Commit Graph

5697 Commits (5c87e5b1a7bd9a29fdfbb68badff1e158d29b912)

Author SHA1 Message Date
Lars-Peter Clausen 43e9b0c7a6 common: Disable TTC0 MMIO routing for PS7
We do not use the ttc0 to MMIO routing, but it is enabled by default, so
explicitly disable it.
2014-10-10 16:19:51 +03:00
Lars-Peter Clausen 61be003017 axi_i2s/axi_spdif: Create clock and reset interface for DMA bus
This avoids some critical warnings from Vivado that the DMA bus does not has any associated clocks.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:11:41 +03:00
Lars-Peter Clausen 58cbe1813d scripts/adi_ip: Add helper function to create bus clock and reset interface
Add a helper function that can be used to register a clock and a reset interface for the clock and reset signals of a bus.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:11:31 +03:00
Lars-Peter Clausen a31cb6c475 axi_i2s/axi_spdif: Remove manual creation of Streaming AXI bus
It looks like Vivado is now able to infer these buses from the sources.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:11:06 +03:00
Istvan Csomortani e361bbbd04 Revert "fmcomms2_udc: Initial check in"
This reverts commit ddc7c845e9.
2014-10-10 14:48:55 +03:00
Paul Cercueil 7659f3438c AD9467: Fixup swapped net names
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-10-10 12:33:07 +03:00
Rejeesh Kutty 8964fd33e3 daq1: Clean up dma interface 2014-10-10 12:05:26 +03:00
Paul Cercueil 9798704cc4 DAQ1: Add missing clock line for the AD9250 ADC
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-10-10 09:59:21 +02:00
Rejeesh Kutty adf4893a27 usdrx1: remove constraints and other changes 2014-10-09 15:25:08 -04:00
Rejeesh Kutty 4bdb3cd262 axi_ad9671: altera axi4lite changes 2014-10-09 15:25:07 -04:00
Rejeesh Kutty 6125bbecc3 axi_ad9671: altera axi4lite changes 2014-10-09 15:25:06 -04:00
Rejeesh Kutty 2817ccdb22 up_axi: altera can not handle same clock assertion of arready and rvalid 2014-10-09 15:25:05 -04:00
Istvan Csomortani ddc7c845e9 fmcomms2_udc: Initial check in
FMCOMMS2 with an additional SPI port for the up/down converter board
2014-10-09 19:01:22 +03:00
Istvan Csomortani 6f77af4aff fmcjesdadc1: Upgrade project to 2014.2 2014-10-09 18:55:27 +03:00
Istvan Csomortani 2da395926e fmcomms2: Upgrade project to 2014.2 2014-10-09 18:54:33 +03:00
Istvan Csomortani 4f6aa159b8 mitx045: Base design now support 2014.2 2014-10-09 15:11:28 +03:00
Adrian Costina edeeafa47d ad9671_fmc: Added sof information to the AD9671 driver 2014-10-09 14:52:25 +03:00
Istvan Csomortani 072e11c661 ad9467_fmc: Upgrade the axi_quad_spi core 2014-10-08 15:22:58 +03:00
Paul Cercueil 94e9396557 AD9467: Fixup swapped net names
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-10-08 10:45:32 +02:00
Istvan Csomortani fc38249150 ad9467 ZED: Fix over range signal path, and the dma interface. 2014-10-08 11:24:44 +03:00
Istvan Csomortani 15db557bd6 ad9467 ZED: Cosmetic changes on bd script. 2014-10-08 11:24:32 +03:00
Istvan Csomortani 5565cf8fad axi_ad9467: Independent read/write update
Independent read/write operation is supported on "up" interface
2014-10-08 11:23:44 +03:00
Istvan Csomortani 82717b354a ad9467_fmc : Upgrade project to 2014.2 2014-10-08 11:21:43 +03:00
Istvan Csomortani b2d0260130 ad9467_fmc: Prevent to use concatenation module on SPI interface
This module cause unnecessary issues during version upgrades.
