Commit Graph

313 Commits (4788d09620c0bb0eb80462bdd1e1759a3925b609)

Author SHA1 Message Date
Istvan Csomortani d2a04856a9 common: Fix xlconstant output pin name
On 2014.2 xlconstant output pin name is 'dout'.
2014-10-15 15:37:06 +03:00
Istvan Csomortani 02802644bf fmcjesdadc1: Fix a few warning and issue with ILA
+ GPIO width is 15
+ Fix ILA core
2014-10-15 15:37:05 +03:00
Adrian Costina 865cbab3a2 ad9671_fmc: Updated a5gt project with start of frame information 2014-10-15 10:53:33 +03:00
Adrian Costina 8934a66013 usdrx1: Update project so that the AD9671 cores can be synchronized 2014-10-13 17:06:40 +03:00
Istvan Csomortani f528873fa9 fmcomms2: Add an additional SPI interface for up/down converter board
Supported carriers are: ZC706, ZC702 and Zed.
2014-10-10 18:47:07 +03:00
Istvan Csomortani ca4c961891 fmcomms2: Use ad_iobuf instance on system_top
Use ad_iobuf instance on system top, instead of separate IOBUF instances.
2014-10-10 18:45:39 +03:00
Istvan Csomortani e21d26e456 fmcomms2: Cosmetic changes
Get rid of unwanted whitespaces.
2014-10-10 18:25:17 +03:00
Istvan Csomortani fe8a076b2e fmcomms2: Cosmetic changes on *_bd.tcl script 2014-10-10 17:06:32 +03:00
Lars-Peter Clausen 7a9e694446 fmcomms2: Connect DMA directly to the HP ports
The DMA controller is able to send AXI3 compatible requests, no need to add
a interconnect for protocol conversion in between the DMA controller and the
HP port.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:14 +03:00
Lars-Peter Clausen 87047fd83e fmcomms2: Set dac_unpack channels to 4
There are only 4 DAC channels in the fmcomms2 design, so set the number of
channels of the dac_unpack core to 4. This slightly reduces resource usage
as well as reducing the DMA alignment requirement from 128bit to 64bit.  The
later value is what existing applications expect the alignement requirement
to be.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:06 +03:00
Lars-Peter Clausen 43e9b0c7a6 common: Disable TTC0 MMIO routing for PS7
We do not use the ttc0 to MMIO routing, but it is enabled by default, so
explicitly disable it.
2014-10-10 16:19:51 +03:00
Istvan Csomortani e361bbbd04 Revert "fmcomms2_udc: Initial check in"
This reverts commit ddc7c845e9.
2014-10-10 14:48:55 +03:00
Paul Cercueil 7659f3438c AD9467: Fixup swapped net names
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-10-10 12:33:07 +03:00
Rejeesh Kutty adf4893a27 usdrx1: remove constraints and other changes 2014-10-09 15:25:08 -04:00
Istvan Csomortani ddc7c845e9 fmcomms2_udc: Initial check in
FMCOMMS2 with an additional SPI port for the up/down converter board
2014-10-09 19:01:22 +03:00
Istvan Csomortani 6f77af4aff fmcjesdadc1: Upgrade project to 2014.2 2014-10-09 18:55:27 +03:00
Istvan Csomortani 2da395926e fmcomms2: Upgrade project to 2014.2 2014-10-09 18:54:33 +03:00
Istvan Csomortani 4f6aa159b8 mitx045: Base design now support 2014.2 2014-10-09 15:11:28 +03:00
Adrian Costina edeeafa47d ad9671_fmc: Added sof information to the AD9671 driver 2014-10-09 14:52:25 +03:00
Istvan Csomortani 072e11c661 ad9467_fmc: Upgrade the axi_quad_spi core 2014-10-08 15:22:58 +03:00
Istvan Csomortani fc38249150 ad9467 ZED: Fix over range signal path, and the dma interface. 2014-10-08 11:24:44 +03:00
Istvan Csomortani 15db557bd6 ad9467 ZED: Cosmetic changes on bd script. 2014-10-08 11:24:32 +03:00
Istvan Csomortani 82717b354a ad9467_fmc : Upgrade project to 2014.2 2014-10-08 11:21:43 +03:00
Istvan Csomortani b2d0260130 ad9467_fmc: Prevent to use concatenation module on SPI interface
This module cause unnecessary issues during version upgrades.
