753f4bd06e
axi_intr_monitor: Slightly modify counter start points
...
Start the counter_to_interrupt_cnt counter when the counter_to_interrupt
value is written to the register map. This gives applications better
control over when the counter starts counting.
Also start the counter_from_interrupt on the rising edge of the interrupt
signal to avoid bogus values.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-12-02 20:09:29 +01:00
334ce5ddc0
axi_intr_monitor: Fully register IRQ output signal
...
The IRQ signal goes to a asynchronous domain. In order to avoid glitches to
be observed in that domain make sure that the output signal is fully
registered.
This means that the IRQ signal is no longer mask when the control enable
bit is not set. Instead modify the code to clear the interrupt when the
control enable bit is not set. This turns it into a true reset for the
internal state.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-12-02 19:28:13 +01:00
170c781d02
hdlmake.pl- updates
2016-12-01 13:52:11 -05:00
95a2e02800
library/makefile- updates
2016-12-01 13:47:02 -05:00
609b01f9e4
util_clkdiv: Added division by 2 option
2016-11-24 16:01:37 +02:00
91ee4394e4
axi_intr_monitor: Initial commit
2016-11-24 15:19:36 +02:00
f03675cdab
axi_dmac: ID_WIDTH must be clog2(FIFO_SIZE*2)
2016-11-24 13:20:45 +02:00
c705623101
axi_dmac: Fix port connection and port width mismatch
2016-11-24 12:01:45 +02:00
862bd7ef2c
daq3/zc706- xcvr changes
2016-11-23 15:02:20 -05:00
025420d6f8
library/axi_xcvrlb- xcvr changes
2016-11-23 12:00:13 -05:00
8f562fd069
xcvr updates- board procedure
2016-11-22 14:43:36 -05:00
2ea997c3d5
interfaces- remove channel based pll reset
2016-11-22 11:34:29 -05:00
3dbed492b3
util_adxcvr: expose cpll/qpll as it is
2016-11-22 11:32:37 -05:00
3cbe735bd8
util_adxcvr: regenerate from script
2016-11-22 11:21:04 -05:00
c57ffc9364
axi_adxcvr- separate pll reset from channels
2016-11-22 11:12:54 -05:00
b9795c7033
xilinx/util_adxcvr: Update enablement dependencies
2016-11-22 17:33:40 +02:00
2f2570fcac
axi_i2s: Remove incorrectly inferred interfaces
...
Remove interfaces that were incorrectly inferred by the tools.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-18 15:01:29 +01:00
43c74bf55c
axi_i2s: Tie-off optional inputs
...
Tie-off all optional inputs to 0 so that they are driven to a defined value
when not used.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-18 15:01:26 +01:00
26907ef1fd
axi_i2s: Remove duplicated clock interface association
...
The I2S interface has a clock associated to it twice, this will generate a
critical warning when using the core, so remove one of them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-18 15:01:24 +01:00
b85a282748
fmcomms11- lane swap
2016-11-16 10:26:47 -05:00
9d6c93a5d8
Fix warnings
2016-11-14 15:17:15 +02:00
12d6e46ae7
clean: Delete deprecated source files
...
The axi_jesd_gt was repleaced by axi_adxcvr IP, which is located
at library/xilinx and library/altera.
The axi_jesd_xcvr was an early version of axi_adxcvr.
The register map is moved to the IP's directory.
