Iulia Moldovan
961ebe0cc2
projects: Update .v files according to guideline
...
Deleted lines after endmodule and consecutive empty lines.
Modified parentheses, extra spaces.
Fixed indentation.
Fixed parameters list to be each parameter on its line.
Signed-off-by: Iulia Moldovan <iulia.moldovan@analog.com>
2022-06-28 18:06:56 +03:00
Laszlo Nagy
171daab8f2
ad9081_fmca_ebz: a10soc: Update resistor change comment
...
A board rework is required so the clocks, chip selects or sync signal reach the part correctly. Without this the link will not come up.
2022-06-21 14:19:58 +03:00
Laszlo Nagy
bdd5686e95
ad9081_fmca_ebz/a10soc: Make second sync CMOS and GPIO controllable
2022-05-26 09:13:05 +03:00
Laszlo Nagy
a2da965391
ad9081_fmca_ebz/vck190: Make second sync CMOS and GPIO controllable
2022-05-26 09:13:05 +03:00
Laszlo Nagy
20b89ddd99
ad9081_fmca_ebz/vcu128: Make second sync CMOS and GPIO controllable
2022-05-26 09:13:05 +03:00
Laszlo Nagy
b3d231e569
ad9081_fmca_ebz/zc706: Make second sync CMOS and GPIO controllable
2022-05-26 09:13:05 +03:00
Laszlo Nagy
044017e0b9
ad9081_fmca_ebz/zcu102: Make second sync CMOS and GPIO controllable
2022-05-11 18:09:08 +03:00
Laszlo Nagy
97b92565b2
Makefile: Replace util_fifo2axi_bridge with util_hbm
2022-04-28 14:31:32 +03:00
Laszlo Nagy
fa168fafe0
ad9081_fmca_ebz:vcu128: Disable offload bypass
...
The internal bypass FIFO has poor timing performance,
when using HBM data can be passed always through the external memory
without storage length constraints, so no need for the internal bypass FIFO.
2022-04-28 14:31:32 +03:00
Laszlo Nagy
c57015f80e
ad9081_fmca_ebz/vcu128: Use HBM for data offload cores
2022-04-28 14:31:32 +03:00
Laszlo Nagy
dbadb9eb61
ad9081_fmca_ebz/common: Make data offload memory type selectable
...
Make the storage type over writable so it can be set specifically
to carriers.
Address width of external memory AXI master is calculated in the
interfacing core (util_hbm) so that parameters is removed.
2022-04-28 14:31:32 +03:00
David Winter
638491d502
projects: ad9081: Disable tdd_sync CDC sync of TDD controller
...
Signed-off-by: David Winter <david.winter@analog.com>
2022-04-20 10:54:53 +03:00
Laszlo Nagy
8df1d8eade
ad9081_fmca_ebz: Update parameter description
2022-03-11 13:16:22 +02:00
Laszlo Nagy
45dae0f3d3
ad9081_fmca_ebz/common: Connect sync at TPL level
...
Reset CPACK from ADC TPL so during armed capture clear the cpack to avoid
capturing old samples.
Reset UNPACK with TPL to clear upack during armed transfers to avoid
sending old data.
2022-02-07 19:14:01 +02:00
Dan Hotoleanu
77f3e5155b
ad9081_fmca_ebz: Fix signal length parameter
...
Corrected the length parameter for the rx_data input.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-12-08 14:29:48 +02:00
Laszlo Nagy
80b3fc2d0a
ad9081_fmca_ebz: versal: Remove unused GT reset input pin
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-11-22 16:18:29 +02:00
Laszlo Nagy
1ec0993d33
ad9081_fmca_ebz/vcu128: Remove ref clock replica
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-11-22 16:18:29 +02:00
Laszlo Nagy
e76f287e73
ad9081_fmca_ebz:vcu128: Initial version
...
* 4Txs / 4Rxs per MxFE
* Tx I/Q Rate: 250 MSPS
* Rx I/Q Rate: 250 MSPS
* DAC JESD204B: Mode 9, L=4, M=8, N=N'=16
* ADC JESD204B: Mode 10, L=4, M=8, N=N'=16
* DAC-Side JESD204B Lane Rate: 10Gbps
* ADC-Side JESD204B Lane Rate: 10Gbps
2021-11-19 18:08:16 +02:00
Laszlo Nagy
e00def31d0
ad9081_fmca_ebz: versal: Remove external gt_reset logic
2021-11-19 14:01:48 +02:00
Laszlo Nagy
0b9631f1f7
ad9081_fmca_ebz: versal: Rename nets
2021-11-19 14:01:48 +02:00
Laszlo Nagy
ca6248ba88
ad9081_fmca_ebz/common/versal_transceiver.tcl: Reset also PLL
2021-11-19 14:01:48 +02:00
Laszlo Nagy
731ed0a7a5
ad9081_fmca_ebz/vck190: Updated to hierarchical versal transceiver
...
Vivado cannot nest multiple block designs than two layers. This makes
replication of designs difficult.
Create a hierarchy around the Versal transceiver that includes also the
converters, this type of interface would match the util_adxcvr
interface.
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-11-19 14:01:48 +02:00
Laszlo Nagy
1d951cfbae
ad9081_fmca_ebz/vck190: Change default profile to 2 lanes
2021-11-19 14:01:48 +02:00
stefan.raus
adad6c930d
ad9081_fmca_ebz_qsys.tcl: Add RX_LANE_RATE and TX_LANE_RATE parameters
...
