20 -05:00
4e3e623530
pzsdr2/ccpci- updates
2016-11-23 14:02:59 -05:00
e5d3bae54d
projects/ad6676-adrv9371: xcvr updates
2016-11-23 11:06:22 -05:00
daa3df4b96
projects/- xcvr updates
2016-11-22 16:23:05 -05:00
8f562fd069
xcvr updates- board procedure
2016-11-22 14:43:36 -05:00
b1a9bd96f1
daq2: xcvr pll changes
2016-11-22 12:53:29 -05:00
750b23621b
board-tcl: xcvr qpll/cpll changes
2016-11-22 12:53:02 -05:00
4ed7469286
fmcadc4/zc706- updates
2016-11-22 10:32:05 -05:00
8c4279f618
pzsdr1: Added ccusb_lvds initial project
2016-11-22 16:58:34 +02:00
3d0049d274
pzsdr2: ccusb_lvdsr, updated project for the latest schematic
2016-11-22 16:55:52 +02:00
aff45eae5f
fmcadc2: xcvr updates
2016-11-21 18:45:38 +02:00
69ee410d3d
fmcomms2/zc706pr- bypass pr as default
2016-11-21 09:45:10 -05:00
4739d05269
zc706pr/common- removed
2016-11-18 14:52:39 -05:00
f43248c2bc
common/pzsdr*- removed
2016-11-18 11:32:43 -05:00
0d75bcb606
pzsdr2: ccbox: Use DMA interface 0+1 for audio
...
There is a bug in the ps7 component specification that causes critical
warnings to appear in the build log if DMA interface 0 is disabled, but any
other DMA interface is enabled.
Work around this issue by using DMA interface 0 and 1 instead of 1 and 2
for the I2S DMA.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-18 14:03:46 +01:00
b62f60b0da
pzsdr1/ccbox- updates
2016-11-17 16:14:28 -05:00
935f8a5c7b
pzsdr1/ccbox- constraints
2016-11-17 16:13:53 -05:00
4f65bcb3b2
pzsdr1/ccbrk_cmos- updates
2016-11-17 15:32:49 -05:00
e85dd2740a
pzsdr1/ccbrk_lvds- updates
2016-11-17 15:32:25 -05:00
a61da1d2ac
pzsdr1/common- updates
2016-11-17 15:31:25 -05:00
aa02ca875f
pzsdr1- common files
2016-11-17 13:40:25 -05:00
8c25402d53
pzsdr1- common files
2016-11-17 13:40:04 -05:00
4dae754287
pzsdr1- added readme
2016-11-17 11:29:01 -05:00
778638a7a1
pzsdr2- make updates
2016-11-17 10:26:45 -05:00
74bf4dfb80
pzsdr2- gpio- turn-around
2016-11-17 10:24:50 -05:00
d0166a4c7e
ccbox- updates
2016-11-17 10:24:11 -05:00
c2b7cbd61b
ccbox- constraints
2016-11-17 10:23:51 -05:00
5e6b931150
ccbox- added
2016-11-17 09:28:33 -05:00
fb5d36b250
pzsdr2- update ccfmc
2016-11-16 16:27:41 -05:00
95c44b687e
pzsdr2- fmc/pci constraints
2016-11-16 16:27:41 -05:00
11347c49be
fmcomms11- device set to -3
2016-11-16 13:43:07 -05:00
b85a282748
fmcomms11- lane swap
2016-11-16 10:26:47 -05:00
bdd14c3874
README: Delete second rule under headers
...
By default there is a rule under each header, no need for another one.
2016-11-16 11:04:43 +02:00
81e47edcd5
README: Set links for documentation
2016-11-16 10:57:39 +02:00
fabbe4981e
Update README.md
...
updated
2016-11-15 16:15:55 -05:00
538a1c977f
pzsdr2: make files
2016-11-15 16:00:55 -05:00
4905e80df8
Update README.md
...
updated
2016-11-15 14:16:46 -05:00
db243df97e
pzsdr2- updates
2016-11-15 14:16:06 -05:00
0897716167
fmcadc4: xcvr updates
2016-11-15 16:03:52 +02:00
cac4057449
daq2/common: Altera updates
2016-11-15 16:03:52 +02:00
cfd3ea61f1
pzsdr-to-pzsdr2
2016-11-14 14:12:22 -05:00
f64b44c8ac
sdrstk2pluto- contents
2016-11-11 13:52:57 -05:00
2ececad58c
sdrstk-2-pluto
2016-11-11 13:49:04 -05:00
c80033cb1b
util_fir_int: removed s_axis_data_tvalid and updated sdrstk
2016-11-11 17:52:19 +02:00
e62fe0c086
fmcjesdadc1- a5gt/a5soc- sysclk is different
2016-11-11 10:34:18 -05:00
7008c641b5
axi_adrv9371/zc706: Constraints update
...
