Commit Graph

612 Commits (816238bb6c1d5e9eba71fa89f765ac0e62b6ad0d)

Author SHA1 Message Date
Adrian Costina 43946a54a4 axi_dmac: Added C_FIFO_SIZE parameter 2015-07-24 15:30:10 +03:00
Adrian Costina 3d1ffe7bd2 util_cpack: Added reset interface 2015-07-23 17:01:53 +03:00
Adrian Costina f7d28e0944 axi_dmac: Removed unneded constraints, as FMCJESDADC1 doesn't work correctly with them 2015-07-23 17:01:02 +03:00
Adrian Costina 41e9a34886 axi_ad9250: Changed Altera interface specification to be compatible with upack 2015-07-23 16:59:57 +03:00
Adrian Costina c972779217 motcon2_fmc: updated util_gmii_to_rgmii and motcon2_fmc project for improved performance of the ethernet
- removed the delay controller from the top file and added it inside the util_gmii_to_rgmii core
- removed delay related xdc constraints as they are not needed
2015-07-08 16:23:33 +03:00
Adrian Costina 04527f8b18 axi_mc_current_monitor: updated ad7401 driver to send unsigned data 2015-07-02 14:21:26 +03:00
Lars-Peter Clausen 3c6d19d33d axi_hdmi_tx_es: Drop strange port initializers
Those were added by mistake. It does not seem to be legal Verilog, but for
some reason Vivado accepts it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-01 18:43:51 +02:00
Lars-Peter Clausen 26b0ff9853 axi_hdmi_tx: Don't accidentally send control characters in embedded sync mode
ffff and 0000 are always reserved control characters when using embedded
syncs. So make sure that we never have them in the pixel data, even when
running in full-range mode.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-01 18:43:51 +02:00
Lars-Peter Clausen 6aee17da83 axi_hdmi_tx: Add control to bypass chroma sub-sampler
Add a control bit to the register map that allows to bypass the chroma
sub-sampler in the axi_hdmi_tx core. This is primarily interned to be used
to send the test-pattern directly to the HDMI transmitter without modifying
it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-01 18:43:51 +02:00
Lars-Peter Clausen 35988b2dba axi_hdmi_rx: Fix packed 422 mode
Currently the hdmi_de_int signal is asserted one clock cycle too early in
packed 422 mode. As a result the EAV sequence ends up in the first pixel
and every other pixel is off by one.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-01 18:43:51 +02:00
Lars-Peter Clausen fa15f8d0b5 axi_hdmi_rx: Add full range support to the TPM
Check for both full range and limited range test-pattern sequences and only
if both don't match assert the tpm_oos signal.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-01 18:43:51 +02:00
Lars-Peter Clausen fcb841d3e5 axi_hdmi_rx: Move TPM to its own module
Move the test pattern matcher to its own module. This makes it easier to
use it in other configurations as well.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-01 18:43:51 +02:00
Lars-Peter Clausen ab6ea2c824 axi_hdmi_rx: Drop TPG enable from register map
The TPG is no longer part of the RX core and the corresponding bit in the
register map isn't hooked up to anything. So drop it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-01 18:43:51 +02:00
Lars-Peter Clausen a2a4f3402c up_hdmi_rx: Fix TPM OOS clear
The TPM OOS status flag is in bit 1. Make sure writing to bit 1 rather than
bit 0 clears the TPM OOS.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-01 18:43:51 +02:00
Lars-Peter Clausen c372064302 Add .gitattributes file
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-01 18:43:51 +02:00
Istvan Csomortani 4744fca18e axi_ad9361: Bring up the tdd_enable bit
This line will be the selection bit of the GPIO/TDD_FSM mux for ENABLE/TXNRX control
2015-07-01 14:59:32 +03:00
Adrian Costina caabb9444a axi_mc_speed: Removed unneded constraints 2015-06-29 16:53:39 +03:00
Adrian Costina fcc185d769 Makefile: Updated makefiles
- removed up_drp_control, up_delay_control dependencies where not needed
- added axi_jesd_gt core in the library makefile
- fixed timing tcl dependency for altera projects
2015-06-25 14:59:34 +03:00
Istvan Csomortani c9d976d4f7 axi_hdmi_rx: Fix alignment issue on packed formats
Some cases, when software changed the image formats, the packed formats (24bit/pixel) lost alignment.
(the first 32 bit after sof got lost) This commit fix that issue.
2015-06-24 12:47:15 +03:00
Istvan Csomortani 1abd1a46b1 axi_hdmi_rx: Fix synchronization issues 2015-06-24 12:47:02 +03:00
Adrian Costina c9e152e500 axi_ad9250: Updated altera core to work with axi4lite interface 2015-06-23 14:28:02 +03:00
