Istvan Csomortani
74e6e3df0f
ad9467 ZED: Fix over range signal path, and the dma interface.
2014-09-29 12:56:09 +03:00
Istvan Csomortani
889a6565ea
ad9467 ZED: Cosmetic changes on bd script.
2014-09-29 12:51:46 +03:00
Adrian Costina
bc93a15229
fmcomms1: Fixed missing sample issue on ZC706. Added modifications for all other platforms
2014-09-25 15:25:26 -04:00
Adrian Costina
09387431dd
fmcomms2: Improved constraints for ac701 and zc702. Fixed common design so that ILA works correctly on microblaze based systems
2014-09-22 14:40:11 -04:00
Adrian Costina
aa8635ea94
Merge branch 'master' of https://github.com/analogdevicesinc/hdl
2014-09-22 14:39:08 -04:00
Rejeesh Kutty
07f5795255
fmcadc3: initial updates
2014-09-22 11:17:52 -04:00
Rejeesh Kutty
0cb7567110
fmcadc3: daq2 copy
2014-09-22 11:17:51 -04:00
Adrian Costina
cead3aaf86
ultrasound: disconnected ADN4670 chips from SPI lines.
...
Connected everything to ground so that the the clock selected is 0 and all outputs are enabled
2014-09-22 11:09:53 -04:00
Rejeesh Kutty
fb5d212370
daq2/kcu105: fixed timing violations
2014-09-19 15:55:42 -04:00
Istvan Csomortani
751bdd6cfc
daq1: Update the constraint file
...
- tx_ref_clk and rx_sysref need to be differential
- cosmetic changes
2014-09-19 18:22:57 +03:00
Adrian Costina
f43b5d707e
fmcomms2: Reduced clock frequency for ILA to meet timing for ZED
...
Modified ZED constraints to 250 MHz for the clock from AD9361
2014-09-16 16:08:28 -04:00
Adrian Costina
d33fb07587
usdrx1: Modified the GPIO assignments so that board specific GPIOs start from GPIO 32.
...
GPIOs for which the directions is known, have been specifically assigned.
The SPI clock has been changed to a lower frequency.
2014-09-16 15:56:19 -04:00
Adrian Costina
d4db53c3b0
usdrx1_spi: Modified module to be compatible with altera
2014-09-16 15:53:11 -04:00
Michael Hennerich
a3dbd5ac00
projects/common/vc707/vc707_system_bd: AD9625_FMC update to 2014.2
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-09-16 14:59:36 +02:00
Istvan Csomortani
a91f4bb6b9
daq1: General updates
...
- Add additional GT setups
- Use channel PLL instead of quad PLL
- Add additional ILA probes for debug
2014-09-13 00:23:11 +03:00
Lars-Peter Clausen
d8651cdd2e
fmcomms2: c5soc: Set dac_util_unpack number of channels to 4
...
We only do have 4 channels in this design. Reducing the number of supported
channels for the dac_util_unpack core to 4 from 8 lowers the DMA alignment
requirement from 128bit to 64bit. We need this since applications only
expect a DMA alignment requirement of 64bit.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-12 16:15:12 +02:00
Lars-Peter Clausen
ecc498313c
fmcomms2: c5soc: Connect ADC, DAC and VGA DMA to different bridge interconnects
...
We have enough bridge interconnect to give each DMA its own, so use them.
This makes sure that they do not interfere with each others transfers to
much. The SDRAM controller side of the FPGA2SDRAM bridges FIFO runs at a
much faster frequency then what we are able to use in the fabric. So its
better to do the arbitration on that side of the bus to make sure that we
can utilize the buses in the FPGA fabric to the maximum for each DMA core.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-12 16:14:07 +02:00
Adrian Costina
61f21a17b3
fmcomms2:c5soc project upgraded with util_dac_unpack
2014-09-11 15:13:09 -04:00
Lars-Peter Clausen
4c1c50788e
fmcomms5: c5soc: Fix typo
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 17:15:10 +02:00
Lars-Peter Clausen
41cc92ef49
Remove BASEADDR/HIGHADDR parameters
...
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
Michael Hennerich
647a26e19c
projects/common/vc707/vc707_system_bd.tcl: Select Linux MMU settings
2014-09-10 17:40:36 +02:00
Lars-Peter Clausen
c7989925c5
fmcomms2: c5soc: Add false path between 50MHz and VGA PLL clock
...
