Commit Graph

19 Commits (91c87b8438af97096262875ad2fa9ed4cedcd916)

Author SHA1 Message Date
Lars-Peter Clausen ea84e93e1d axi_dmac: Correctly handle shutdown for the request splitter
We need to make sure to not prematurely de-assert the s_valid signal for the
request splitter when disabling the DMAC. Otherwise it is possible that
under certain conditions the DMAC is disabled with a partially accepted
request and when it is enabled again it will continue in an inconsistent
state which can lead to transfer corruption or pipeline stalls.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:04:31 +01:00
Lars-Peter Clausen f9628262aa axi_dmac: Add xfer_req signal to the streamin AXI source interface
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-29 18:15:54 +01:00
Lars-Peter Clausen c2ed80e8bb axi_dmac: Drive unused signals to 0
This silences a few warnings from the tools about undriven signals.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:49 +03:00
Lars-Peter Clausen aee95ebe96 axi_dmac: Fix dummy AXI a{r,w}len fields width
The dummy a{r,w}len fields should have the same width as the real a{w,r}len
fields in order to not break auto AXI bus version detection.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:43 +03:00
Rejeesh Kutty de33722470 up/constr: independent read/write and local constraints 2014-10-02 14:35:59 -04:00
Rejeesh Kutty 922bc6f03a fmcadc3: 16bit - but ignored 4 lsb(s) 2014-09-29 15:26:30 -04:00
Lars-Peter Clausen 36422f0454 axi_dmac: Remove Altera toplevel wrapper
We can remove the Altera toplevel wrapper if we switch the axi4 control bus
to axi4lite and add the few missing signals that are required by the Altera
interconnect to both the control and the data buses.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:28:14 +02:00
Lars-Peter Clausen 41cc92ef49 Remove BASEADDR/HIGHADDR parameters
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
Lars-Peter Clausen 8a2b29cdbe axi_damc: Add xfer_req to the FIFO source interface
The xfer_req signal will be high if DMA core the is expecting data.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-07-02 16:05:16 +02:00
Rejeesh Kutty fa998a406b dma: parameter fix 2014-04-24 15:50:16 -04:00
Lars-Peter Clausen dc7b3e085c axi_dmac: Fix issues with non 64-bit AXI masters
Make sure that the address generator behaves correctly when the buswidth is not
64-bit. Also since the source and destination can have different widths add
separate parameters for source and destination address alignment.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 14:54:22 +02:00
Lars-Peter Clausen 090d3aee04 axi_dmac: Change C_DMA_LENGTH_WIDTH default to 24
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
Lars-Peter Clausen fa5ba6c09d axi_dmac: Make cyclic mode runtime configurable
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
Lars-Peter Clausen 9b4539b7c2 axi_dmac: Add option to configure the FIFO size
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-26 12:51:35 +01:00
Lars-Peter Clausen ca7a70650d axi_dmac: Delay up_ack by one clock cycle
The read data also becomes available only with a delay of one clock cycle,
sending the ack too early will result in bogus register reads.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-25 14:35:52 +01:00
Lars-Peter Clausen a230e6505a axi_dmac: Add option to configure AXI standard 2014-03-25 12:47:27 +01:00
Lars-Peter Clausen 522a222d3a axi_dmac: Fix default value for DMA type
Vivado doesn't handle the case where we use symbolic constants for the default
value properly, so update this to use plain integers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-17 13:20:49 +01:00
Lars-Peter Clausen f02ba999ae axi_dmac: Add support for DMA bus widths other than 64 bit
There were a few place in the core where it assumed a 64-bit wide bus. Make this
configurable using parameters. The patch also adds support for having different
DMA bus widths on the source and destination side.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-13 13:20:10 +01:00
Adrian Costina 831c19ea84 Added axi_dmac, axi_fifo and misc files in library 2014-03-06 18:16:02 +02:00