2016-11-14 10:43:46 +02:00
c80033cb1b
util_fir_int: removed s_axis_data_tvalid and updated sdrstk
2016-11-11 17:52:19 +02:00
6f4dc92dd2
util_fir_int: Fix channel data assignment
2016-11-11 15:46:17 +02:00
64d1d54ec0
util_fir_int: Update filter, as it's used with ad9361 in CMOS mode
2016-11-10 17:45:03 +02:00
66098b7ae7
util_fir_dec: Update filter, as it's used with ad9361 in CMOS mode
2016-11-10 17:43:04 +02:00
6073cdded4
axi_ad9250: Tie rx_valid to ground
2016-11-10 10:52:37 +02:00
8845aeb6ab
axi_ad9250: Add missing file to Make and script
2016-11-10 10:48:46 +02:00
8493bd4329
axi_ad6676: Update the core, sof interface added
2016-11-10 10:39:33 +02:00
0b58a2a1db
avl_adxcvr- sysclk frequency
2016-11-09 09:21:07 -05:00
48ee720901
avl_adxcvr- a5 requires single transceiver controller
2016-11-08 15:20:01 -05:00
a58597c13a
ad9250 - build fixes
2016-11-08 15:17:54 -05:00
d7357d781b
axi_ad9250 - avalon/axi streaming + sof
2016-11-04 15:30:39 -04:00
ee9c8b884d
avlxcvr- add arria v support
2016-11-04 15:01:19 -04:00
9dc7f16d80
axi_usb_fx3: Added zero length packet capability
2016-11-03 15:29:56 +02:00
1e0fed82f7
alt_serdes- a10 ddio fixes
2016-11-01 12:41:25 -04:00
5eff357568
up_tdd_cntrl: Fix memory map register writes
2016-11-01 10:06:57 +02:00
9f4c5f8060
arradio/ad9361- updates
2016-10-31 15:34:32 -04:00
b94cc8afb1
altera- cmos cores
2016-10-31 13:13:48 -04:00
e0459df0f3
altera -c5 qsys alternative
2016-10-31 11:18:27 -04:00
cc75fa3dfe
altera- java/tcl mess handling
2016-10-31 10:54:07 -04:00
a9d03af771
altera- serdes changes
2016-10-28 14:09:18 -04:00
f2e12cc88f
util_fir_dec: Shifted the output data to the left so that the amplitude remains
...
constant
2016-10-28 15:18:36 +03:00
d9b756e7ad
util_fir_int: Shifted the output data to the left so that the amplitude remains constant
2016-10-28 15:17:30 +03:00
30314e4492
library: Added util_fir_int and util_fir_dec interpolation/decimation filters
2016-10-27 19:31:50 +03:00
8107514dde
altera/common- ad_serdes_clk
2016-10-27 09:41:10 -04:00
f7e3703b98
axi_ad9371- avalon-s interfaces
2016-10-27 09:25:00 -04:00
6f611e0d10
altera/alt_serdes: Add support for Cyclone V
2016-10-25 20:32:51 +03:00
08cef5a745
axi_ad9361: Add Cyclone V SERDES support
2016-10-25 20:24:17 +03:00
5731ba3300
fmcomms11- xcvr updates
2016-10-24 09:51:40 -04:00
de0c487195
axi_ad9684: Add Altera support for the core
2016-10-24 11:43:22 +03:00
3f3606d318
axi_ad9122: Add Altera support for the core
2016-10-24 11:43:12 +03:00
aa46de5e5e
adi_ip_alt: Add ad_generate_module_inst proc
...
Add a tcl process, which can be used to generate custom module
names during the generation phase. This will be used to create
different ad_serdes_clk module, in case when independent IOPLLs are
needed for TX and RX.
2016-10-24 11:43:00 +03:00
707038937a
alt_serdes: Add additional parameters
...
Add additional parameters to keep the top of ad_serdes_* modules
consistant through differente carriers.
2016-10-24 11:42:43 +03:00
8dbfe9258f
axi_ad9162: Delete duplicated port
2016-10-21 13:47:01 +03:00
0beecea02d
util_adxcvr- ultrascale updates
2016-10-19 13:06:10 -04:00
72c05e8635
axi_dmac: Fix constraints for ultrascale
...
