Commit Graph

19 Commits (857ad45d579203ff883a3e31ceb4cd338f2aec88)

Author SHA1 Message Date
AndreiGrozav e4ae391237 axi adc cores: Add missing ports to up_adc_common instance 2017-05-12 13:39:05 +03:00
Rejeesh Kutty fea6eb68be up_adc_common- port name changes 2017-05-10 14:45:17 -04:00
Istvan Csomortani 1c23cf4621 all: Update verilog files to verilog-2001 2017-04-13 11:59:55 +03:00
Istvan Csomortani 913eafed48 up_drp : Update the DRP interface to support Altera platforms 2016-09-21 15:00:45 +03:00
Shrutika Redkar b8f4e1c0aa updated 9680 hdl files(to resolve a critical warning) 2016-08-10 14:50:31 -04:00
Adrian Costina aece3f5555 axi_ad9680: Update IP core
- added signals so that AD9680 can be connected to altera's xcvr core through an avalon streaming sink
- added DEVICE_TYPE parameter in _hw.tcl, set to 1 for altera
2016-08-01 15:05:30 +03:00
Rejeesh Kutty 5c91e41da8 ad9680- sof + sample delineation 2016-07-21 16:09:33 -04:00
István Csomortáni c865dbf353 axi_ad9680: Fix channel instantiation 2016-01-19 12:49:45 +02:00
Istvan Csomortani ebaebc54f7 axi_ad9680: Clock ratio is indicating a sampling clock ratio
The software can use this data to calculate the effective sampling clock, independent of the interface type.
2015-09-24 11:19:29 +03:00
Istvan Csomortani 57cfb7cfb1 hdl/library: Update the IP parameters
The following IP parameters were renamed:

PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
Lars-Peter Clausen 6862655b0d Add .gitattributes file
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
Rejeesh Kutty c6ebab7393 library- drp moved to up clock 2015-06-01 13:39:26 -04:00
Rejeesh Kutty 8d78217f7b ad9680: missing prot. ports 2015-05-21 14:06:08 -04:00
Rejeesh Kutty 4fb1be0672 ad9680: delay changes 2015-05-19 12:53:56 -04:00
Rejeesh Kutty a1d680ee6b ad9680- add hw tcl 2015-05-12 15:06:42 -04:00
Rejeesh Kutty de33722470 up/constr: independent read/write and local constraints 2014-10-02 14:35:59 -04:00
Lars-Peter Clausen 41cc92ef49 Remove BASEADDR/HIGHADDR parameters
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
Rejeesh Kutty e4ce00f7fb axi_ad9680: register map changes 2014-07-02 12:50:09 -04:00
Rejeesh Kutty 7efd6149f8 daq2: initial checkin 2014-06-12 15:54:25 -04:00