39a5534e00
hdlmake- updates
2016-07-21 16:10:38 -04:00
6df5ba1a7a
daq2- adxcvr version
2016-07-21 16:09:33 -04:00
4532e5c0cb
fmcomms11- support iq mode
2016-07-21 11:58:03 -04:00
c75289be21
fmcomms11- use qpll tx-12g5, cpll rx-6g25
2016-07-19 16:21:49 -04:00
d6243f3d01
update in fmcomms11 tcl and clock constrains
2016-07-18 09:04:13 -04:00
44d9f98e12
adi_project.pl: Fix ADI_NO_BITSTREAM_COMPRESSION detection logic
...
Only enable bitstream compression only if both the
ADI_NO_BITSTREAM_COMPRESSION environment and TCL variable are not set.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-07-14 10:44:42 +02:00
62c7114d77
Enable bitstream compression for Xilinx projects
...
Enabling bitstream compression reduces the size of the generated bitstream.
This means on one hand it will consume less storage, which is especially
useful for the BOOT partition of the ADI images where we store BOOT.BIN
files for all supported platforms.
On the other hand a smaller bitstream is faster to load from the storage
medium and it is also faster to program to the FPGA. So it reduces the
overall boot time as well.
The only downside of bitstream compression is that the bitstream size is no
longer constant, but depends on the actual design and resource utilization.
This will not work with bootloaders that expect a fixed size.
When building a bitstream using the tcl scripts bitstream compression can
be disabled by setting the ADI_NO_BITSTREAM_COMPRESSION environment
variable.
Initial tests show a reduction of a round 50% in size for most ADI
projects.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-07-14 10:16:15 +02:00
12abe2b6b9
fmcomms2: Makefile update
2016-07-12 09:39:24 +03:00
283bf9ad75
fmcomms2_a10GX: Add fmcomms2 on a10gx
2016-07-11 18:37:18 +03:00
e9fe752b7a
fmcomms2_qsys.tcl: Add fmcomms2 block design script for Altera
2016-07-11 18:34:21 +03:00
92c580a84d
daq3: A10GX, updated project to the TCL flow
2016-07-08 12:00:37 +03:00
7be017baa3
daq1: Add AXI PLDDR FIFO to the receive path
...
The AD9684 has two 500 MSPS converter, the system can not handle this
throughput without a FIFO.
2016-07-07 07:15:54 +03:00
9169e20b5e
daq1: Fix the data width on the DMAC interfaces
...
+ HP ports maximum width is 64 bits
+ DMAC's default width is 64, no need for redefinition
2016-07-07 07:15:54 +03:00
48762519b5
make updates
2016-07-06 15:02:00 -04:00
427cc84bb2
axi_ad7616: Rename the physical interface signals to rx_*
...
No functional modification.
2016-07-01 14:45:23 +03:00
69a68a99e0
imageon/zed - remove onboard hdmi and update design
2016-07-01 14:11:49 +03:00
ad491ec04a
updated tcl files after inclusion of ad9162 core
2016-06-30 13:26:16 -04:00
c6c3622816
a10gx: Updated common design adding explicit clock frequency and synchronous reset deassertion
2016-06-30 10:59:29 +03:00
8d558b2538
make: Update Make files
2016-06-29 14:50:07 +03:00
e6494b9a74
axi_ad7616: Change the DMA interface type to Write FIFO
2016-06-29 14:11:02 +03:00
64633e519c
Merge remote-tracking branch 'origin/dev_ad7616' into dev
2016-06-29 12:32:39 +03:00
2e80dec513
adrv9371x/zc706: Update project with the new axi_dacfifo
2016-06-22 12:33:47 +03:00
67c948e821
fmcomms2/a10soc-- bad board design
2016-06-14 12:29:36 -04:00
8f48a5520a
makefile updates
2016-06-10 14:26:46 -04:00
eaf4d4a19d
makefile updates
2016-06-10 14:26:14 -04:00
1746701d45
fmcomms11- updates
2016-06-10 14:20:43 -04:00
509f031d58
fmcomms11- updates
2016-06-10 14:20:43 -04:00
fdc1240cc8
fmcomms11- spi
2016-06-10 14:20:43 -04:00
8f00760c13
fmcomms11- initial commit
2016-06-10 14:20:43 -04:00
f84fafaaac
adrv9371x/zc706: Fix system top
...