Replace "PRIMITIVE_SUBGROUP == flop" with "IS_SEQUENTIAL" as the former is
series7 specific while the later works on all platforms. This fixes the
axi_dmac timing constraints for ultrascale based platforms.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-10-19 14:00:54 +02:00
ecc0addb8c
scripts/adi_ip_alt.tcl: Script is case insensitive for its arguments
2016-10-18 11:25:06 +03:00
bf949f1a88
axi_xcvrlb- xcvr updates
2016-10-17 16:16:57 -04:00
1b3fcb5863
util_adxcvr- parameter defaults
2016-10-17 16:10:57 -04:00
a026d44435
axi_generic_adc: Add missing up_adc_common connections
2016-10-12 13:20:26 +03:00
b543402051
axi_mc_current_monitor: Add missing up_axi connection
2016-10-12 13:20:26 +03:00
91995c082d
axi_ad9684: Fixed up_drp_*data width
2016-10-12 13:20:26 +03:00
a505d304af
Add up_dac_common missing connections
2016-10-12 13:20:26 +03:00
43ee917d53
Add up_dac_channel missing connections
2016-10-12 13:20:26 +03:00
1131be91ed
axi_ad9361: Makefile update
2016-10-11 23:34:13 +03:00
b7767aa18f
xilinx/axi_ad9361_lvds_if: Remove ila
2016-10-11 18:13:45 +03:00
2d93d787ab
altera/ad_cdfilter: Update interface to Verilog 2001 standard
2016-10-11 17:59:21 +03:00
369dad60b0
axi_ad9361: Add Altera SERDES interface support
2016-10-11 17:59:19 +03:00
ae47895666
altera/alt_serdes: Fixed SERDES 4 factor initialization
2016-10-11 17:59:17 +03:00
d41945f568
altera/ad_serdes: Add support for any SERDES factor less than 8
2016-10-11 17:59:14 +03:00
52194f0fea
axi_ad9361: Add DRP connection to the interface module
2016-10-11 17:59:12 +03:00
7194d2eccc
axi_ad9361: Grup interfaces to add support for more carriers
2016-10-11 17:58:49 +03:00
cc6ca4f0f2
ad_lvds_in- ultrascale sim device
2016-10-10 10:39:47 -04:00
121b341b45
axi_spdif_rx: Fixed version register issue. Added sampled_data to sensitivity list
2016-10-10 17:30:13 +03:00
ff980551e6
ad_serdes: SERDES_FACTOR handover missing
...
In modules ad_serdes_in/ad_serdes_out the handover of the parameter
SERDES_FACTOR did not exist, causing unwanted behavioral in case of
factors less than 8.
SERDES_FACTOR must be hand over to DATA_WIDTH parameter of the SERDES
primitive.
2016-10-10 16:38:42 +03:00
f34aa67029
axi_hdmi: Fix a typo
2016-10-10 16:22:18 +03:00
15f36af4c2
axi_ad9152: Update core to support Altera platforms
2016-10-10 16:21:49 +03:00
111adac825
axi_usb_fx3: Updated core
...
- trig signal will reset state machine
- slrd_n delay will be absorbed by the axi_usb_fx3_if module, when Xilinx DMA is not ready to receive data during a packet
- fx32dma_eop signals when the FX3 DMA buffer should be empty. slrd_n set high and sloe_n set low for another two clock cycles
- eot_fx32dma signals the interface that the packet has been fully transfered. No need for watermark signals
- added length_fx32dma and length_dma2fx3 as requested
2016-10-10 10:33:37 +03:00
39fdf11ef3
util_adxcvr- rx/tx clocks
2016-10-05 13:53:02 -04:00
7ec93ce8e0
util_adxcvr: Fix some typo
...
GTHE4_CHANNEL is instantiated in case of XCVR_TYPE == 2
2016-10-05 17:42:12 +03:00
4f587d2e48
util_adxcvr: Delete trailing whitespaces
2016-10-05 17:41:40 +03:00
1b9d2d434c
axi_ad9361_tdd: Delete unused register
2016-10-05 17:41:08 +03:00
ddceff2b5c
axi_usb_fx3: Updated header/footer signature
2016-10-04 16:11:24 +03:00
48dd4880a3
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
0e8551545c
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
b4652650e4
util_adxcvr- xcvr_type parameter
2016-10-03 16:11:45 -04:00
63ddcf1e26
util_adxcvr- synthesis warnings fix
2016-10-03 16:11:45 -04:00
8e0dc859af
axi_usb_fx3: Update
...
- added 1 clock delay for slrd_n signal
- rearrange databytes
2016-10-03 15:17:01 +03:00
43b3761b80
axi_ad9361: Flop the tx and rx valid
2016-10-03 12:24:04 +03:00
8e25bc01b3
all: Change tab to double space
...
Occasional file parsing and restructuring become a pain, if tabs exists
in code. General rule of the repos is tab always a double space.