From source *jesd_rstgen* is a false path for TX and RX_OS too.
2016-11-11 10:35:09 +02:00
85eac8c811
fmcjesdadc1/a5*- updates
2016-11-10 16:57:06 -05:00
959055bd54
common/a5gt- updates
2016-11-10 16:56:35 -05:00
7a2c713a4e
fmcjesdadc1/a5* - hdlmake.pl
2016-11-10 11:37:06 -05:00
c6730ab2d7
fmcjesdadc1/a5gt- updates
2016-11-10 11:36:41 -05:00
c207589f4b
fmcjesdadc1/a5gt - qsys2tcl flow
2016-11-10 11:32:29 -05:00
8af0731bb0
a5gt- qsys2tcl flow
2016-11-10 11:30:18 -05:00
7a606cbae1
sdrstk: Maximum clock frequency is 61.44 in CMOS mode
2016-11-10 17:45:35 +02:00
d29ef14f36
sdrstk: Configured ad9361 in 1r1t mode
2016-11-10 17:06:42 +02:00
a54092c9bb
fmcjesdadc1: Update projects to xcvr framework
...
This commit contains modifications for Xilinx only
2016-11-10 10:59:52 +02:00
d6918de19e
ad6676: Update projects to xcvr frame work
2016-11-10 10:39:46 +02:00
3cc416ca60
pzsdr1- fix typo on system_ps7
2016-11-09 12:04:30 -05:00
35c2dd5d6d
adrv9371x/zc706: Fix constraints
2016-11-09 16:34:08 +02:00
0b58a2a1db
avl_adxcvr- sysclk frequency
2016-11-09 09:21:07 -05:00
aef3e87d7e
fmcjesdadc1/a5soc -- xcvr frame work updates
2016-11-08 15:20:48 -05:00
53c2f0642b
fmcjesdadc1/a5soc -- xcvr frame work updates
2016-11-08 15:20:33 -05:00
f0af8216ce
common/a5soc- device can not run at 100M cpu clock
2016-11-08 15:19:23 -05:00
d9cfccc05f
common/a5soc- gpio in/out separation
2016-11-08 15:19:02 -05:00
acb9bf3902
hdlmake- a5soc/a5gt- updates
2016-11-04 15:02:57 -04:00
6b492b79db
a10soc - remove default assignments
2016-11-04 15:01:19 -04:00
8ea9beffaf
fmcjesdadc1- a5soc tcl updates
2016-11-04 15:01:19 -04:00
4e99c3be9a
a5soc- tcl flow updates
2016-11-04 15:01:19 -04:00
ce3b6a2d3f
adrv9371x: Updated constraints for altera projects
2016-11-04 18:20:46 +02:00
0dfbb0af11
arradio/c5soc- constraints changes- interface 1r1t
2016-11-03 11:25:52 -04:00
128ca7719a
ccpci_lvds- rev.d. xcvr pin changes
2016-11-02 16:41:04 -04:00
1cbea90bac
altera - a10gx bank swap
2016-11-01 12:41:25 -04:00
1e0fed82f7
alt_serdes- a10 ddio fixes
2016-11-01 12:41:25 -04:00
671a547c2b
hdlmake- updates
2016-11-01 12:41:25 -04:00
d010f3e687
sdrstk: Update Makefile to remove pack/cpack dependancy and add util_fir_dec/util_fir_int dependancy
2016-10-28 16:13:52 +03:00
ac8a6124af
sdrstk: Added interpolation and decimation filters. Removed cpack/upack
2016-10-27 19:33:28 +03:00
50552ce7d6
adrv9371x- altera updates
2016-10-27 09:25:00 -04:00
f752f0c9d7
a10soc- xcvr updates
2016-10-27 09:25:00 -04:00
d4c7b7ca57
ccusb_lvds: Fixed IIC constraints
2016-10-26 11:12:02 +03:00
6607aa707d
pzsdr1: Renamed projects to have lvds/cmos sufix
2016-10-26 11:09:43 +03:00
9ff92fdf5b
pzsdr: Renamed projects to have lvds/cmos sufix
2016-10-26 11:07:29 +03:00
b8363d778d
arradio: Makefile update
2016-10-25 20:36:56 +03:00
138eeebc9b
ccusb_lvds: Initial commit
2016-10-25 16:32:44 +03:00
5731ba3300
fmcomms11- xcvr updates
2016-10-24 09:51:40 -04:00
7e57a89ce5
daq1: Add support for A10GX
2016-10-24 11:43:33 +03:00
c9ac870086
usrpe31x- updates
2016-10-21 13:59:43 -04:00
7b958fed87
hdlmake- updates
2016-10-21 13:59:43 -04:00
48e90f0e9b
usrpe31x- added
