61c07ff9f1
util_axis_fifo: Add REMOVE_NULL_BEAT_EN feature
...
If the REMOVE_NULL_BEAT_EN is set, in FIFO mode, all the beats with a
NULL TKEEP will be removed from the AXI stream.
This feature is used initially in data_offload, to create a continues and
cyclic TX data stream for DACs, when the IPs in the path have different data
widths.
2021-03-08 11:32:40 +02:00
9611be9ded
util_axis_fifo: Add TKEEP support
2021-03-08 11:32:40 +02:00
0d3d099beb
util_axis_fifo: Fix FIFO is full alignment
2021-03-08 11:32:40 +02:00
8ce1d6bf36
util_axis_fifo: Switch data and tlast order, improve maintainability
2021-03-08 11:32:40 +02:00
4a772265a9
Update Quartus Prime version from 19.3.0 to 20.1.0
...
adi_project_intel.tcl: Change quartus version to 20.1.0.
library: Set qsys version so that IP instances won't require a specific version.
2021-03-08 11:29:33 +02:00
e2a111d74b
jesd204/ad_ip_jesd204_tpl_dac: Drop LSBs from wider bus to be compatible with previous implementations
...
Add selectable synthesis option for dropping LSBs or MSBs
2021-03-08 10:46:52 +02:00
69bb9df515
jesd204_rx: Set ASYNC_REG attribute for double syncs
2021-03-08 10:46:52 +02:00
8d388dd4f2
jesd204_rx:jesd204_rx_ctrl_64b: Improve timing closure
2021-03-08 10:46:52 +02:00
c2f703f56b
jesd204/jesd204_rx: Make output pipeline stages opt in feature
2021-03-08 10:46:52 +02:00
fd714c181a
jesd204/ad_ip_jesd204_tpl_adc: Make frame alignment opt-in feature
2021-03-08 10:46:52 +02:00
0db7519c18
jesd204_tx:64b: Remove reset
...
Remove synchronous reset from datapath to reduce fanout on reset and
help timing closure.
2021-03-08 10:46:52 +02:00
2545e53b0b
jesd204_rx:64b: Remove reset
...
Remove synchronous reset from datapath to reduce fanout on reset and
help timing closure.
2021-03-08 10:46:52 +02:00
7b4fa390db
ad_ip_jesd204_tpl_dac: fix capability reg
2021-03-08 10:46:52 +02:00
1099badaf4
ad9082_fmca_ebz:zc706: Initial version
2021-03-05 15:54:23 +02:00
2213527f29
ad9082_fmca_ebz:zcu102: Initial version
2021-03-05 15:54:23 +02:00
f56e3c305b
ad9082_fmca_ebz:vcu118: Initial version
2021-03-05 15:54:23 +02:00
6b13b32f24
ad9081_fmca_ebz: Workaround DMA bug when bus size equals max burst size
2021-03-04 11:13:29 +02:00
85729def2a
axi_adrv9001: Double sync control lines between interface 1 and 2
2021-03-04 11:13:10 +02:00
c691b5b0af
axi_ad9361: Update constraints in case TDD is disabled
2021-03-04 11:13:10 +02:00
677c154134
adrv9001/zcu102/cmos: Loosen up clock skew constraints to match LVDS settings
...
Set the same inter clock skew characteristics as used in LVDS mode. The
physical lanes/routes are common on both modes.
2021-03-04 11:13:10 +02:00
03de08609b
fmcomms2/zed: Disable unused TDD to save space and timing
2021-03-04 11:13:10 +02:00
50c4c3e815
axi_adrv9001: Fix channel 3 for Tx1 in DMA mode
2021-03-04 11:13:10 +02:00
3aa8a631d0
axi_adrv9001: Quartus 19.3 updates
2021-03-04 11:13:10 +02:00
0dd3173547
adrv9001/zc706: Initial commit
...
The project supports CMOS interface only.
VADJ on the ZC706 must be programmed to 1.8V
Instructions can be found here:
https://www.xilinx.com/Attachment/ZC706_Power_Controllers_Reprogramming_Steps.pdf
https://forums.xilinx.com/t5/Xilinx-Evaluation-Boards/ZC706-Doesn-t-work-with-VADJ-at-1-8v/td-p/430086
2021-03-03 09:03:03 +02:00
4c0f9a65f1
axi_dmac: fix non-blocking assignment in combinatorial block
...
Non-blocking assignments in combinatorial blocks can cause simulation problems. In this particular case iverilog coughed up a hairball.
2021-03-01 09:21:59 +02:00
bfd4c77284
jesd204/jesd204_tx: Expose character replacement capability
2021-02-26 14:41:49 +02:00
3be5137aec
cn0540/cora: Remove multicycle constraint
...