2016-10-01 18:13:42 +03:00
6b956066ef
xilinx/ad_lvds*- ultrascale+
2016-09-30 11:55:10 -04:00
e9105faae1
library/scripts- add beta devices
2016-09-30 11:55:10 -04:00
c072c2f89a
util_clkdiv: Add IP
2016-09-30 17:13:51 +03:00
7290bcc81a
hdlmake- updates
2016-09-29 11:50:58 -04:00
ffec95f220
ad9371- xcvr updates
2016-09-29 11:50:58 -04:00
b4fac96aad
axi_ad9361- independent disables
2016-09-28 15:45:27 -04:00
f7fb3ccaca
axi_ad9361: Change the data path gating
...
Bring up the datapath gating from the TDD controller module.
2016-09-28 16:36:13 +03:00
df485d7878
axi_ad9684: Fix the PN9 PRBS sequence monitor
2016-09-28 10:47:16 +03:00
9defccef70
dacfifo- axi address map fixes
2016-09-27 14:48:23 -04:00
c98e2e95dd
ad9162- xcvr updates
2016-09-26 15:21:45 -04:00
692cb10fb2
ad9625- xcvr updates
2016-09-26 15:21:11 -04:00
ad16aec101
axi_ad9684: Fix SERDES modules
2016-09-26 11:14:35 +03:00
f6c7aa9005
library- dac parameter changes
2016-09-23 16:15:59 -04:00
1a11e28821
ad9361- dac data path split
2016-09-23 16:13:46 -04:00
6735333aea
common- dac data path split
2016-09-23 16:13:24 -04:00
6837143110
library/ adc parameter changes
2016-09-23 13:44:47 -04:00
7be6168b2e
ad9361- adc data path split
2016-09-23 13:42:14 -04:00
8729af1b91
common- adc- data path disable split
2016-09-23 13:40:35 -04:00
78f7384150
ad9361- vivado synthesis warnings fix
2016-09-22 13:41:18 -04:00
2b6eb1d65e
up_drp: Revert some bit locations
...
Linuxe drivers are checking the drp_locked status even if the
core does not contains a clock generation/managment module. To
not break all the designs, revert all the status and control bits to
there old locations.
2016-09-22 16:32:42 +03:00
21b5e9c634
hdlmake- updates
2016-09-21 11:56:03 -04:00
0def596b43
axi_xcvrlb- updates
2016-09-21 11:04:22 -04:00
d497a7b0ae
axi_xcvrlb- constraints
2016-09-21 11:04:22 -04:00
a21b9fe8ff
up_drp: Fix up_drp_wr
2016-09-21 17:55:58 +03:00
64cd7dc002
axi_ad9122: Update core to the new DRP interface
2016-09-21 16:09:55 +03:00
bae839acd4
axi_ad9739a: Update core to the new DRP interface
2016-09-21 15:23:08 +03:00
781702c1b9
axi_ad9434: Update the core to the new DRP interface
2016-09-21 15:12:59 +03:00
913eafed48
up_drp : Update the DRP interface to support Altera platforms
2016-09-21 15:00:45 +03:00
10408b8c88
up_tdd_cntrl: Set PCORE version to 1.00.a
2016-09-21 10:27:28 +03:00
1860d72df6
axi_xcvrlb- updates
2016-09-19 12:39:59 -04:00
5592c2780e
axi_xcvrlb- loopback version
2016-09-19 12:39:59 -04:00
38f1521861
xilinx/ad_serdes_in : Fix some typos
2016-09-19 16:02:52 +03:00
ff0f659a33
xilinx/ad_serdes_clk : Rename parameter MMCM_DEVICE_TYPE to DEVICE_TYPE
2016-09-19 16:02:06 +03:00
2159f78c80
axi_ad9361: Delete invalid assignment of a generated wire
2016-09-16 17:38:08 +03:00
6510f92c12
ad_serdes : Cosmetic changes
2016-09-16 14:45:39 +03:00
13a35f7a2a
altera/ad_serdes_clk: The IO_PLL reset is active heigh
2016-09-16 14:20:39 +03:00
858ea09048
altera/ad_serdes_in: Fix some typos
2016-09-16 10:56:16 +03:00
a2d15acb89
ad_serdes- altera/xilinx sync
2016-09-15 13:33:55 -04:00
63696c1a28
alt_serdes- data-width parameter
2016-09-15 11:12:18 -04:00
02dfd2d2e2
altera/ad_serdes_out- sample transmit order
2016-09-15 10:28:34 -04:00
5986f45cba
altera/ad_serdes_out- updates
2016-09-15 09:38:11 -04:00
16ee1336c3
Makefile: Update make files
2016-09-15 11:41:06 +03:00
3b0c1e02fc