2014-10-08 11:20:45 +03:00
Rejeesh Kutty 27153fff41 ad9625x2_fmc: updated to 2014.2 2014-10-07 16:05:09 -04:00
Adrian Costina 2dfcb0c599 usdrx1: Initial commit for a5gt
axi_ad9671: added start of frame information to the altera core.
2014-10-07 19:41:54 +03:00
Istvan Csomortani 95842b8949 ad9434_fmc: Fix adc_valid signal path 2014-10-07 18:02:33 +03:00
Istvan Csomortani 115f33b8d6 ad9434_fmc: Fix pin constraints for ZC706 2014-10-07 17:58:29 +03:00
Istvan Csomortani c1213ffe71 ad9434_fmc: Fix SPI interface 2014-10-07 17:51:14 +03:00
Michael Hennerich cd42345324 projects/common/xxx/xxx_system_bd.tcl: 'Update microblaze defaults
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-10-07 09:17:24 +02:00
Rejeesh Kutty bca8ec0160 daq2: 2014.2 and ver.d 2014-10-06 14:56:01 -04:00
Rejeesh Kutty c375b5b26e daq3: vivado build 2014-10-06 10:34:02 -04:00
Rejeesh Kutty 525373fc04 daq3: daq2 copy 2014-10-06 10:34:00 -04:00
Rejeesh Kutty 210da4116f scripts: initial commit 2014-10-03 16:13:34 -04:00
Rejeesh Kutty f0927afd0b ad9625_fmc: add dma fifo for non-zynq 2014-10-01 14:51:14 -04:00
Adrian Costina 89964be59e fmcomms1: Updated project to vivado 2014.2 2014-09-30 10:32:18 +03:00
Adrian Costina 041d8faaf7 common: Updated common projects for ac701/kc702/zc702/zed to vivado 2014.2 2014-09-30 10:31:00 +03:00
Rejeesh Kutty 922bc6f03a fmcadc3: 16bit - but ignored 4 lsb(s) 2014-09-29 15:26:30 -04:00
Adrian Costina 3c25c1171d fmcomms1: Fixed missing sample issue on ZC706. Added modifications for all other platforms 2014-09-26 10:28:07 -04:00
Istvan Csomortani 87c4c73e22 ad9434: Fix adc_clk constraint
ADC clock is 500 Mhz.
2014-09-25 16:54:06 +03:00
Istvan Csomortani 82ed885b53 ad9434: Fix SPI line physical constraints
SPI lines are not differential.
2014-09-25 16:53:16 +03:00
Istvan Csomortani ccb0b135ca ad9434: Fix the adc to dma interface.
All the device2dma interfaces needs to have a generic form : (data, enable, valid)/channel
2014-09-25 16:50:09 +03:00
Istvan Csomortani 683561b67d AD9434: Initial check in of the library and project with ZC706 2014-09-24 18:27:17 +03:00
Adrian Costina 1d4bc47cea ad9265: Initial commit 2014-09-23 22:51:42 -04:00
acostina 296983707b usdrx1: Updated project to 2014.2 2014-09-23 22:45:50 -04:00
acostina 5af2474d51 usdrx1: axi_ad9671 / axi_jesd_gt added signal for frame synchronization 2014-09-23 22:44:33 -04:00
Adrian Costina bdf01738a1 ultrasound: disconnected ADN4670 chips from SPI lines.