2016-10-21 13:59:43 -04:00
801f980aeb
adrv9371: Fix parameter name
2016-10-21 12:50:20 +03:00
3abd87631a
fmcomms11: Fix parameter name
2016-10-21 12:49:48 +03:00
7db0c03a92
pzsdr1+ccbox -- updates
2016-10-19 10:32:28 -04:00
c1b7c5e77a
usb_fx3: Added FIFO on the FX3 to Zynq path, between FX3 core and DMA core
2016-10-19 09:30:51 +03:00
17cfdd6be9
fmcomms2/a10gx: Update Makefile and qsys script
2016-10-18 12:42:14 +03:00
918ce45e2a
pzsdr1/ccbox- updates
2016-10-17 16:29:57 -04:00
cb97bc500a
hdlmake updates
2016-10-17 16:29:57 -04:00
950acaed15
ccbox- copy
2016-10-17 16:29:57 -04:00
7c541c704a
usdrx1: ZC706, Update project to the new GT framework
2016-10-14 18:08:08 +03:00
1d1fe26624
fmcomms7: ZC706, Update project to new GT framework
2016-10-14 17:32:23 +03:00
5bb77109ca
daq2/a10gx- make fix
2016-10-10 13:03:44 -04:00
905e29eb01
hdlmake- altera
2016-10-10 12:55:55 -04:00
e5cf417576
daq2/mb- xcvr procedures
2016-10-10 12:51:30 -04:00
273073a584
daq2/kcu105- xcvr procedure
2016-10-10 11:12:47 -04:00
b3d3876dc5
imageon: ZC706, updated system_top to remove part of the Warnings.
...
- constraints fixed so Vivado doesn't issue a Warning
2016-10-10 17:33:42 +03:00
9efc45f0b6
imageon: Zed, updated system_top to remove part of the Warnings.
...
- spi csn signals should be tied to 1 if spi is not used
- constraints fixed so Vivado doesn't issue a Warning
2016-10-10 17:31:25 +03:00
8875c5bef3
fmcomms6: ZC706, updated system_top to remove part of the Warnings
2016-10-10 16:43:23 +03:00
fcd56a2f90
daq3/a10gx: Update project to the new GT framework
...
- Update common script
- Update system_top, some port names were changed
- Update constraint files
2016-10-10 16:22:08 +03:00
94f55f20e9
adv7511: KCU105, updated system_top to remove part of the Warnings
2016-10-10 16:12:17 +03:00
f464497062
cn0363: Microzed, updated system_top to remove part of the Warnings
2016-10-10 16:08:59 +03:00
2e605fc060
cn0363: Zed, update system_top to remove part of the Warnings
2016-10-10 15:56:46 +03:00
a12d34a98b
adv7511: Zed, updated system_top to remove part of the Warnings
2016-10-10 15:54:34 +03:00
c737afebf8
adv7511: KC705, updated system_top to remove part of the Warnings
2016-10-10 13:24:40 +03:00
74faac9210
ad9467_fmc: KC705, updated system_top to remove part of the Warnings
2016-10-10 13:19:55 +03:00
ffaf78665f
daq2- xcvr procedures
2016-10-06 14:44:20 -04:00
3b55822db3
daq2- xcvr connect
2016-10-06 14:09:27 -04:00
721ee98a06
zcu102- misc fixes
2016-10-06 10:18:14 -04:00
8965bcffb7
make: Update make files for DAQ3
2016-10-06 10:27:00 +03:00
9ace02a227
daq3/a10gx: Update project to the new GT framework
2016-10-06 10:25:25 +03:00
58c4abd8af
daq3/kcu105: Update project to the new GT framework
2016-10-06 10:23:52 +03:00
ca4dca87e2
daq2- updates
2016-10-05 14:02:59 -04:00
baabe20766
common/zcu102- spi connections & clock
2016-10-05 14:01:59 -04:00
bab9b2df0b
daq3/zc706: Update project with the new transceiver modules
2016-10-05 17:41:25 +03:00
c196b5bf68
ad6676evb: VC707, fixed system top gpio_bd datawidth
2016-10-05 15:50:43 +03:00
0208335ef3
hdlmake- updates
2016-09-30 13:20:22 -04:00