axi_dacfifo: Move IP to library/xilinx
2016-09-15 11:38:16 +03:00
3cbbc771a8
axi_adcfifo: Move IP to library/xilinx
2016-09-15 11:36:47 +03:00
fe133a7c39
v2001- parameter defines
2016-09-14 15:47:45 -04:00
16046a984c
alt_serdes- updates
2016-09-14 12:05:48 -04:00
4a6b554c0a
ad_serdes- updates
2016-09-14 11:12:53 -04:00
343056b674
axi_usb_fx3: Update IP to work with 2016.2
2016-09-14 15:40:42 +03:00
a0318ae868
ad_serdes_clk- syntax errors
2016-09-13 14:02:11 -04:00
734b39a8ed
alt_serdes: Fix some issues in the _hw.tcl script
2016-09-13 17:42:51 +03:00
bced17a16f
axi_ad9144- qsys updates
2016-09-12 14:57:50 -04:00
01b7662e05
axi_ad9680- qsys updates
2016-09-12 14:57:50 -04:00
c6998dd396
scripts- altera conduit
2016-09-12 14:57:50 -04:00
73ebf1225c
axi_adxcvr- ip/phy split
2016-09-12 14:57:50 -04:00
21545ee83f
avl_adxcvr- ip/phy split
2016-09-12 14:57:50 -04:00
8718b7f477
avl_adxphy- ip/phy split
2016-09-12 14:57:50 -04:00
d30ffdb7e9
avl_adxcfg- ip/phy split
2016-09-12 14:57:50 -04:00
9159e31244
axi_adxcvr- compile fixes
2016-09-12 14:57:50 -04:00
5a309d8863
avl_adxphy- split
2016-09-12 14:57:50 -04:00
2a34f9baa8
alt-serdes, in & out
2016-09-12 11:45:23 -04:00
9e0c39a71b
alt_serdes_clk- changes
2016-09-12 10:30:28 -04:00
f4be0524b4
altera/common: Add SERDES related modules
2016-09-09 18:04:41 +03:00
a183e51a12
axi_ad9361: Add parameter R1_MODE_EN
...
R1_MODE_EN can disable the second I/Q channel of the core. This way
the user can save resources by cutting down the size of the core.
2016-09-09 16:34:11 +03:00
e42206e510
axi_ad9361: Add a TDD enable/disable parameter
2016-09-09 14:38:28 +03:00
be41a8bcaa
axi_ad9361: Delete debug ports of the tdd module
2016-09-09 14:38:28 +03:00
bbcf2a3ec3
axi_ad9434/axi_ad9434_constr: Change constraint file to resolve critical warning
2016-09-01 17:16:59 +03:00
4ae084ee32
avl_adxcvr- compile fixes
2016-09-01 10:06:28 -04:00
5544e3cf10
axi_adxcvr- compile fixes
2016-09-01 10:06:28 -04:00
230f1526c0
avl_adxcfg- compile fixes
2016-09-01 10:06:28 -04:00
b7ea2efa87
altera- xcvr cores
2016-08-29 15:18:48 -04:00
9799599eee
library/ad9361- add dac clk sel
2016-08-26 10:31:00 -04:00
74bc498a6d
library/common- added dac clock select
2016-08-26 10:31:00 -04:00
10b9a0e52f
upadated xcvr ips
2016-08-17 15:51:55 -04:00
6a8ca8107a
common: Added common ad_dcfilter stub for altera.
2016-08-16 17:37:16 +03:00
e754f0a46a
up_axi- writes dropped by delayed w-responses
2016-08-14 11:21:19 -04:00
3427965cd2
adxcvr- add u-gth bufg
2016-08-11 10:00:41 -04:00
bb9cb86f34
adc/dac- fifo constraints
2016-08-11 10:00:41 -04:00
829e4155ca
modified transceiver configuration files
2016-08-10 14:59:38 -04:00
b8f4e1c0aa
updated 9680 hdl files(to resolve a critical warning)
2016-08-10 14:50:31 -04:00
ccf1c56b33
util_upack: Patch up the description of Altera IP
2016-08-08 16:39:56 +03:00
e9ac4a5a0e
util_rfifo: Patch up the description of Altera IP
2016-08-08 16:39:25 +03:00
0cd608a7e2
lib_refactoring: Update Make files
2016-08-08 16:38:38 +03:00
aad8c265bc
lib_refactoring: Fix path for CMOS sources
2016-08-08 15:07:54 +03:00
1d33d7d7ee
lib_refactoring: Move the CMOS interface modules to ~/library/xilinx/common
2016-08-08 15:07:42 +03:00
df36902713
lib_refactoring: Fix path of the IO macros
2016-08-08 15:07:19 +03:00
90ac7b7ac9
lib_refactoring: Move all Altera module to library/altera/common
...
