Commit Graph

1595 Commits (6b9906b22bf53fce08ccfd69ba76b2517b1e0e5f)

Author SHA1 Message Date
Rejeesh Kutty 0dc4c9cda9 adi_project: added partial reconfiguration 2015-05-01 12:21:59 -04:00
Rejeesh Kutty 140c622c8b prcfg: common files 2015-05-01 11:48:09 -04:00
Rejeesh Kutty a8d4c916c1 fmcomms2_bd: remove axi3 switch 2015-05-01 11:47:29 -04:00
Adrian Costina be32715ab3 axi_adcfifo: Updated constraints 2015-04-30 14:23:24 +03:00
Adrian Costina 3b58785368 daq1: Updated jesd reset connection. Fixed dmac async configuration. Updated zc706 constraints 2015-04-30 12:14:03 +03:00
Adrian Costina e332fa01c8 ad6676evb, daq2, fmcadc2, fmcjesdadc1, usdrx1: Updated jesd reset connection 2015-04-30 12:11:46 +03:00
Adrian Costina d623f77453 axi_jesd_gt: Added rx_jesd_rst and tx_jesd_rst.
Resets for both up clock domain and rx clock domain are needed in some projects
2015-04-30 12:07:36 +03:00
Adrian Costina 463c4d4d28 util_wfifo: Added constraint for the resetn path 2015-04-30 12:05:02 +03:00
Adrian Costina 392ba31a07 axi_hdmi_rx: Updated constraints 2015-04-30 12:04:15 +03:00
dbogdan 1df48a2e6e Add hdmiio_int pin. 2015-04-29 18:50:28 +03:00
Adrian Costina 19ef85cec3 vc707: Changed mig project to use BANK_ROW_COLUMN, as it seems this mode gives best performance 2015-04-28 17:15:58 +03:00
Adrian Costina 288b9cccff Makefile: Added makefiles for imageon_loopback project. Updated axi_ad9152, util_gmii_to_rgmii, util_wfifo to include constraints file 2015-04-28 15:22:37 +03:00
Adrian Costina 252aa135eb ad9739a: Changed dma and interconnect clock to 200mhz. Removed div_clk constraint, as it is autodetected 2015-04-28 15:14:31 +03:00
Adrian Costina a7a2d194e9 axi_jesd_gt: Switched rx_rst and rx_rst_done to up clock domain, to be compatible with xilinx JESD core 2015-04-28 15:04:18 +03:00
Adrian Costina 3fdda617a4 fmcomms1: updated common, changed DMAC fifo size and wfifo reset signal source
- changed DMAC FIFO size to 16, as it should be large enough
- connected wfifo reset to adc_rst from axi_ad9643 core
2015-04-28 14:58:04 +03:00
Adrian Costina 37bfb2ef4b ad9265: Updated common, wfifo is reset by the adc_rst signal from axi_ad9265 core 2015-04-28 14:53:12 +03:00
Adrian Costina c36186f75a axi_ad9643: Added adc_rst output 2015-04-28 14:52:24 +03:00
Adrian Costina 8ee3f64a65 axi_ad9265: Added adc_rst output 2015-04-28 14:51:14 +03:00
Adrian Costina 67c581cef8 util_wfifo: Updated to be used with adc_rst from the adc_clk clock domain 2015-04-28 14:50:00 +03:00
dbogdan 1eebfd3155 projects/imageon_loopback: Initial commit. 2015-04-28 10:32:28 +03:00
Adrian Costina e51edfbadb adv7511: KC705 mdio pin name fix 2015-04-27 11:21:36 +03:00
Adrian Costina 7e6f2bfa15 ad9265: Updated constraints file. 2015-04-27 11:20:42 +03:00
Adrian Costina 1ad87aa27c util_wfifo: Added constraints 2015-04-27 11:19:56 +03:00
Adrian Costina 81d4e1d9b1 axi_clkgen: Updated constraints 2015-04-27 11:19:15 +03:00
Adrian Costina d950f5ffcd axi_ad9122: Updated constraints 2015-04-27 11:18:52 +03:00
Istvan Csomortani 9fba4cb2ef util_dacfifo: Add support for Slave AXI stream interface.
The FIFO can be initialized through an AXI stream interface too.
2015-04-27 10:40:55 +03:00
Lars-Peter Clausen 3a02998e9a axi_ad9152/axi_ad9152_ip.tcl: Fix typo
axi_ad9152_constr.v -> axi_ad9152_constr.xdc

