Commit Graph

369 Commits (6cff03390c58eb8fdb3623679cfdf7eed4e0c7a7)

Author SHA1 Message Date
Rejeesh Kutty 6cff03390c makefile: added 2015-04-01 16:27:32 -04:00
Rejeesh Kutty a97fc603f8 makefile: added 2015-04-01 16:27:31 -04:00
Rejeesh Kutty 35205c43a1 makefile: added 2015-04-01 16:27:30 -04:00
Rejeesh Kutty 1b5737968a makefile: added 2015-04-01 16:27:29 -04:00
Rejeesh Kutty 6ac43fe516 makefile: added 2015-04-01 16:27:27 -04:00
Rejeesh Kutty c2e626d0b6 axi_hdmi_tx: es split 2015-04-01 15:08:24 -04:00
Rejeesh Kutty 3bca324c33 hdmi_rx: 64bit + es split 2015-04-01 14:25:55 -04:00
Rejeesh Kutty 56165b89f7 hdmi_rx: 64bit + es split 2015-04-01 14:25:49 -04:00
Rejeesh Kutty 01d0b495ec hdmi_rx: 64bit + es split 2015-04-01 14:25:45 -04:00
Rejeesh Kutty d4763fe356 hdmi_rx: 64bit + es split 2015-04-01 14:25:41 -04:00
Adrian Costina 11d94b736a util_gmii_to_rgmii: Added to dev branch 2015-04-01 17:22:49 +03:00
Lars-Peter Clausen ae26c7817e Remove util_sync_reset
The util_sync_reset peripheral hasn't been used in a while and will not be
used in new projects. So remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-01 14:46:41 +02:00
Lars-Peter Clausen fd7a423f74 axi_dmac: Reset data stream resize blocks when disabled
When the DMA controller gets disabled in the middle of a transfer it is
possible that the resize block contains a partial sample. Starting the next
transfer the partial sample will appear the begining of the new stream and
also cause a channel shift.

