zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6,479 Commits
1 Branch
0 Tags
23 MiB
Commit Graph

13 Commits (940c3ccd35c802b011833e3ba2674d8e71cc9ff6)

Author SHA1 Message Date
Iulia Moldovan c9a7d4d927 Add copyright and license to .tcl, .ttcl files 
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
 2023-07-25 15:22:26 +03:00
Iulia Moldovan 1cac2d82e1 Add copyright and license to .xdc files 
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
 2023-07-25 11:03:02 +03:00
laurent-19 6b94259a52 projects/common: Add system_top _project templates 
Signed-off-by: laurent-19 <laurentiu.popa@analog.com>

projects/common: Correct code and modify according to guidelines

* Added spacing to ports declaration
* Corrected coding mistakes/misspelling
* Modified/added variables names
* Added seetings (intel) and removed specific optimization settings
* Added assignments to unassigned pins (gpios)

Signed-off-by: laurent-19 <laurentiu.popa@analog.com>

projects/common: Correct/Add missing wrapper ports and iobufs

* Added port in wrapper (mainly spi) according to base design file
* Added instances of iobufs where missing
* Corrected gpio assignments or added missing ones
* Corrected minor guidelines mistakes

Signed-off-by: laurent-19 <laurentiu.popa@analog.com>

ac701/system_top.v: Change top based on previous projects

 * Looked at fmcomms1, fmcomms2 from hdl_2016_r1 and datasheet

Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>

projects/common: Modify templates to build without errors

* Changed path for adi_env.tcl
* Moved adi_project command before assign intel
* Removed unnecessary spi signals
* Added spi ports with default logic
* a10soc: Removed pl-ddr signals and ports
* ac701: system_bd: Modified mdio interface
	 system_project: Added adi_board, adiobuf sourcing
	 system_top: Removed hdmi, i2c, fanpwm, spdif ports
		     according to base design
* c5soc: Added version settings
	 Removed unused gpios
* microzed: system_bd: Enabled RTS1 to use FCLK
	    system_top: Removed hdmi, i2c, unused gpios
* vc709: Separated input from ouput gpio, according to bd
	 Removed unnecessary ports

Signed-off-by: laurent-19 <laurentiu.popa@analog.com>

projects/common: Delete microzed vmk_es templates

* Removed hp0 interconnect from cora base design
* Added extra line to files de10nano

Signed-off-by: laurent-19 <laurentiu.popa@analog.com>
 2022-09-20 17:00:49 +03:00
Arpadi 0680e44330 system_id: deployed ip 2019-08-06 16:53:11 +03:00
Istvan Csomortani de510b45ab base: Add system_processor_rst for all the global clocks 2019-06-11 18:13:06 +03:00
Istvan Csomortani 20c714eccf common: Define three global clock nets 
For all the Xilinx base design, define three global clock nets, which
are saved in the following three global variable: $sys_cpu_clk, $sys_dma_clk
and $sys_iodelay_clk.

These clock nets are connected to different clock sources depending of
the FPGA architecture used on the carrier. In general the following
frequencies are used:

  - sys_cpu_clk     - 100MHz
  - sys_dma_clk     - 200MHz or 250Mhz
  - sys_iodelay_clk - 200MHz or 500Mhz
 2019-06-11 18:13:06 +03:00
AndreiGrozav ebae8bf8c1 Remove interrupts from system_top for all xilinx projects 
- remove interrupts from system_top
- for all suported carriers:
	- remove all interrupt bd pins
	- connect to GND all initial unconnected interrupt pins
- update ad_cpu_interrupt procedure to disconnect a interrupt from GND
before connectiong it to another pin.
 2018-08-10 10:10:58 +03:00
AndreiGrozav 256dd87dd2 common/microzed: Enable PS CLK1 = 200MHz 2017-09-25 15:16:58 +03:00
Istvan Csomortani c843a16797 microzed: Add a secondary 200 MHz clock for PS7 2017-08-18 10:14:21 +03:00
Lars-Peter Clausen d7e87a60a9 Remove executable flag from non-executable files 
All of these files are source code and are not executable standalone.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2017-07-28 17:56:07 +02:00
Adrian Costina 954037a716 microzed: ip automatic version update 2017-04-14 17:24:24 +03:00
Lars-Peter Clausen d2b26720e6 common: microzed: Add clock, reset and interrupt support 
In order for the base project to be usable by other projects it needs to
create the clock, reset and interrupt signals that are expected to exist.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2016-01-13 20:32:26 +01:00
Lars-Peter Clausen 426490c394 common: Rename uzed to microzed 
Everybody calls the MicroZed microzed in their projects. Don't deviate from
that to avoid potential confusion.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2016-01-13 20:18:57 +01:00