Design uses 80MHz spi_clk which does not require
special considerations
2021-02-18 14:14:16 +02:00
77ef04201a
util_axis_fifo: Add almost empty and almost full support
2021-02-16 15:12:16 +02:00
6178b42ba2
library.mk: Update CLEAN_TARGET
2021-02-16 15:11:53 +02:00
701e5f6515
scripts/adi_board.tcl: Add simulation support
...
This will allow building base test harnesses and place on top of them
existing block designs for simulation purposes.
Test harnesses will contain basic functionality like
- clock and reset generators
- AXI master to aid register access of the cores.
- memory model of the DDR
- interrupt controller
Existing procedures (ad_mem_hp0_interconnect, ad_cpu_interconnect, ... ) will
connect to this harness as they do to a real base design.
2021-02-12 16:21:10 +02:00
29d8c14e91
util_axis_fifo: Add TLAST to the streaming interfaces
2021-02-09 12:33:16 +02:00
b6fb5a9b5c
util_axis_fifo: Fix slave reset interface definition
2021-02-09 12:33:16 +02:00
0374a7c1ac
ad9081_fmca_ebz/vcu118: Added common 204C use cases as example
2021-02-05 15:24:15 +02:00
ddd8a14790
ad9081_fmca_ebz: Remove system reset from Xilinx PHY
...
Reset in device clock domain caused timing failures.
Since link reconfiguration is not supported the reset is not required.
2021-02-05 15:24:15 +02:00
af3e1c7003
ad9081_fmca_ebz/a10soc: Np 12 support
2021-02-05 15:24:15 +02:00
f73ed741c9
fmcadc5: Connect link clock to second JESD link layer
2021-02-05 15:24:15 +02:00
3f2f88ebbc
ad_fmclidar1_ebz: Set bits per sample towards the DMA interface
2021-02-05 15:24:15 +02:00
dafdd1c1e9
ad9208_dual_ebz: Use ad_xcvrcon procedure to connect device clock
2021-02-05 15:24:15 +02:00
bb9eafceef
ad9081_fmca_ebz/zcu102: Add case analysis to select correct out clock frequency
2021-02-05 15:24:15 +02:00
d0f8a81b2f
ad9081_fmca_ebz: Np 12 support
...
204B functional
204C functional
2021-02-05 15:24:15 +02:00
5678e72653
jesd204: Increase Rx version to 1.07.a
2021-02-05 15:24:15 +02:00
6f608b6199
jesd204: Increase Tx version to 1.06.a
2021-02-05 15:24:15 +02:00
dd58759cd8
jesd204: Intel: NP12 support
...
Dual clock mode is introduced in link layer to support different
datapath widths on the transport layer than on physical layer.
- Link clock : lane rate / 40 for input datapath width of 4 octets 8b10b
- Device clock : Link clock * input data path width / output datapath width
Supports four clock configurations, single or dual clock mode with or
without external device clock.
The configuration interface reflects the dual clock domain.
2021-02-05 15:24:15 +02:00
6fe6864447
intel/common/up_clock_mon_constr: Make constraint more generic
...
Support multiple clock monitors in a block.
Before this change the clock monitor had to be named with a fix name
preventing multiple instances of the clock monitor.
2021-02-05 15:24:15 +02:00
f04cb0c640
jesd204/ad_ip_jesd204_tpl:Intel: NP 12 support
...
Add parameter that describes interface to link layer, this must be
integer multiple of octets per frame.
Add parameter that describes interface to user/DMA, this must be
multiple of bytes so software can process the samples easier.
2021-02-05 15:24:15 +02:00
941411c17e
intel/jesd204_phy: Remove device clock from the interface
...
The device clock or other clock can be connected to link_clock from the
upper layer scripts, no need for duplicating clock inputs.
2021-02-05 15:24:15 +02:00
94181206c2
jesd204/tb: Update testbenches
2021-02-05 15:24:15 +02:00
589cfc6b1b
jesd204_tx_static_config: Update to Np 12 interface changes
2021-02-05 15:24:15 +02:00
93897b4cb5
jesd204_rx_static_config: Update to Np 12 interface changes
2021-02-05 15:24:15 +02:00
71475e7dd8
jesd204: Expose core synthesis parameters through registers
...
Make synthesis parameters accessible for the drivers.
Rework implementation to reflect the parameters of the actual core and
not of the AXI interfacing core.
2021-02-05 15:24:15 +02:00
Istvan Csomortani
stefan.raus
Laszlo Nagy
Aaron Holtzman
Sergiu Arpadi