To avoid this make sure to reset and flush the resize blocks when the DMA
controller is disabled.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-01 14:18:34 +02:00
Adrian Costina 2d7bae2ba6 axi_mc_controller: Added delay module 2015-04-01 12:22:20 +03:00
Adrian Costina de12184038 axi_mc_speed: Updated for motor control revision 2 2015-04-01 11:43:22 +03:00
Adrian Costina d5fa0071bd axi_mc_current_monitor: Updated for motor control revision 2 2015-04-01 11:42:28 +03:00
Adrian Costina 6ee66df41e axi_mc_controller: Updated for motor control revision 2 2015-04-01 11:41:33 +03:00
Adrian Costina 4b1d9fc86b axi_dmac: Modified in order to avoid vivado crash 2015-04-01 11:39:25 +03:00
Istvan Csomortani e116822059 imageon_zc706: Updates and fixes
+ sync the sof to the dma_de signal
+ hdmi_rx_dma is connected to the HP1
+ fix syncronization signal in the CSC module
+ hdmi_rx_clk is asynchronous
2015-03-27 18:57:32 +02:00
Istvan Csomortani 0e1a60e8b7 axi_dmac: Brought up the transfer request signal for the dest_fifo and dest_axi_stream interface. 2015-03-26 12:20:32 +02:00
Adrian Costina 6ee9b3a1e2 util_wfifo: Fixed reset 2015-03-25 15:34:21 +02:00
Rejeesh Kutty 552d9b41f7 imageon: updates 2015-03-24 15:08:48 -04:00
Rejeesh Kutty b29e97f985 hdmi_rx: imageon updates 2015-03-24 15:08:48 -04:00
Rejeesh Kutty ffe410b2dd hdmi_rx: imageon updates 2015-03-24 15:08:48 -04:00
Rejeesh Kutty 09bb184505 hdmi_rx: imageon updates 2015-03-24 15:08:48 -04:00
Rejeesh Kutty f92011f72d hdmi_rx: imageon updates 2015-03-24 15:08:48 -04:00
Rejeesh Kutty 5d50d38c66 hdmi_rx: imageon updates 2015-03-24 15:08:48 -04:00
Istvan Csomortani 80c2a5a45d axi_hdmi_rx: General clean up 2015-03-23 12:39:26 +02:00
Rejeesh Kutty 8f5551718e axi_fifo2s: false paths on up_xfer_toggle 2015-03-19 16:33:14 -04:00
Adrian Costina 7e15fd9e5b util_upack: Fixed ip 2015-03-19 16:22:12 +02:00
Adrian Costina bc04e5a4ce axi_i2s_adi: Fixed pins directions 2015-03-12 17:22:52 +02:00
Rejeesh Kutty 8dfcbdfd48 gt_channel/gt_common: simulation parameter warning fix 2015-03-06 12:36:07 -05:00
Rejeesh Kutty 57e1f0e334 gt_channel/gt_common: simulation parameter warning fix 2015-03-06 12:36:03 -05:00
Rejeesh Kutty 2d01955042 up_gt: change version dfe/lpm support 2015-03-05 09:47:16 -05:00
Istvan Csomortani 6995f63134 Add version check to adi_ip.tcl too. 2015-03-05 11:55:09 +02:00
Istvan Csomortani 1613f7fb41 cftl_cip: Add util_pmod_fmeter IP to library
Frequency meter IP for CN0332.
2015-02-23 17:20:12 +02:00
Lars-Peter Clausen 65bda6505e axi_dmac: Correctly handle shutdown for the request splitter
We need to make sure to not prematurely de-assert the s_valid signal for the
request splitter when disabling the DMAC. Otherwise it is possible that
under certain conditions the DMAC is disabled with a partially accepted
request and when it is enabled again it will continue in an inconsistent
state which can lead to transfer corruption or pipeline stalls.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:22:23 +01:00
Lars-Peter Clausen 731e1c0996 axi_dmac: Use internal enable signal for the request generator
All components should use the internal 'do_enable' signal instead of the
external 'enable' signal. The former correctly incorporates the shutdown
sequence and does not get asserted again until the shutdown has been
completed. Using the external signal can cause problems when it is disabled
and enabled again in close proximity.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:22:23 +01:00
Lars-Peter Clausen 582ea06918 axi_dmac: request_generator: Stop generating requests when disabled
Currently when the DMAC gets disabled the request_generator will still
generate all remaining burst requests for the currently active transfer.
While these requests will be ignored by the source and destination component
this can still take a fair amount of time for long transfers.

So just stop generating burst requests once the DMAC is being disabled.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:22:23 +01:00
Lars-Peter Clausen aa594e15f3 axi_dmac: fifo_inf: Handle overflow and underflow correctly
Refactor the fifo_inf modules to always correctly generate the underflow and
overflow status signals. Before it was possible that in some cases they
were not generated when they should have been.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:22:21 +01:00
Rejeesh Kutty 6edcaa478a adi_ip: updates for 2014.4 2015-02-19 11:11:39 -05:00
Rejeesh Kutty 9cdec38532 gt- report device type 2015-02-17 11:43:57 -05:00
Rejeesh Kutty 2442b6e929 gt- report device type 2015-02-17 11:43:50 -05:00
Rejeesh Kutty fccadcec31 jesd_gt: lpm/dfe programmable 2015-02-13 11:33:25 -05:00
Rejeesh Kutty de043ce130 gt_channel: lpm/dfe programmable 2015-02-13 11:33:04 -05:00
Rejeesh Kutty 870ebdb562 up_gt: support lpm mode 2015-02-12 16:21:11 -05:00
Rejeesh Kutty 1e7c9a3924 gt_es: support lpm mode - 2/2 2015-02-12 16:20:43 -05:00
Rejeesh Kutty 0a8e6f62ef gt_es: support lpm mode - 1/2 2015-02-12 15:15:18 -05:00
Rejeesh Kutty 9e2e2ef44e xfer-logic: stretch toggles to allow capture 2015-02-06 22:15:16 -05:00
Rejeesh Kutty e9231c8f36 xfer-logic: stretch toggles to allow capture 2015-02-06 22:15:14 -05:00