27c9bdddb6
daq2/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
8e1034946f
fmcomms2/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
9afff7ae60
common/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
33f9ed33c7
projects- ultrascale+
2016-09-30 11:55:10 -04:00
0ded52d8f6
daq2/zcu102- kcu105 copy
2016-09-30 11:55:10 -04:00
7290bcc81a
hdlmake- updates
2016-09-29 11:50:58 -04:00
4950c6c773
adrv9371x - xcvr updates
2016-09-29 11:50:58 -04:00
4a5b7fc723
scripts- reconnect added
2016-09-29 11:50:58 -04:00
e40311eee9
adrv9371x: A10soc, connected DMAs through 128 bit SDRAM0 port at 175MHz
2016-09-29 09:14:37 +01:00
4239f64125
dacfifo- board pin warnings
2016-09-27 14:49:20 -04:00
751a66eb72
plddr3/zc706- board pin warning
2016-09-26 15:20:37 -04:00
79b9e21be8
board- xcvr procedure
2016-09-26 15:20:18 -04:00
8314efd4e9
fmcomms11- xcvr updates
2016-09-26 15:19:29 -04:00
7fd9280cbf
fmcomms11- xcvr updates
2016-09-26 15:19:05 -04:00
f5809b8817
adrv9371x: a10soc, added adcfifos; connected the new reset to all peripherals; used the new f2sdram1 port
2016-09-24 10:09:05 +03:00
2d307d5f58
a10soc: Added system reset bridge. Using F2SDRAM port used in the previous Qsys design
2016-09-24 10:06:35 +03:00
df37a23a48
pzsdr/ccfmc- rgmii critical warnings fix
2016-09-22 11:38:43 -04:00
dc6f7bbc4e
pzsdr/ccfmc - loopback updates
2016-09-22 11:18:13 -04:00
0e2572bbd8
pzsdr- ccbrk_cmos- loopback changes
2016-09-21 13:16:04 -04:00
14ad1ea741
pzsdr- swap clear-up
2016-09-21 13:15:40 -04:00
21b5e9c634
hdlmake- updates
2016-09-21 11:56:03 -04:00
143423e3b9
adrv9371x: A10SOC, fix Makefile and system scripts to be compatible with altera
2016-09-21 18:13:02 +03:00
500d8bfb90
adrv9371x: A10GX, fix makefile and system_qsys.tcl script
2016-09-21 18:11:35 +03:00
79f34c9de7
ccbrk- test updates
2016-09-21 11:04:22 -04:00
a2e60cf693
ccbrk - test
2016-09-21 11:04:22 -04:00
3ca9fe0919
sdrstk- remove critical warnings from ps7
2016-09-16 14:06:12 -04:00
f1e787f86b
fmcomms2: TDD control is enabled by default
2016-09-16 14:45:39 +03:00
2a7bc31c01
pzsdr1- disable gpreg constraints
2016-09-15 13:49:04 -04:00
67d4e71ff0
pzsdr1- disable gpreg constraints
2016-09-15 12:41:40 -04:00
16ee1336c3
Makefile: Update make files
2016-09-15 11:41:06 +03:00
631923e9f0
usb_fx3: Update to Vivado 2016.2
2016-09-14 15:41:27 +03:00
9118ca3986
version_upgrade: Update MOTCON2 to 2016.2
2016-09-14 10:58:06 +03:00
cf9ac730a8
pzsdr1- new rev. board delays
2016-09-13 10:32:13 -04:00
9a2d2e8a02
version_upgrade: Update FMCADC4 to 2016.2
2016-09-13 15:04:11 +03:00
236a938425
daq2/a10gx- qsys updates
2016-09-12 14:57:50 -04:00
5df30ac6b0
daq2/a10gx- xcvr sharing
2016-09-12 14:57:50 -04:00
521c41ce32
adrv9371x: Updated a10soc project. Common design differentiates between nios and a10soc carrier
2016-09-08 11:44:45 +03:00
40c9fc92c1
a10soc: Switched to tcl flow
2016-09-08 11:31:06 +03:00
0d095f5da9
a10gx: Added system_type variable in common design
2016-09-08 11:29:14 +03:00
bae63ae5b1
version_upgrade: Update the DAQ3 project to 2016.2
2016-09-06 11:41:37 +03:00
b8c34791d5
version_upgrade: fmcjesdadc1 updated to 2016.2
...