Connected everything to ground so that the the clock selected is 0 and all outputs are enabled
2014-09-23 22:30:42 -04:00
Adrian Costina 7e40f99fe9 fmcomms2: Improved constraints for ac701 and zc702. Fixed common design so that ILA works correctly on microblaze based systems 2014-09-23 22:28:27 -04:00
Rejeesh Kutty 577441bd0c daq1: clean up dma interfaces 2014-09-23 14:23:41 -04:00
Rejeesh Kutty 7c98a783c5 2014.2 updates 2014-09-23 12:32:33 -04:00
Rejeesh Kutty 1682d9da10 fmcadc3: initial updates 2014-09-22 11:27:17 -04:00
Rejeesh Kutty 5e3076d770 fmcadc3: daq2 copy 2014-09-22 11:27:16 -04:00
Istvan Csomortani dd7bac41c1 daq1 : Update project to 2014.2
- Cores are upadted
  - Concat module does not swap output anymore
  - Clock signal name ps7_clk_* changed to clk_fpga_*
2014-09-22 17:33:50 +03:00
Istvan Csomortani f2cd7626f5 adi_project : ZC706 board name changed on 2014.2 2014-09-22 17:33:49 +03:00
Rejeesh Kutty fb5d212370 daq2/kcu105: fixed timing violations 2014-09-19 15:55:42 -04:00
Istvan Csomortani 751bdd6cfc daq1: Update the constraint file
- tx_ref_clk and rx_sysref need to be differential
  - cosmetic changes
2014-09-19 18:22:57 +03:00
Adrian Costina f43b5d707e fmcomms2: Reduced clock frequency for ILA to meet timing for ZED
Modified ZED constraints to 250 MHz for the clock from AD9361
2014-09-16 16:08:28 -04:00
Adrian Costina d33fb07587 usdrx1: Modified the GPIO assignments so that board specific GPIOs start from GPIO 32.
GPIOs for which the directions is known, have been specifically assigned.

The SPI clock has been changed to a lower frequency.
2014-09-16 15:56:19 -04:00
Adrian Costina d4db53c3b0 usdrx1_spi: Modified module to be compatible with altera 2014-09-16 15:53:11 -04:00
Michael Hennerich a3dbd5ac00 projects/common/vc707/vc707_system_bd: AD9625_FMC update to 2014.2
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-09-16 14:59:36 +02:00
Istvan Csomortani a91f4bb6b9 daq1: General updates
- Add additional GT setups
- Use channel PLL instead of quad PLL
- Add additional ILA probes for debug
2014-09-13 00:23:11 +03:00
Lars-Peter Clausen d8651cdd2e fmcomms2: c5soc: Set dac_util_unpack number of channels to 4
We only do have 4 channels in this design. Reducing the number of supported
channels for the dac_util_unpack core to 4 from 8 lowers the DMA alignment
requirement from 128bit to 64bit.  We need this since applications only
expect a DMA alignment requirement of 64bit.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-12 16:15:12 +02:00
Lars-Peter Clausen ecc498313c fmcomms2: c5soc: Connect ADC, DAC and VGA DMA to different bridge interconnects
We have enough bridge interconnect to give each DMA its own, so use them.
This makes sure that they do not interfere with each others transfers to
much. The SDRAM controller side of the FPGA2SDRAM bridges FIFO runs at a
much faster frequency then what we are able to use in the fabric. So its
better to do the arbitration on that side of the bus to make sure that we
can utilize the buses in the FPGA fabric to the maximum for each DMA core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-12 16:14:07 +02:00
Adrian Costina 61f21a17b3 fmcomms2:c5soc project upgraded with util_dac_unpack 2014-09-11 15:13:09 -04:00
Lars-Peter Clausen 4c1c50788e fmcomms5: c5soc: Fix typo
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 17:15:10 +02:00
Lars-Peter Clausen 41cc92ef49 Remove BASEADDR/HIGHADDR parameters
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
Michael Hennerich 647a26e19c projects/common/vc707/vc707_system_bd.tcl: Select Linux MMU settings 2014-09-10 17:40:36 +02:00
Lars-Peter Clausen c7989925c5 fmcomms2: c5soc: Add false path between 50MHz and VGA PLL clock