For ad9081/a10soc project, the RX_LANE_RATE and TX_LANE_RATE were computed
from SAMPLE_RATE. Remove SAMPLE_RATE and add RX_LANE_RATE and TX_LANE_RATE
as parameters. Update also computation examples from comments.
Signed-off-by: stefan.raus <stefan.raus@analog.com>
2021-11-12 13:04:57 +02:00
Robin Getz
63b6711cfa
start adding some doc to the ./projects directory
...
This adds a Readme.md to each project directory with pointers to project
documentation in the wiki, and the drivers (if they exist). This will
help with some autogenerated doc in the wiki, that is generated with the
innovatily named "wiki_summary.sh" shell script that parses through
these Readme.md files, and generates a summary table.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Iacob Liviu Mihai <liviu.iacob@analog.com>
2021-11-10 14:01:06 +02:00
Filip Gherman
9295218a64
projects/ad9081_fmca_ebz: Updated makefiles
2021-10-05 16:56:57 +03:00
Laszlo Nagy
51b643b978
Makefile: Fix misc makefiles from projects and library
2021-10-05 14:24:48 +03:00
Laszlo Nagy
3a1babe366
ad9081_fmca_ebz/vck190: Reset GT with HMC7044 lock
...
Reset transceiver with a pulse
2021-10-05 14:09:51 +03:00
Laszlo Nagy
2562aead32
ad9081_fmca_ebz/common: Drive Rx DMA system side with DMA clock
2021-10-05 14:09:51 +03:00
Laszlo Nagy
8d547f31e1
ad9081_fmca_ebz/vck190: Initial version
2021-10-05 14:09:51 +03:00
Laszlo Nagy
6c58a8d1ab
ad9081_fmca_ebz/common: Add Versal transceiver support
2021-10-05 14:09:51 +03:00
David Winter
edd2956d58
data_offload: Fix util_[cu]pack offset to TDD syncs
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-30 14:45:54 +03:00
David Winter
b9554a9a5a
ad9081_fmca_ebz: Integrate axi_tdd into zcu102 design
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-30 14:45:54 +03:00
Adrian Costina
591a23156b
Makefiles: Update header with the appropriate license
2021-09-16 16:50:53 +03:00
David Winter
e9e278c898
ad9081_fmca_ebz: Remove bypass gpio
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-08-06 11:55:24 +03:00
David Winter
2178191610
ad9081_fmca_ebz: Switch util_dacfifo to data_offload engine
...
Memory requirements are the same as with the dacfifo (1 MiB).
Signed-off-by: David Winter <david.winter@analog.com>
2021-08-06 11:55:24 +03:00
Laszlo Nagy
75b965e87f
ad9081_fmca_ebz/zcu102: Enable 204C modes
2021-06-10 09:53:43 +03:00
Laszlo Nagy
27465ce9c0
ad9081_fmca_ebz/zcu102: Fix spaces
2021-06-10 09:53:43 +03:00
Laszlo Nagy
0ad691a603
ad9081_fmca_ebz/zcu102: Differentiate parameters based on lane rate
2021-05-14 15:39:40 +03:00
Laszlo Nagy
8183599b51
ad9081_fmca_ebz/zcu102: Fix typo
2021-05-14 15:39:40 +03:00
Laszlo Nagy
cf7f45ffcc
ad9081_fmca_ebz: Fix for F=8
2021-05-14 15:39:40 +03:00
Laszlo Nagy
7b2ba41bdd
ad9081_fmca_ebz/vcu118: Adjust QPLL params and diff swing
...
This commit fixes the 16.5Gbps lane rate case where the link drops
after few seconds an initial successful link up happens.
A few seconds delayed calibration process can workaround this but with
having the differential drivers swing increased this is no longer
required.
2021-05-14 15:39:40 +03:00
Laszlo Nagy
0d9e38bdbe
ad9081_fmca_ebz: Update path to common block design
...
Use absolute paths so ad9082 wrapper project can include the
system_bd.tcl instead of duplicating code.
2021-05-14 15:39:40 +03:00
Laszlo Nagy
680d28476c
ad9081_fmca_ebz: Add LANE_RATE param to all projects
...
The block design expects a lane rate to be set in the system project.
2021-05-14 15:39:40 +03:00
Laszlo Nagy
bd6ec360e2
ad9081_fmca_ebz/vcu118: Set XCVR params for 204C link
...
Set XCVR parameter for 204C 24.75 Gbps with a dynamic range of 10Gbps..24.75Gpbs
Organize XCVR params based on lane rate
2021-05-14 15:39:40 +03:00
Laszlo Nagy
693c002668
ad9081_fmca_ebz/common/ad9081_fmca_ebz_bd: Add 204C support for XCVR
...
Remove Xilinx PHY and simplify project
2021-05-14 15:39:40 +03:00
Laszlo Nagy
d92f925b06
ad9081_fmca_ebz: Disable XBAR from DAC TPL
2021-05-14 15:39:40 +03:00
stefan.raus
4a772265a9
Update Quartus Prime version from 19.3.0 to 20.1.0
...
adi_project_intel.tcl: Change quartus version to 20.1.0.
library: Set qsys version so that IP instances won't require a specific version.
2021-03-08 11:29:33 +02:00
Laszlo Nagy
6b13b32f24
ad9081_fmca_ebz: Workaround DMA bug when bus size equals max burst size
2021-03-04 11:13:29 +02:00
Laszlo Nagy
0374a7c1ac
ad9081_fmca_ebz/vcu118: Added common 204C use cases as example
2021-02-05 15:24:15 +02:00