26f58914e2
axi_mc_current_monitor: updated core to latest axi interface implementation
2014-12-05 11:53:06 +02:00
7e8e1e4fd0
axi_mc_controller: updated core to latest axi interface implementation
2014-12-05 11:52:59 +02:00
4c05e8de5d
motor_control: Updated project to Vivado 14.2. Temporary removed XADC
...
- fixed constraints
- updated interrupt system
- used ad_iobuf
- The XADC was removed because the XADC IPI generates vaux inputs 0 and 10 even if 0 and 8 are selected
2014-12-05 11:48:00 +02:00
ea1a50c985
axi_mc_speed: updated core to latest axi interface implementation
2014-12-05 11:46:20 +02:00
0d2888a5a6
axi_mc_current_monitor: updated core to latest axi interface implementation
2014-12-05 11:45:37 +02:00
21591dc485
axi_mc_controller: updated core to latest axi interface implementation
2014-12-05 11:43:59 +02:00
11f41d1dff
zynq_plddr3: Fix PLDDR3's Reset Generator
...
Reset generator's external reset signal was active low, but the GT reset is active high, and both the DDR controller and FIFO2S were in reset.
Therefore the external reset active state is changed to active high. This setup in general is made by the tool automatically, in order to do it correctly, need to
set this two property of the reset generator.
2014-12-04 15:42:28 +02:00
34ffa15b12
zynq_plddr3: Fix PLDDR3's Reset Generator
...
Reset generator's external reset signal was active low, but the GT reset is active high, and both the DDR controller and FIFO2S were in reset.
Therefore the external reset active state is changed to active high. This setup in general is made by the tool automatically, in order to do it correctly, need to
set this two property of the reset generator.
2014-12-04 15:39:17 +02:00
58bc7c6886
fmcomms6: Add DMA overflow signal to ILA
...
This is useful for debugging DMA overflows.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 14:23:09 +01:00
a9c6148570
fmcomms6: Better cope with higher sample rates
...
There can be a rather high latency between the last byte of a burst has been send and the time the response for the burst is received. Running at high samplerates this can cause the internal DMA store and forward FIFO to fill up and subsequently stall the DMA pipeline and drop samples. To better cope with the situation double the size of the internal FIFO. Also increase the clock of the AXI bus to be able to accommodate a samplerate of 310MHz.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 13:56:59 +01:00
324c0528c2
fmcomms6: Better cope with higher sample rates
...
There can be a rather high latency between the last byte of a burst has been send and the time the response for the burst is received. Running at high samplerates this can cause the internal DMA store and forward FIFO to fill up and subsequently stall the DMA pipeline and drop samples. To better cope with the situation double the size of the internal FIFO. Also increase the clock of the AXI bus to be able to accommodate a samplerate of 310MHz.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 13:28:37 +01:00
46156b7ceb
fmcomms6: Add DMA overflow signal to ILA
...
This is useful for debugging DMA overflows.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 13:28:37 +01:00
3cc890e604
projects/common: KCU105 VC707 update and sync axi_ethernet:6.1 features
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-04 09:49:09 +01:00
2d8450abc4
Merge branch 'dev' of https://github.com/analogdevicesinc/hdl into dev
2014-12-04 09:47:46 +01:00
3bc9b25e96
projects/common: KCU105 VC707 KC705 sync microblaze core defaults
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-04 09:47:02 +01:00
56a8a54080
ad9625x2_fmc: Increase the dma fifo data depth
2014-12-03 12:13:08 +02:00
757c213165
ad9625x2_fmc: Integrate the dac spi interface into the SPI interface
2014-12-03 12:06:43 +02:00
48673fec6a
ad9625x2_fmc: Integrate the dac spi interface into the SPI interface
2014-12-03 12:01:47 +02:00
80d1314c5e
ad9625x2_fmc: Reverse "Add a separate SPI for the DAC interface"
2014-12-03 10:14:09 +02:00
d89ed56e10
ad9625x2_fmc: Increase the data depth of the dmafifo
2014-12-02 19:29:19 +02:00
0007054638
ad9625x2_fmc: Add a separate SPI for the DAC interface
...
DAC spi interface is controlled by an axi_spi core.
Modifications on GPIO layout: pwr_good is 12, vdither 13 and trig is 14.