Move all Altera modules to library/altera/common, delete the
deprecated wrapper files
2016-08-08 15:07:01 +03:00
cb9af99c5d
lib_refactoring: Add ad_mul.v for Altera
2016-08-08 15:06:48 +03:00
b806fa3b42
lib_refactoring: Move all the Xilinx common modules to library/xilinx/common
2016-08-08 15:06:10 +03:00
5faf4c4976
cleanup: Don't need Makefiles specific to xilinx/altera libraries. Top Makefile covers them
2016-08-05 16:27:52 +03:00
d60bce654c
Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools
2016-08-05 15:16:04 +03:00
cb23ba8bb7
make- script needs update
2016-08-04 14:17:04 -04:00
e42b4ea378
hdlmake- updates
2016-08-04 13:28:25 -04:00
2b7c976be5
xcvr- altera/xilinx split
2016-08-04 13:26:10 -04:00
cba53774ca
axi_dmac: Don't add CDC constraints when all clocks are synchronous
...
When all clocks are synchronous there are no synchronizers and the
constraint for the CDC registers can't find any cells which generates a
warning. To avoid this don't add CDC constraints when all the clocks are
synchronous.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-02 19:30:24 +02:00
aece3f5555
axi_ad9680: Update IP core
...
- added signals so that AD9680 can be connected to altera's xcvr core through an avalon streaming sink
- added DEVICE_TYPE parameter in _hw.tcl, set to 1 for altera
2016-08-01 15:05:30 +03:00
a0ae791395
hdl-vivado-2016.2: Update axi_jesd_gt
...
Infer AXI bus interfaces separately.
2016-08-01 13:53:18 +03:00
fbe3d75eb0
cosmetics: Delete trailing whitespace characters
2016-08-01 13:46:46 +03:00
b99117e686
up_axi: Same cycle BVALID/READY fails on Altera
...
The Qsys interconnect does not handle the assertion of BVALID on the
same cycle as [A]WREADY. Add a single cycle of delay to prevent
deadlocks.
Similar to:
2817ccdb22
2016-08-01 12:17:10 +03:00
58b220ba81
ad_tdd_control: Add an on/off switch to the receive datapath
...
For a more robust control, add an on/off switch to the receive datapath too,
in order to filter out transition noises.
2016-08-01 11:49:27 +03:00
7988d2c7a2
adi_ip: remove duplicated errored auto address maps & interfaces
2016-07-29 12:32:19 -04:00
4aa506de8d
adxcvr- added a space?
2016-07-29 09:38:08 -04:00
71dad14e0e
axi_adcfifo- disable auto infer mess-up
2016-07-29 09:37:17 -04:00
39ff059ef6
hdl-vivado-2016.2- productivity decimated again!
2016-07-28 13:44:57 -04:00
d5d61ff518
hdl-vivado-2016.2- productivity decimated again!
2016-07-28 13:44:57 -04:00
52b544bb66
hdl-vivado-2016.2- auto infer bus interfaces
2016-07-28 13:44:57 -04:00
3384d384d3
hdl-vivado-2016.2- infer bus interfaces separately
2016-07-28 13:44:57 -04:00
c316f0dfea
ad9144- synthesis warnings fix
2016-07-28 13:44:57 -04:00
8a2734b43e
up_dac_common- typo- unf register reset
2016-07-28 13:44:57 -04:00
6ebb32a194
library axi-slave missing protection signal added
2016-07-22 12:54:27 -04:00
Lars-Peter Clausen
Rejeesh Kutty
Adrian Costina
Istvan Csomortani
AndreiGrozav
Dragos Bogdan
Shrutika Redkar
Matthew Fornero