Adrian Costina d6163bea5e axi_jesd_gt: Fixed constraints 2015-06-10 10:56:22 +03:00
Adrian Costina 5e4f572092 axi_ad9122: Fixed constraints 2015-06-10 10:56:03 +03:00
Istvan Csomortani 4b08df9ed6 ad9361/tdd: Fix generation of tx_valid_* signals
In FDD mode the tx_valid_* signals are generated inside the axi_ad9361_tx module, in function of
the selected dac data rate. In TDD mode, these signals are gated by the tdd_enable and tdd_tx_dp_en signals.
In other words, the tx_valid_* signals will be valid just when tdd_enable and tdd_tx_dp_en is active.
2015-06-08 16:23:32 +03:00
Istvan Csomortani 2e877389b2 ad9361_tdd: Some naming and hierarchical changes 2015-06-04 18:09:49 +03:00
Istvan Csomortani 3b1ea7e528 axi_ad9361/tdd: Cherry picked commit 598ece4 from hdl_2015_r1 branch
598ece4c8d
2015-06-04 18:09:47 +03:00
Rejeesh Kutty 6548bcd71f axi_ip- constraints: add rst path 2015-06-04 10:53:13 -04:00
Rejeesh Kutty e02273781f ad_rst- non lpm version 2015-06-04 10:53:12 -04:00
Rejeesh Kutty 91b0f70972 library: remove drp cntrl 2015-06-02 09:58:57 -04:00
Adrian Costina 2b5abf74d7 util_upack: Show upack_valid only if the channel is activated 2015-06-02 11:36:06 +03:00
Rejeesh Kutty 297e885981 library- drp moved to up-clock domain 2015-06-01 14:52:52 -04:00
Rejeesh Kutty e7470036bf library- drp moved to up clock 2015-06-01 13:39:26 -04:00
Rejeesh Kutty c6ebab7393 library- drp moved to up clock 2015-06-01 13:39:26 -04:00
Rejeesh Kutty aa24c442f5 a10gx- no-ddr 2015-06-01 11:00:01 -04:00
Rejeesh Kutty d7b68c39ef altera- sdc 2015-06-01 10:59:59 -04:00
Rejeesh Kutty 2a0bdbebf2 altera- sdc 2015-06-01 10:59:58 -04:00
Rejeesh Kutty 92fc0e050d altera- common sdc 2015-06-01 10:59:57 -04:00
Adrian Costina 83df53d9bf adc_common: Updated version because the delay registers have been changed 2015-05-25 17:18:14 +03:00
Adrian Costina 1ef83bd88b axi_ad9671: Updated port names. Fixed synchronization of the rx_sof with the ad_jesd_align module, so that data valid is assigned correctly 2015-05-23 00:16:27 +03:00
Istvan Csomortani 660c84e01c axi_ad9434 : Update the IO delay interface 2015-05-22 19:47:09 +03:00
Rejeesh Kutty 0c6ef203c0 iobuf: do is a system-verilog keyword 2015-05-21 14:06:13 -04:00
Rejeesh Kutty dc2eeebf2f upack: gen-name 2015-05-21 14:06:12 -04:00
Rejeesh Kutty 5c6340e927 dmac: clock-typo 2015-05-21 14:06:11 -04:00
Rejeesh Kutty e05ff26406 ad9144: ddata-typo 2015-05-21 14:06:09 -04:00
Rejeesh Kutty 8d78217f7b ad9680: missing prot. ports 2015-05-21 14:06:08 -04:00
Rejeesh Kutty 4c6a3afc88 ad9144: missing prot. ports 2015-05-21 14:06:06 -04:00
Lars-Peter Clausen a059290cf5 Remove axi_ad7175
This core has been superseded by the SPI Engine framework in combination
with the axi_generic_adc core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-21 17:21:35 +02:00
Lars-Peter Clausen c53f8c15ee Add CN0363 project
Add support for the CN0363 (colorimeter) board connected to the ZED board.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-21 17:21:35 +02:00
Lars-Peter Clausen d43ba44d0f Add util_sigma_delta_spi peripheral
The util_sigma_delta_spi peripheral can be used to seperate the interleaved
SPI bus and DRDY signals for a ADC from the Analog Devices SigmaDelta
family.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-21 17:21:35 +02:00
Lars-Peter Clausen e6b58e8a20 Add SPI Engine framework
SPI Engine is a highly flexible and powerful SPI controller framework. It
consist out of multiple sub-modules which communicate over well defined
interfaces. This allows a high degree of flexibility and re-usability while
at the same time staying highly customizable and easily extensible.

Currently included are four components:
	* SPI Engine execution module: The excution module is responsible for
	  handling the low-level physical interface SPI logic.
	* SPI Engine AXI interface module: The AXI interface module allows
	  memory mapped acccess to a SPI bus control stream and can be used to
	  implement a software driver that controls the SPI bus.
	* SPI Engine offload module: The offload module allows to store a
	  predefined SPI Engine command and data stream which will be send out
	  when a external trigger signal is asserted.
	* SPI Engine interconnect module: The interconnect module allows to
	  combine multiple control streams into a single stream giving multiple
	  control modules access to a execution module.

For more information see: http://wiki.analog.com/resources/fpga/peripherals/spi_engine

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-21 17:21:35 +02:00