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-24 09:41:43 +02:00
Rejeesh Kutty 272148eee5 rfsom: sdio 50mhz 2015-04-23 15:30:50 -04:00
Rejeesh Kutty 7611c2ae17 kcu105: ddr mig rbc to rcb 2015-04-23 15:30:48 -04:00
Istvan Csomortani bb185296d7 fmcadc2_vc707: Increase the BRAM FIFO size to its maximum: it can store 1M samples.
The 2^18 dma address width with a 64 dma data width will result a FIFO, what will be implemented by 512 RAMB36 cells.
This is a the maximum BRAM FIFO depth in case of the VC707.
2015-04-23 18:00:00 +03:00
Adrian Costina a9924e6401 util_gmii_to_rgmii: Added constraints 2015-04-23 16:53:57 +03:00
Lars-Peter Clausen f232a36141 common: Place HDMI interface registers into the IOB
The paths from the HDMI interface registers to the IO pads are
unconstrained. This means the P&R can in theory put the register anywhere
which could lead to stability issues on the interface, depending on what
else is in the fabric. To get predictable delays for the register to IO pad
path place the register into the IOB section.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-23 14:33:47 +02:00
Lars-Peter Clausen bd6c76f4ab fmcomms5: Set DMA AXI type to AXI3 on ZYNQ
The HP memory ports on ZYNQ are AXI3. The AXI-DMAC supports both native AXI3
and AXI4, by configuring it for AXI3 there is no need for a protocol
converter inside the interconnect, that connects the DMAC to the HP port.

In addition to that also set the data width for the DMAC on the HP port side
to 64 so there is no need for a memory width converter in the interconnect.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-23 14:33:47 +02:00
Lars-Peter Clausen 4ed7c9aee9 fmcomms2_pr: zc706: Fix ddr and fixed_io signal names
The toplevel input/output signal names are lower case, but the signals
connected to the system_wrapper are upper case. Since verilog is case
sensitive this leaves the toplevel input/output signals unconnected. Fix
this by using lower case names everywhere.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-23 14:33:47 +02:00
Lars-Peter Clausen 558f2e89af imageon: zc706: Fix ddr and fixed_io signal names
The toplevel input/output signal names are lower case, but the signals
connected to the system_wrapper are upper case. Since verilog is case
sensitive this leaves the toplevel input/output signals unconnected. Fix
this by using lower case names everywhere.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-23 14:33:47 +02:00
Lars-Peter Clausen 1bb5b6e55f adv7511: zc706: Fix ddr and fixed_io signal names
The toplevel input/output signal names are lower case, but the signals
connected to the system_wrapper are upper case. Since verilog is case
sensitive this leaves the toplevel input/output signals unconnected. Fix
this by using lower case names everywhere.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-23 14:33:47 +02:00
Adrian Costina bd06bae8c2 library: Modified the adi_ip.tcl script
The constraints processing order changed to "late" instead of "early", in order for all the clocks in the system to be already created when the IP constraints are applied
2015-04-23 14:31:23 +03:00
Adrian Costina a61a195e3f Makefiles: Updated makefiles to add the new constraints as dependecies 2015-04-23 11:16:39 +03:00
Adrian Costina d42c0bc431 axi_jesd_gt : Added CDC and reset constraints 2015-04-23 11:03:51 +03:00
Adrian Costina 1b4e6bdc80 axi_mc_speed : Added CDC and reset constraints 2015-04-23 10:50:49 +03:00
Adrian Costina 6d28d217f1 axi_mc_current_monitor: Added CDC and reset constraints 2015-04-23 10:49:43 +03:00
Adrian Costina d0b2d531bc axi_mc_constroller: Added CDC and reset constraints 2015-04-23 10:47:35 +03:00
Adrian Costina d0571a912f axi_hdmi_tx: Added CDC and reset constraints 2015-04-23 10:46:04 +03:00
Adrian Costina cc7d9f9d54 axi_clkgen: Added CDC and reset constraints 2015-04-23 10:44:37 +03:00
Adrian Costina d1558df625 axi_ad9739a: Added CDC and reset constraints 2015-04-23 10:42:27 +03:00
Adrian Costina 97dc7ea004 axi_ad9680: Added CDC and reset constraints 2015-04-23 10:40:41 +03:00
Adrian Costina f1f8c14813 axi_ad9671: Added CDC and reset constraints 2015-04-23 10:39:11 +03:00
Adrian Costina 744a15a0ba axi_ad9652: Added CDC and reset constraints 2015-04-23 10:37:15 +03:00
Adrian Costina eca616a3ae axi_ad9643: Added CDC and reset constraints 2015-04-23 10:35:12 +03:00
Adrian Costina a62415b0ab axi_ad9625: Added CDC and reset constraints 2015-04-23 10:33:51 +03:00