2014-10-08 11:20:45 +03:00
Rejeesh Kutty 88a3b7f8fd library: remove all constraints for now 2014-10-07 16:59:19 -04:00
Rejeesh Kutty 27153fff41 ad9625x2_fmc: updated to 2014.2 2014-10-07 16:05:09 -04:00
Adrian Costina 2dfcb0c599 usdrx1: Initial commit for a5gt
axi_ad9671: added start of frame information to the altera core.
2014-10-07 19:41:54 +03:00
Istvan Csomortani 95842b8949 ad9434_fmc: Fix adc_valid signal path 2014-10-07 18:02:33 +03:00
Istvan Csomortani a436153a48 axi_ad9434: Independent read/write update
Independent read/write is supported on "up" interface.
2014-10-07 18:01:44 +03:00
Istvan Csomortani 115f33b8d6 ad9434_fmc: Fix pin constraints for ZC706 2014-10-07 17:58:29 +03:00
Istvan Csomortani 9404e93126 ad9434_fmc: Fix PN monitor.
No need to flop the incoming data.
2014-10-07 17:56:27 +03:00
Istvan Csomortani c1213ffe71 ad9434_fmc: Fix SPI interface 2014-10-07 17:51:14 +03:00
Istvan Csomortani 66baf6ac3e axi_ad9434: Deleted unused ip file
ad_lvds_in.v is not used in this ip core.
2014-10-07 17:47:08 +03:00
Istvan Csomortani bfa17844ff ad_serdes_in: General update
Added a parameter for option SDR / DDR mode, added a parameter for parallel data width.
Note: default IF_TYPE is SDR and default PARALLEL_WIDTH is 8
2014-10-07 17:42:27 +03:00
Lars-Peter Clausen 151781a2af axi_ad9467: Fix PN sequence checker
Make sure that the reference PN sequence is only incremented every two clock
cycles to make sure that it matches the rate of the ADC PN sequence.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-07 16:26:53 +03:00
Istvan Csomortani 59640f181b ad9467: Fix LVDS delay interface. 2014-10-07 16:25:22 +03:00
Michael Hennerich af618073a6 projects/common/xxx/xxx_system_bd.tcl: 'Update microblaze defaults
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-10-07 09:18:47 +02:00
Michael Hennerich cd42345324 projects/common/xxx/xxx_system_bd.tcl: 'Update microblaze defaults
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-10-07 09:17:24 +02:00
Rejeesh Kutty bca8ec0160 daq2: 2014.2 and ver.d 2014-10-06 14:56:01 -04:00
Rejeesh Kutty c375b5b26e daq3: vivado build 2014-10-06 10:34:02 -04:00
Rejeesh Kutty d47776a4a0 ad9152: 9144 copy 2014-10-06 10:34:01 -04:00
Rejeesh Kutty 525373fc04 daq3: daq2 copy 2014-10-06 10:34:00 -04:00
Lars-Peter Clausen 0539bc36c8 axi_ad9467: Fix PN sequence checker
Make sure that the reference PN sequence is only incremented every two clock
cycles to make sure that it matches the rate of the ADC PN sequence.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-06 16:19:01 +02:00
Lars-Peter Clausen b029d07adf common: Connect audio clkgen reset
While we are at it also hide the unused locked pin.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-06 16:17:33 +02:00
Lars-Peter Clausen 54053e0d87 common: Set cpu interconnect strategy to minimize area
There will rarely be concurrent access to the peripheral control bus
interconnect, so there is no need to optimize for performace. Setting the
interconnect strategy to minimize area can reduce the resource usage by
~90%.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-06 16:17:33 +02:00
Lars-Peter Clausen 1defad36b8 fmcomms1: Connect DMA controller directly to the HP ports
The AXI DMAC controller nativly supports AXI3, there is no need to insert a interconnect to do protocol conversion.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-06 16:17:33 +02:00
Rejeesh Kutty 210da4116f scripts: initial commit 2014-10-03 16:13:34 -04:00
Adrian Costina 581892b22a axi_ad9265: Updated project with new up independent read/write 2014-10-03 12:32:08 +03:00
Rejeesh Kutty de33722470 up/constr: independent read/write and local constraints 2014-10-02 14:35:59 -04:00
Istvan Csomortani 801f12f373 ad9467: Fix LVDS delay interface. 2014-10-02 11:34:37 +03:00