The dac_fifo_bypass gpio is an internal gpio only. No need for IOBUF.
2016-06-10 10:11:27 +03:00
468800bb38
daq2/a10gx- makefile update
2016-06-07 14:06:42 -04:00
625052f46e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
d53b06849e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
ae1dd1d58e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
3516ec28b7
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
3351ff607e
adrv9371x- need to investigate merge with avalon
2016-06-02 16:22:53 -04:00
ebdc7832a7
hdl make updates
2016-06-01 14:00:30 -04:00
bfeebc2791
imageon/zc706- remove onboard hdmi
2016-06-01 13:59:13 -04:00
eca4d4e2a6
imageon/zc706- board updates
2016-06-01 13:59:13 -04:00
c293c04634
hdl make updates
2016-06-01 13:53:09 -04:00
46b464ed72
adrv9371/a10soc- qsys updates
2016-06-01 13:48:51 -04:00
a958ef27da
adrv9371- qsys updates
2016-06-01 13:48:51 -04:00
5b2a90ffff
adrv9371- qsys
2016-06-01 13:48:51 -04:00
af45acfcb9
ad9371- qsys updates
2016-06-01 13:48:51 -04:00
d2fc64d130
daq3/a10gx: updates
2016-05-27 08:37:47 -04:00
d10dd78094
kcu105: Update common design to 2015.4
2016-05-27 14:59:28 +03:00
1853c6921d
adrv9371x/zc706: Fix typo in system_top
2016-05-27 14:13:55 +03:00
a6fbf6c20b
adrv9371x: Update the Makefiles
2016-05-27 14:13:55 +03:00
32d46389f2
adrv9371x: Move GTs AXI interface to HP3
...
If the VDMA and the GTs AXI are connected to the same HP port, the
HDMI won't work on full resolution (1080p). Care should be taken, this can
affect the receive and observation paths (both are connected to HP2).
2016-05-27 14:13:55 +03:00
b452a8e2d4
adrv9371x: Connect bypass and data underflow
2016-05-27 14:13:55 +03:00
3859cba186
adrv9371x/zc706: Add PL_DDR FIFO to the design
2016-05-27 14:13:55 +03:00
d0b40afb45
zc706/common: Fix PL_DDR3 fifo integration script
2016-05-27 14:13:55 +03:00
aca3038919
axi_dacfifo: No overflow for DAC
2016-05-27 14:13:55 +03:00
81ade7f26c
axi_dacfifo: Fix resets
...
DMA side: axi_resetn is used to reset the address counters
DAC side: GT tx_rst is used to reset the last_address register
2016-05-27 14:13:55 +03:00
578376c8fe
axi_dacfifo: Add bypass logic
2016-05-27 14:13:55 +03:00
9c6e80fca2
daq3/a10gx- qsys modifications
2016-05-24 03:15:45 -04:00
39d23032f1
daq2- qsys updates
2016-05-23 10:55:44 -04:00
0d1c4d232e
a10soc- updates-1
2016-05-20 16:14:57 -04:00
09520709b0
make updates
2016-05-20 12:35:45 -04:00
f92e8509bb
adrv9371x- added
2016-05-20 11:46:25 -04:00
50d018fc11
arradio- rfifo/wfifo added
2016-05-18 13:24:13 -04:00
e345953bdd
arradio- updates
2016-05-16 12:19:38 -04:00
72151bb1a6
a10gx: Updated base design to include MMU
2016-05-13 18:44:41 +03:00
f3f5353944
zcu102- updates
2016-05-10 15:40:41 -04:00
16e3a0e569
zcu102- updates
2016-05-10 15:40:41 -04:00
e1350018da
zcu102- updates
2016-05-10 15:40:41 -04:00
a6411dbd63
zcu102- added
2016-05-10 15:40:41 -04:00
e8fbdd0f5d
zcu102: zynq ultrascale
2016-05-10 15:40:41 -04:00
0041bf69be
c5soc- remove unused hps ports
2016-05-09 13:54:08 -04:00
89b20f2a35
c5soc- remove unused hps ports
2016-05-09 13:54:08 -04:00
8d72b645ae
fmcomms2/common: Remove ila_tdd block
2016-05-09 10:28:10 +03:00
b0538a03a2
Make: Update
2016-05-06 16:44:24 +03:00
4863a04132
axi_adc/dacfifo: Split the intergration script file
...