Xilinx IP core JESD204 is updated to version 7.0
2016-09-06 11:41:37 +03:00
b837883b98
pzsdr1/pzsdr1/pzsdr1_cmos_system_constr: Fixed voltage level selection
2016-09-01 17:16:59 +03:00
93fa5aeec3
fmcadc2/vc707: Add adf4355 access, update design to Vivado 2016.2
2016-09-01 16:11:39 +03:00
dc21384002
pzsdr: Update ccpci base design
2016-09-01 09:06:30 +03:00
2f9ac4a342
altera- qsys-script does not support most tcl commands
2016-08-30 11:50:36 -04:00
917da79da1
altera- source defaults for qsys-script
2016-08-30 11:50:36 -04:00
8192e755e1
altera- defaults
2016-08-30 11:50:36 -04:00
1eccf5af07
fmcomms7: Update common design to Vivado 2016.2
2016-08-30 16:46:15 +03:00
2015bcedaa
fmcadc2: Update common design to Vivado 2016.2
2016-08-30 16:42:58 +03:00
6f0d124861
fmcadc5: Update to Vivado 2016.2
2016-08-30 16:09:28 +03:00
4248b9373a
ad6676evb: Update to Vivado 2016.2
2016-08-30 16:08:07 +03:00
a6e6b3f96e
version_upgrade: Update fmcomms1 common design to Vivado 2016.2
2016-08-29 15:59:15 +03:00
2e59f377e1
version_upgrade: Update ac701, mitx045 and zed common design to Vivado 2016.2
2016-08-29 09:50:46 +03:00
271029768c
pzsdr/cmos - swap==1
2016-08-26 10:31:00 -04:00
d18f6aa816
adrv9371x: A10GX, added adcfifo
...
- connected dac dma to 133 MHz clock
- set explicit clock rate to xcvr reference clock bridge
2016-08-26 14:46:48 +03:00
5cc2ab37a5
version_upgrade: Common ZC702 get an upgrade to 2016.2
...
Xilinx IP Clock Wizard updated to version 5.3
2016-08-26 10:20:04 +03:00
cd0c981b50
projects/scripts: Fix to prevent a warning
...
In case of axi_interconnects, when just one slave and master interface is
active, the 'Interconnect Optimization Strategy' is disabled. So this
parameter should be set just if there is more than one slave interface.
2016-08-26 10:08:00 +03:00
6ab137a0e9
projects/scripts: Cosmetics
2016-08-26 10:07:08 +03:00
9dfcfe6146
version_upgrade: adv7511 common script to 2016.2
...
Xilinx IP Clock Wizard updated to version 5.3
2016-08-26 09:52:01 +03:00
264bde77ad
sdrstk- SWAP==1 option
2016-08-24 12:07:13 -04:00
3c6cfdc7b5
adrv9371x: A10GX, switched TX lanes
2016-08-24 18:06:14 +03:00
215edb11c6
adrv9371: A10GX, updated design
...
- disable reconfiguration for RX transceivers and enabled the reconfiguration for TX transceiver. They cannot be enabled at the same time at this point
- update FIFO SIZE to 16 for all DMAs
- updated memory connections to 256 bit and moved clock connection to 133 MHz, for all DMAs.