2014-12-02 19:29:18 +02:00
2e611ca013
Merge branch 'hdl_2014_r2' into dev
2014-12-02 10:45:35 -05:00
805d52346c
fmcomms7: compilation fixes on plddr3
2014-12-02 10:39:01 -05:00
f01d1aae2d
fmcomms7: compilation fixes on plddr3
2014-12-02 10:38:44 -05:00
95e113e1a3
fmcomms6: Connect DMA directly to the HP port
...
The axi_dmac supports native AXI3, there is no need to add a interconnect
for protocol conversion between it and the HP port.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
45fc7bb7e2
fmcomms6: Set ila type to native
...
With version 4.0 ila defaults to the AXI monitor type, so explicitly
configure it for native.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
5b68b79dec
ad9467_fmc: Set ila type to native
...
With version 4.0 ila defaults to the AXI monitor type, so explicitly
configure it for native.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
6197563506
up_axi: Fix up_raddr/up_waddr port width
...
Make sure that the port declaration width matches with the reg declaration
later on.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
d773673e4f
fmcomms6: Connect DMA directly to the HP port
...
The axi_dmac supports native AXI3, there is no need to add a interconnect
for protocol conversion between it and the HP port.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:44:09 +01:00
5169d3ef59
fmcomms6: Set ila type to native
...
With version 4.0 ila defaults to the AXI monitor type, so explicitly
configure it for native.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:44:09 +01:00
3c85c7e2f8
ad9467_fmc: Set ila type to native
...
With version 4.0 ila defaults to the AXI monitor type, so explicitly
configure it for native.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:44:08 +01:00
8cc9adfc49
up_axi: Fix up_raddr/up_waddr port width
...
Make sure that the port declaration width matches with the reg declaration
later on.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:22:28 +01:00
7a55db59f6
fmcomms2: Zed, fixed iic multiplexer ad_iobuf connections
2014-11-28 14:19:08 +02:00
d5422c2ecc
fmcomms2: Zed, fixed iic multiplexer ad_iobuf connections
2014-11-28 14:17:09 +02:00
d5a1df2fe6
usdrx1_zc706: Update interrupts.
2014-11-27 14:06:13 +02:00
eed1981ede
usdrx1_fmc: Fix GT lane number definition.
2014-11-27 14:05:54 +02:00
a576f7dc98
ad9671_zc706: Update interrupts
2014-11-27 14:05:43 +02:00
0ccc546aeb
ad9671_fmc: Fix GT lane number definition
2014-11-27 14:05:34 +02:00
ee7d427123
ad9671_fmc: Cosmetic changes
...
Delete trailing whitespaces.
2014-11-27 14:05:24 +02:00
4ea86de4db
usdrx1_zc706: Update interrupts.
2014-11-27 14:03:54 +02:00
d1af4d2951
usdrx1_fmc: Fix GT lane number definition.
2014-11-27 14:03:10 +02:00
82561b48cc
ad9671_zc706: Update interrupts
2014-11-27 14:02:18 +02:00
92f85086e3
ad9671_fmc: Fix GT lane number definition
2014-11-27 14:01:36 +02:00
98e8f21c1d
ad9671_fmc: Cosmetic changes
...
Delete trailing whitespaces.
2014-11-27 14:00:35 +02:00
419d38b9f6
kc705_base: Define sys_addr_mem_seg for dmafifo
2014-11-26 15:38:41 +02:00
6fd2f8c913
daq2_fmc: Update interrupts
...
Update interrupts for ZC706 and KC705 carrier.
2014-11-26 15:38:24 +02:00
bfd89dc9c7
daq2_kc705: Fix constraint file
...
I/O standard for trig_[p/n] is LVDS_25
2014-11-26 15:38:10 +02:00
630f26442a
daq2_kc705: Instantiate dmafifo module
2014-11-26 15:37:57 +02:00
00c7b23b21
daq2_fmc: Cosmetic changes
...
Delete trailing whitespaces, no functional changes.
2014-11-26 15:37:48 +02:00
12f1873e17
kc705_base: Define sys_addr_mem_seg for dmafifo
2014-11-26 15:08:55 +02:00
Adrian Costina
Istvan Csomortani
Lars-Peter Clausen
Michael Hennerich
Rejeesh Kutty