Split the integration script file into two separate script files. Rename the
integration processes names to be more meaningful.
2016-05-05 09:53:55 +03:00
ddfaff2cf5
fmcomms2/a10soc: compile version
2016-05-04 13:42:12 -04:00
f4e5965936
fmcomms2/a10soc: ip updates
2016-05-04 13:42:12 -04:00
92dcce1674
a10soc: default ports
2016-05-04 13:42:12 -04:00
be74db656c
ad6674evb, fmcadc2, fmcadc4, fmcadc5, fmcjesdadc1:
...
Update system_project.tcl scripts to correctly select the necessary
constraint files
2016-05-04 19:37:33 +03:00
3ca3414522
fmcadc2: Fixed bus data width
2016-05-04 19:20:01 +03:00
9104b2cc60
ad6676evb, fmcadc2, fmcadc4, fmcadc5,...
...
ad6676evb, fmcadc2, fmcadc4, fmcadc5, fmcjesdadc1: Remove unused
set_proprieties
2016-05-04 19:13:25 +03:00
385ed31a45
make files update
2016-04-29 10:17:35 -04:00
61b531b1c1
a10soc device update
2016-04-29 10:17:35 -04:00
160d54f311
ad7616_sdz: Some comment rephrase
2016-04-29 16:41:35 +03:00
664ea16a0f
ccpci- carrier changes
2016-04-27 16:26:11 -04:00
e790e4c3ae
a10soc- complete qsys
2016-04-25 12:56:19 -04:00
bfa6fe2a40
a10soc- updates
2016-04-25 11:23:16 -04:00
28159aeec9
a10soc- updates
2016-04-25 11:11:46 -04:00
0a3967b886
a10soc- updates
2016-04-25 10:53:26 -04:00
d36d1263c5
a10soc- updates
2016-04-25 10:50:09 -04:00
1fd5c0f28b
ad7616_sdz: Fix IO definitions for the parallel interface.
2016-04-25 10:56:45 +03:00
6de356e8fc
ad7616_sdz: Fix the data width at i_iobuf_adc_cntrl
2016-04-25 10:55:37 +03:00
2a5f31d26b
fmcomms2/a10soc- copy
2016-04-22 15:15:44 -04:00
82c4f75f13
a10soc- a10gx copy
2016-04-22 10:39:21 -04:00
7a4a7edfba
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:07:41 -04:00
e00236e5fd
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:04:46 -04:00
8b2542b181
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:01:12 -04:00
679d471d75
Merge branch 'hdl_2016_r1' into dev
...
hdl_2016_r1 contains IP core upgrades to Vivado 2015.4.2 and hdmi_tx improvements.
2016-04-19 18:05:50 +03:00
402253d308
usb_fx3: Updated design to include the GPIF II interface
2016-04-19 15:52:30 +03:00
8a574cd8ba
zc706_system_plddr3.tcl : Add integration process for the AXI_DAC_FIFO
2016-04-19 11:30:52 +03:00
c291f8f107
daq1: Updated design to 2015.4
2016-04-14 23:36:47 +03:00
469b4ea5e8
fmcadc5: Updated design to 2015.4
2016-04-14 23:18:23 +03:00
Rejeesh Kutty
Shrutika Redkar
Lars-Peter Clausen
AndreiGrozav
Adrian Costina
Istvan Csomortani