2016-08-23 18:25:48 +03:00
320f87d63b
sdrstk- fix spi/port connections
2016-08-22 16:52:43 -04:00
270f8a6bbe
adrv9371x: Updated project common
2016-08-22 16:58:21 +03:00
f1b834ab25
scripts: Update script so that all interconnects are optimized for performance
2016-08-22 16:56:02 +03:00
c6b065c349
zc706: Updated DDR3 dacfifo
2016-08-22 16:48:52 +03:00
f697490de6
hdlmake- updates
2016-08-19 15:59:41 -04:00
5c35012f54
sdrstk- updates
2016-08-19 15:59:13 -04:00
8582517712
sdrstk- updates
2016-08-19 15:56:48 -04:00
67bf8f8e78
scripts- fix path and device defaults and override
2016-08-19 15:56:07 -04:00
6ef9555909
sdrstk- added
2016-08-19 13:45:40 -04:00
41203d07e9
adrv9371x: A10GX, update SPI connection
2016-08-18 17:42:27 +03:00
03c83b59bf
adrv9371x/a10soc: Export axi_ad9371_s and xcvr_reconfig_avmm
2016-08-17 19:03:53 +03:00
5d0e08d92e
common/vc707- 2016.2 version
2016-08-17 10:36:19 -04:00
73413366bc
daq2/all - warnings fix
2016-08-17 10:36:00 -04:00
0b6fbf2208
daq2/vc707- 2016.2 updates
2016-08-17 10:34:06 -04:00
ce1fed1ce6
dmafifo- adc/dac split
2016-08-16 12:54:39 -04:00
0694a5015d
kc705- 2016.2 version
2016-08-16 12:54:39 -04:00
8311098384
daq2/kc705- adxcvr changes
2016-08-16 12:54:39 -04:00
8464816c82
dmafifo-split to adc/dac
2016-08-16 12:54:39 -04:00
eb55f600fb
adrv9371x: Initial commit
...
-need to fix dc filter module for AD9371 / altera
2016-08-16 15:50:46 +03:00
5c27ccd1fa
adrv9371x: Added common qsys tcl
2016-08-16 15:34:10 +03:00
4658686ae1
adrv9371x/a10soc: Misc changes for being able to run Linux
2016-08-16 11:56:25 +03:00
39c1c83d00
adrv9371x/a10soc: Fix spi_csn assignment
2016-08-12 10:07:11 +03:00
0b0aa8e6c0
Makefile: Add MMU option to altera makefiles
2016-08-11 17:46:54 +03:00
5d93e542ed
daq2-kcu105: 2016.2 updates
2016-08-11 10:00:41 -04:00
16ad0f4379
kcu105- 2016.2 update
2016-08-11 10:00:41 -04:00
285059aed0
kcu105: Don't use phy reset automation, as it's not supported for KCU105
2016-08-09 10:19:57 +03:00
452d4706d3
kcu105: Update base project to 2015.4.2
...
- change part to revision 1.1 of the board
2016-08-09 10:19:36 +03:00
c6f4def93d
altera- make mmu a make switch
2016-08-08 11:54:51 -04:00
0cd608a7e2
lib_refactoring: Update Make files
2016-08-08 16:38:38 +03:00
df36902713
lib_refactoring: Fix path of the IO macros
2016-08-08 15:07:19 +03:00
f784557895
lib_refactoring: IOBUF is a Xilinx macro, no need to use with Altera
2016-08-08 15:06:34 +03:00
8f61e11a70
pzsdr: ccpci: Add PCIe reset monitor
...
For reliable and correct operation it is vital that the FPGA is fully
configured and up and running before the PCIe host de-asserts the reset.
Add a small logic circuit that detects de-assertion of the reset signal
that can be used to verify that the reset de-assertion was seen by the
FPGA.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
91782989ad
pzsdr: ccpci: Set IO standard to LVCMOS33 for banks 12 and 13
...
The IO voltage for bank 12 and 13 is 3.3V on the PCIe carrier. Set the
IOSTANDARD of the pins on these banks accordingly.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
418217dd10
pzsdr: Remove LED and button signals from PCIe carrier
...
Only the FMC carrier and the breakout board do have push buttons and LEDs.
They are not present on the PCIe carrier. So move the constraints to a
separate file that can be included by the projects that need them and
remove all LED and button related signals from the PCIe project.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
3cff0fa7dc
pzsdr: ccpci: Use PL SPI and GPIO peripherals
...
To be able to access the GPIO pins and the SPI port through the PCIe bridge
we need to use the PL SPI and GPIO controllers rather than the PS
controllers. Adjust the sytem_top.v accordingly so that the PL peripherals
are connected to the external pins.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:29:42 +02:00
d60bce654c
Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools
2016-08-05 15:16:04 +03:00
e42b4ea378
hdlmake- updates
2016-08-04 13:28:25 -04:00
Rejeesh Kutty
Istvan Csomortani
Adrian Costina
Nick Pillitteri
AndreiGrozav
Lars-Peter Clausen
István Csomortáni
dbogdan