Otherwise we get timing errors for the reset signal that is generated in the
50MHz clock domain, but used in the VGA PLL clock domain.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-09 15:05:06 +02:00
Lars-Peter Clausen 328205c31d fmcomms2: c5soc: Set DMA transfer length to 24 bits
14 bits is a bit to low and we use 24 bits everywhere else as well.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-09 15:05:06 +02:00
Lars-Peter Clausen 50faf0c53a Remove executable flags from non-exectuable files 2014-09-09 15:05:06 +02:00
Rejeesh Kutty b58e425b44 daq2/kcu105: timing improvement -register slices hang 2014-09-08 10:24:56 -04:00
acozma 6e389b8c47 motor_control: Updated the FOC IP and the encoder connections to the IP 2014-09-06 15:58:03 +03:00
Rejeesh Kutty 669462e0f6 ad9625x2: updates on pcores 2014-09-05 12:25:43 -04:00
Rejeesh Kutty 72f31370ef a5gt: ethernet-fpga lvds mode 2014-09-04 11:19:25 -04:00
Rejeesh Kutty 3deb55bb98 a5gt: ethernet i/o changed to lvds 2014-09-04 11:19:24 -04:00
Adrian Costina dfb94f7b68 motor_control: Modified foc_controller to be compatible with other cores 2014-09-03 12:09:37 +03:00
Istvan Csomortani 9f3461b130 fmcjesdadc1: Added support for KC705 2014-09-02 18:02:25 +03:00
Istvan Csomortani 17122661d2 fmcomms2_pr: Fix file path on ZC706/system_bd.tcl 2014-09-01 18:49:55 +03:00
Istvan Csomortani 2ce7695bf7 fmcjesdadc1: Initial commit of VC707 version 2014-09-01 18:47:01 +03:00
Istvan Csomortani 9a80fec4e4 fmcjesdadc1: Delete trailing whitespaces 2014-09-01 18:45:20 +03:00
acozma d08d0cd70b motor_control: added the MW FOC IP and updated the design 2014-09-01 18:35:21 +03:00
Istvan Csomortani ee752ec08a daq1: Initial commit 2014-09-01 18:34:31 +03:00
Adrian Costina a773cc4992 usdrx1: updated project
ad_jesd_align wasa updated to be able to work with frames that have more than 4 octets per frame
2014-09-01 15:18:39 +03:00
Adrian Costina 95c143412d fmcomms2: Modified design to work with 4 channel util_adc_pack 2014-08-29 13:53:59 +03:00
Rejeesh Kutty da913864c9 ad9671_fmc: updates to match recent core changes 2014-08-28 13:16:52 -04:00
dbogdan 5a42c10233 projects/fmcomms2/c5soc: Added video output. HPS SPI was replaced by 3 Wire SPI. 2014-08-27 21:46:23 +03:00
Rejeesh Kutty c435edf194 ad9652/zc706: fix dma write 2014-08-27 10:44:39 -04:00
Rejeesh Kutty 7b280b3bbf fmcomms6: zc706 build-only version 2014-08-27 10:44:37 -04:00
Rejeesh Kutty 0e909647b4 fmcomms6: initial checkin 2014-08-27 10:44:36 -04:00
Adrian Costina a49eb5853b ZED, ZC702: Added contraints so that projects can successfully synthesize on linux systems
For ZC706 Fixed one constraint which was not correct
2014-08-26 16:28:41 +03:00
Rejeesh Kutty 5f21f54463 fmcjesdadc1: zc706 version 2014-08-25 14:28:57 -04:00
Rejeesh Kutty cb29b83b05 a5gt: updates to match a5gt 2014-08-25 10:46:59 -04:00
Rejeesh Kutty 76ffb939e5 zc706: ad9625 copy 2014-08-22 11:24:24 -04:00
Rejeesh Kutty fe1eaefcff fmcomms1: zc706 2014-08-22 09:08:55 -04:00
Rejeesh Kutty 280260e54c c5soc: dmac separated slave and master id widths 2014-08-22 09:08:54 -04:00
Rejeesh Kutty f3f8414d81 kcu105: changes for ad_iobuf 2014-08-15 15:01:52 -04:00
Rejeesh Kutty b481df0b5f library: local constraints async groups 2014-08-14 15:09:51 -04:00
Rejeesh Kutty 39bb7ca231 a5soc: fmcjesdadc1+hdmi version 2014-08-14 09:05:38 -04:00
Lars-Peter Clausen a54e4edb08 Add xfest14 PMODs project
This project has a SPI controller connected to each of the ZED boards PMOD
ports JA, JB, JC, JD pin 1-4. Pin 7-10 are connected to the PS7 general purpose
GPIOs, except for JC where it is connected to the PS7 UART controller.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-08-12 10:14:16 +02:00
Rejeesh Kutty 96969079ce a5soc: fixes for 14.0 and spi conflicts 2014-08-11 16:46:37 -04:00