Commit Graph

13 Commits (4b8f3f06f7763410bdc5be21a1cf82e9d4d1f3fd)

Author SHA1 Message Date
Ionut Podgoreanu 455bfbcafb pluto: Enable phaser integration
This commit adds support for ADALM-PHASER, allowing the user to choose between the default PlutoSDR mode and Phaser mode
through a software controlled GPIO pin: phaser_enable.

The Generic TDD Engine was integrated to output a logic signal on the L10P pin, which connects to the input of the ADF4159,
when receiving an external synchronization signal on the L12N pin from the Raspberry Pi. Two additional TDD channels are used
to synchronize the TX/RX DMA transfer start:
- TDD CH1 is connected to the RX DMA, triggering the synchronization flag;
- TDD CH2 is connected to the TX unpacker's reset, backpressuring the TX DMA until deasserted.

Signed-off-by: Ionut Podgoreanu <ionut.podgoreanu@analog.com>
2023-10-06 14:20:22 +03:00
Iulia Moldovan c9a7d4d927 Add copyright and license to .tcl, .ttcl files
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-25 15:22:26 +03:00
Bogdan Luncan 72313df81f Updated the makefiles to build the projects in subdirectories based on the build parameters.
Running 'make' will build the default project directly in the project folder (like it did before)
Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory.
Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory.
Running 'make clean' will clean the default project only.
Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build.
Running 'make clean-all' will delete all the built configurations and libraries.

Note that the 'JESD' and 'LANE' words from the parameter names are stripped.

Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
2022-11-14 09:38:42 +02:00
Adrian Costina f2ca956d23 pluto: Fix dunf connection 2021-08-05 18:08:12 +03:00
AndreiGrozav db5e21cfb9 pluto revC: Add second RF channel
-add second RF channel (without fir filters)
-use a more generic instantiation of the fir filters
-add util_cpack2 and util_upack2
2020-01-16 11:40:28 +02:00
AndreiGrozav f9c8ff26cf pluto rev C hardware updates
-connect axi_spi to board GPIOs
-connect axi IIC to board GPIOs

MIO49 SPI_CS   (PS MIO49)
L10P  SPI_MOSI (AXI_SPI)
L12N  SPI_MISO (AXI_SPI)
L24N  SPI_CLK  (AXI_SPI)
L7N   iic_sda  (AXI_IIC)
L9N   iic_scl  (AXI_IIC)
2020-01-16 11:40:28 +02:00
AndreiGrozav a4547a32b6 pluto: Clean old interrupt connections style 2019-10-18 18:28:01 +03:00
AndreiGrozav 4aa3e94089 pluto: Fix the adc/dac dma mapping to ps7 S_AXI_HP1/S_AXI_HP2
After the previous commit that removed the interconnects from HP ports
in order to reduce utilization. The directly connected DMAs were not
assigned to a specific range and address.
2019-05-27 17:20:44 +03:00
Adrian Costina 844a848d2d pluto: Removed interconnects to HP ports to reduce utilization 2019-04-15 17:49:11 +03:00
Adrian Costina c419b0042b pluto: ip automatic version update 2017-04-14 16:55:07 +03:00
Rejeesh Kutty 9b6dd27c23 ad9361- delay initialization 2017-03-15 12:06:59 -04:00
Adrian Costina a569b6bf0c pluto: Interpolation, connect fifo_rd_valid to s_axis_data_tvalid 2017-02-13 18:08:52 +02:00
Rejeesh Kutty 2ececad58c sdrstk-2-pluto 2016-11-11 13:49:04 -05:00