Commit Graph

19 Commits (801351d93ce9425e41ff5c980d90bdced9fb81a4)

Author SHA1 Message Date
Istvan Csomortani 425e803364 license: Fix a spelling mistake 2018-04-11 15:09:54 +03:00
Rejeesh Kutty 4ef784b609 fmcomms2/zc702- pmod1 udc, pmod2 gpio 2017-08-09 14:08:47 -04:00
Istvan Csomortani 84b2ad51e2 license: Add some clarification to the header license 2017-05-31 18:18:56 +03:00
Istvan Csomortani 85ebd3ca01 license: Update license terms in hdl source files
Fix a few gramatical error, fix the path of the top level license
files.
2017-05-29 09:55:41 +03:00
Istvan Csomortani 9055774795 all: Update license for all hdl source files
All the hdl (verilog and vhdl) source files were updated. If a file did not
have any license, it was added into it. Files, which were generated by
a tool (like Matlab) or were took over from other source (like opencores.org),
were unchanged.

New license looks as follows:

Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.

Each core or library found in this collection may have its own licensing terms.
The user should keep this in in mind while exploring these cores.

Redistribution and use in source and binary forms,
with or without modification of this file, are permitted under the terms of either
 (at the option of the user):

  1. The GNU General Public License version 2 as published by the
     Free Software Foundation, which can be found in the top level directory, or at:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html

OR

  2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 11:52:08 +03:00
Istvan Csomortani 1d4b92190a fmcomms2/zc702: Fix Warning[Synth 8-2611]
In Verilog-2001 standard, redeclaration of an output port as a wire
is not allowed.
2017-04-19 13:54:03 +03:00
Istvan Csomortani 1c23cf4621 all: Update verilog files to verilog-2001 2017-04-13 11:59:55 +03:00
Istvan Csomortani 28d20e84c5 fmcomms2/zc702: Fix the system_top
Fix the enable/txnrx control lines.
2015-09-25 19:11:30 +03:00
Istvan Csomortani 28aea82952 fmcomms2_zc702: Add SPI and GPIO interface for FREQCVT 2015-07-22 10:16:04 +03:00
Istvan Csomortani 0102e3e02c fmcomms2_ALL: Preserve backward compatibility for ENABLE/TXNRX control
By default the ENABLE/TXNRX pins are controlled by GPIOs, if the TDD module is enabled, the TDD FSM will take over the control of these two pins.
2015-07-01 13:54:01 +03:00
Rejeesh Kutty a6cae6b477 iobuf: do is a system verilog keyword 2015-05-21 14:06:17 -04:00
Adrian Costina 9dac22c814 fmcomms2: ZC702 fixed GPIOs in top file 2015-04-02 15:30:41 +03:00
Istvan Csomortani f0d08abe03 fmcomms2: Fix system_top.v for a few carrier
Interrupts are connected inside IPI. Fix system_top for zed, zc702, zc706 and kc705.
2015-03-18 10:37:24 +02:00
Adrian Costina 70e1d13a7b fmcomms2: Updated project 2015-03-13 12:49:17 +02:00
Adrian Costina ad08c62b36 fmcomms2: Updated zc702 project. Updated interrupts. Updated constraints 2014-11-07 14:01:55 +02:00
Istvan Csomortani f528873fa9 fmcomms2: Add an additional SPI interface for up/down converter board
Supported carriers are: ZC706, ZC702 and Zed.
2014-10-10 18:47:07 +03:00
Istvan Csomortani ca4c961891 fmcomms2: Use ad_iobuf instance on system_top
Use ad_iobuf instance on system top, instead of separate IOBUF instances.
2014-10-10 18:45:39 +03:00
Istvan Csomortani e21d26e456 fmcomms2: Cosmetic changes
Get rid of unwanted whitespaces.
2014-10-10 18:25:17 +03:00
ATofan 2c898bf3a2 Added ZC706, ZC702 and ZED FMCOMMS2 Vivado Project
ZC706 runs rx_clk at 250 MHz.
ZC702 and ZED run rx_clk at 200 MHz due to slower fabric.
The ZC702 and ZED projects need init_user in the boot procedure in order for the HP Ports to work correctly.
Both DDS and DMA mode work.
2014-03-18 15:27:42 +02:00