54f341fad8
scripts: sdk export before timing check
2014-10-27 09:59:52 -04:00
4494998940
scripts: ignore another variant of reset warning
2014-10-27 09:59:51 -04:00
10b898a62d
zed_base: Fix IRQ layout.
...
Just a temporally fix of IRQ layout.
2014-10-27 14:46:26 +02:00
3645139e59
fmcomms6: Avoiding redefinition of system clocks.
2014-10-23 12:55:56 +03:00
dd5d57843d
fmcomms6: Update version of the ILA core
2014-10-23 12:30:55 +03:00
3dbfa8cda6
ad9434_fmc: Fix PN monitor and device interrupt
2014-10-23 11:29:14 +03:00
24e11b30b9
ad7175_zed: added the ad7175 ZED project
2014-10-23 06:15:17 +03:00
20d59ce39b
daq2: dma fifo modifications
2014-10-22 16:39:28 -04:00
4eeb50114f
daq2: rebase conflicts
2014-10-22 16:39:17 -04:00
43cdafe1e2
kcu105: iic-rstn removed
2014-10-22 16:33:52 -04:00
dcdba475f7
vc707_common: Fix net name sys_100m_resetn
2014-10-22 15:41:36 +03:00
a0d27a117c
usdrx1: Updated project with new synchronization mechanism. Fixed timing constraints
2014-10-22 13:20:44 +03:00
cd9033296c
ad9671_fmc: Fixed constraint files
2014-10-22 13:14:59 +03:00
17675863e0
all_projects: Fix the interrupt connections to preserve IRQ layout
2014-10-22 11:48:08 +03:00
767179dce9
adv7511_zc706: Fix IRQ layout
...
Fix IRQ connection, this layout works on Linux
2014-10-21 17:44:28 +03:00
8a4ab4e05a
projects/ad9434_fmc/common/ad9434_bd.tcl: Fix freeze - Design doesn't use SYNC
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-10-21 15:03:55 +02:00
d4a21d9775
ad9625_fmc: constraints fix
2014-10-20 10:00:39 -04:00
b3c784f76a
ad9467_fmc: Made some cosmetic changes on the block design script.
2014-10-20 13:28:34 +03:00
4b8720b551
fmcomms2_zc706: Remove top level constraints
...
Remove all the unnecessary top level constraint definitions.
2014-10-20 13:25:01 +03:00
7115864b4c
ad9434_fmc: Remove top level constraints
...
Remove all the unnecessary top level constraint definitions.
2014-10-20 13:23:37 +03:00
5deffd57b1
zed: Remove top level constraints
...
Remove top level constraints from the ZED base design.
2014-10-20 13:20:27 +03:00
0c56e5b912
ad9434_fmc: Fix GPIO width
...
GPIO port width is 15 instead of 32
2014-10-20 10:59:30 +03:00
7f8270d74b
ad9625_fmc: generic dma fifo for zynq and non-zynq boards
2014-10-17 14:38:16 -04:00
0b30f98640
ad9625_fmc/zc706: remove top level constraints
2014-10-17 14:38:15 -04:00
f3c9627cae
adi_project: demote reset warnings to info
2014-10-17 14:38:13 -04:00
14ccdaaa78
kcu105: removed spdif reset
2014-10-17 14:00:00 -04:00
380eeec013
daq2/kcu105: ethernet fix
2014-10-17 13:48:35 -04:00
fca0714478
adv7511/kcu105: ethernet fix
2014-10-17 13:48:33 -04:00
e73b3b52dc
kcu105: ethernet fix
2014-10-17 13:47:50 -04:00
2600b1f359
daq3: tx interleave and dma fifo axi streaming
2014-10-15 14:51:04 -04:00
6d76e0b768
zc706: remove top level constraints
2014-10-15 14:51:02 -04:00
5715c5b28f
dmafifo: axi stream interface
2014-10-15 14:50:57 -04:00
0aed11fa6c
adi_project: demote useless warnings
2014-10-15 14:50:54 -04:00
4d4a7981f2
fmcomms1: Connect DMA controller directly to the HP ports
...
The AXI DMAC controller nativly supports AXI3, there is no need to insert a interconnect to do protocol conversion.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:46:07 +03:00
7d3be14ab5
common: Connect audio clkgen reset
...
While we are at it also hide the unused locked pin.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:44:46 +03:00
fd89458708
common: Set cpu interconnect strategy to minimize area
...
There will rarely be concurrent access to the peripheral control bus
interconnect, so there is no need to optimize for performace. Setting the
interconnect strategy to minimize area can reduce the resource usage by
~90%.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:43:54 +03:00
d2a04856a9
common: Fix xlconstant output pin name
...
On 2014.2 xlconstant output pin name is 'dout'.
2014-10-15 15:37:06 +03:00
02802644bf
fmcjesdadc1: Fix a few warning and issue with ILA
...
+ GPIO width is 15
+ Fix ILA core
2014-10-15 15:37:05 +03:00
865cbab3a2
ad9671_fmc: Updated a5gt project with start of frame information
2014-10-15 10:53:33 +03:00
8934a66013
usdrx1: Update project so that the AD9671 cores can be synchronized
2014-10-13 17:06:40 +03:00
f528873fa9
fmcomms2: Add an additional SPI interface for up/down converter board
...
Supported carriers are: ZC706, ZC702 and Zed.
2014-10-10 18:47:07 +03:00
ca4c961891
fmcomms2: Use ad_iobuf instance on system_top
...
Use ad_iobuf instance on system top, instead of separate IOBUF instances.
2014-10-10 18:45:39 +03:00
e21d26e456
fmcomms2: Cosmetic changes
...
Get rid of unwanted whitespaces.
2014-10-10 18:25:17 +03:00
fe8a076b2e
fmcomms2: Cosmetic changes on *_bd.tcl script
2014-10-10 17:06:32 +03:00
7a9e694446
fmcomms2: Connect DMA directly to the HP ports
...
The DMA controller is able to send AXI3 compatible requests, no need to add
a interconnect for protocol conversion in between the DMA controller and the
HP port.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:14 +03:00
87047fd83e
fmcomms2: Set dac_unpack channels to 4
...
There are only 4 DAC channels in the fmcomms2 design, so set the number of
channels of the dac_unpack core to 4. This slightly reduces resource usage
as well as reducing the DMA alignment requirement from 128bit to 64bit. The
later value is what existing applications expect the alignement requirement
to be.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:06 +03:00
43e9b0c7a6
common: Disable TTC0 MMIO routing for PS7
...
We do not use the ttc0 to MMIO routing, but it is enabled by default, so
explicitly disable it.
2014-10-10 16:19:51 +03:00
e361bbbd04
Revert "fmcomms2_udc: Initial check in"
...
This reverts commit ddc7c845e9
2014-10-10 14:48:55 +03:00
7659f3438c
AD9467: Fixup swapped net names
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-10-10 12:33:07 +03:00
adf4893a27
usdrx1: remove constraints and other changes
2014-10-09 15:25:08 -04:00
Rejeesh Kutty
Istvan Csomortani
acozma
Adrian Costina
Michael Hennerich
Lars-Peter Clausen
Paul Cercueil