Otherwise we get timing errors for the reset signal that is generated in the
50MHz clock domain, but used in the VGA PLL clock domain.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-09 15:05:06 +02:00
Lars-Peter Clausen
328205c31d
fmcomms2: c5soc: Set DMA transfer length to 24 bits
...
14 bits is a bit to low and we use 24 bits everywhere else as well.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-09 15:05:06 +02:00
Lars-Peter Clausen
50faf0c53a
Remove executable flags from non-exectuable files
2014-09-09 15:05:06 +02:00
Rejeesh Kutty
b58e425b44
daq2/kcu105: timing improvement -register slices hang
2014-09-08 10:24:56 -04:00
acozma
6e389b8c47
motor_control: Updated the FOC IP and the encoder connections to the IP
2014-09-06 15:58:03 +03:00
Rejeesh Kutty
669462e0f6
ad9625x2: updates on pcores
2014-09-05 12:25:43 -04:00
Rejeesh Kutty
72f31370ef
a5gt: ethernet-fpga lvds mode
2014-09-04 11:19:25 -04:00
Rejeesh Kutty
3deb55bb98
a5gt: ethernet i/o changed to lvds
2014-09-04 11:19:24 -04:00
Adrian Costina
dfb94f7b68
motor_control: Modified foc_controller to be compatible with other cores
2014-09-03 12:09:37 +03:00
Istvan Csomortani
9f3461b130
fmcjesdadc1: Added support for KC705
2014-09-02 18:02:25 +03:00
Istvan Csomortani
17122661d2
fmcomms2_pr: Fix file path on ZC706/system_bd.tcl
2014-09-01 18:49:55 +03:00
Istvan Csomortani
2ce7695bf7
fmcjesdadc1: Initial commit of VC707 version
2014-09-01 18:47:01 +03:00
Istvan Csomortani
9a80fec4e4
fmcjesdadc1: Delete trailing whitespaces
2014-09-01 18:45:20 +03:00
acozma
d08d0cd70b
motor_control: added the MW FOC IP and updated the design
2014-09-01 18:35:21 +03:00
Istvan Csomortani
ee752ec08a
daq1: Initial commit
2014-09-01 18:34:31 +03:00
Adrian Costina
a773cc4992
usdrx1: updated project
...
ad_jesd_align wasa updated to be able to work with frames that have more than 4 octets per frame
2014-09-01 15:18:39 +03:00
Adrian Costina
95c143412d
fmcomms2: Modified design to work with 4 channel util_adc_pack
2014-08-29 13:53:59 +03:00
Rejeesh Kutty
da913864c9
ad9671_fmc: updates to match recent core changes
2014-08-28 13:16:52 -04:00
dbogdan
5a42c10233
projects/fmcomms2/c5soc: Added video output. HPS SPI was replaced by 3 Wire SPI.
2014-08-27 21:46:23 +03:00
Rejeesh Kutty
c435edf194
ad9652/zc706: fix dma write
2014-08-27 10:44:39 -04:00
Rejeesh Kutty
7b280b3bbf
fmcomms6: zc706 build-only version
2014-08-27 10:44:37 -04:00
Rejeesh Kutty
0e909647b4
fmcomms6: initial checkin
2014-08-27 10:44:36 -04:00
Adrian Costina
a49eb5853b
ZED, ZC702: Added contraints so that projects can successfully synthesize on linux systems
...
For ZC706 Fixed one constraint which was not correct
2014-08-26 16:28:41 +03:00
Rejeesh Kutty
5f21f54463
fmcjesdadc1: zc706 version
2014-08-25 14:28:57 -04:00
Rejeesh Kutty
cb29b83b05
a5gt: updates to match a5gt
2014-08-25 10:46:59 -04:00
Rejeesh Kutty
76ffb939e5
zc706: ad9625 copy
2014-08-22 11:24:24 -04:00
Rejeesh Kutty
fe1eaefcff
fmcomms1: zc706
2014-08-22 09:08:55 -04:00
Rejeesh Kutty
280260e54c
c5soc: dmac separated slave and master id widths
2014-08-22 09:08:54 -04:00
Rejeesh Kutty
f3f8414d81
kcu105: changes for ad_iobuf
2014-08-15 15:01:52 -04:00