00c215ae69
axi_adc_decimate: Re-implement CIC filter
...
Re-implement the CIC using the basic building blocks from the util_cic
library.
This new implementation is structurally equivalent to the previous version,
but will be used as a platform for implementing changes that will improve
area and power consumtion of the filter
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:40 +02:00
450c5ac74a
Add CIC filter helper module
...
Add a helper module that provides the building blocks of a CIC filter.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:40 +02:00
f1edcb02ac
axi_adc_decimate: Reduce filter_mask register size
...
Only the 3 lower bits of the filter_mask register are used. No need to keep the other bits around.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:40 +02:00
927508404e
axi_adc_decimate: Move processing pipeline to own sub-module
...
Move the processing pipeline of the axi_adc_decimate core to its own
sub-module. This makes it easier to simulate the processing independent of
the register map.
2017-04-18 12:17:40 +02:00
8ba86cb75c
axi_logic_analyzer: Allow changing data pins direction to output only after data is available from the DMA or if the output is set from a register for that specific pin
2017-04-18 12:17:40 +02:00
8476d9d59a
axi_logic_analyzer: Allow only data[0] to be used as alternative clock.
...
- drive all logic on clk_out instead of clk
2017-04-18 12:17:39 +02:00
3c13aa49eb
axi_ad9963: Changed TX path from serdes to ddr.
...
- remove delay control related logic
2017-04-18 12:17:39 +02:00
77b453ac0d
axi_dmac: Make debug register optional
...
The debug registers are useful during development but are rarely used in a
production design. Add a option that allows to disable them, this reduces
the resource utilization of the DMAC.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
547dc04857
axi_ad9963: Sign extend ADC data when processing is bypassed
...
Match the behaviour of the processing data path and sign extend the output
data to 16-bit.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
a0e30a2211
util_axis_fifo: Improve clock gating of registers and BRAM
...
Currently the BRAM and data registers in the util_axis_data are ungated
when the FIFO is ready to receive data. This good for high-performance
since it reduces the number of control signals. But it is bad from a power
point of view since it causes additional reads and writes.
Change the core gate the BRAM and data register if either the consumer is
not ready to accept data or the producer has no data to offer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
72cdd846b0
axi_ad9963: Allow to disable the IDELAYs on the ADC data path
...
Not all designs need the IDELAYs. Disabling them can reduce power consumption of the system.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
09ffe42603
ad_lvds_in: Allow to disable IDELAY
...
The IDELAY is not always required, but it eats up power when instantiated. Allow to disable it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
45f87b46c2
ad_lvds_in: Use "SAME_EDGE" mode
...
Currently the IDDRs are configured in SAME_EDGE_PIPELINED mode, but then
the negative data is delayed by an additional clock cycle. This is the same
behaviour as using the IDDR in SAME_EDGE mode.
Switching to SAME_EDGE mode removes extra pipelining registers while
maintaining the same behaviour.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
0e2b47e517
axi_adc_trigger: Temporarily disable trigger reporting in register map
...
The current implementation doesn't quite work right when the interface
clock is slower than the trigger clock and also causes timing issues.
Disable it temporarily until a proper CDC transfer is implemented.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
be6fa287fa
axi_dac_interpolate: Make dac_reset external
2017-04-18 12:17:39 +02:00
7227e74444
axi_adc_decimate: Make adc_reset external
2017-04-18 12:17:39 +02:00
094872619d
axi_ad9963: Separated adc/dac clock and reset
2017-04-18 12:17:39 +02:00
9f8fd5c922
axi_ad9963: updated tx path
...
- removed pll for power saving, added serdes circuitry instead
2017-04-18 12:17:39 +02:00
fc7f2ef11b
ad_serdes_out: allow selection between DDR/SDR configuration and output single ended data
2017-04-18 12:17:39 +02:00
166a4c53d5
ad_serdes_clk: allow for single ended clock input, made BUFR_DIVIDE configurable
2017-04-18 12:17:39 +02:00
71469490c6
Add a helper module to combine a AXI read-only and a AXI write-only interface into a read-write interface
...
The read and write interfaces of a AXI bus are independent other than that
they use the same clock. Yet when connecting a single read-only and a
single write-only interface to a Xilinx AXI interconnect it instantiates
arbitration logic between the two interfaces. This is dead logic and
unnecessarily utilizes the FPGAs resources.
Introduce a new helper module that takes a read-only and a write-only AXI
interface and combines them into a single read-write interface. The only
restriction here is that all three interfaces need to use the same clock.
This module is useful for systems which feature a read DMA and a write DMA.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
3e0b337eae
axi_ad9963: Remove extra pipeline stages on register read path
...
The register read logic is not that complicated that it needs two extra
pipeline stages. It can easily be condensed into a single combinatorial and
still meet timing with large margins.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
64dfa0432d
axi_ad9963: Disable unused features of the register map
...
Disable registers in the register map which are not needed for this core.
This reduces the utilization of the core.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
957730c421
up_dac_common: Allow to disable GPIO registers
...
Not all peripherals use the GPIO register settings, but the registers still
take up a fair amount of space in the register map. Add options to allow to
disable them when not needed. This helps to reduce the utilization for
peripherals where these features are not needed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
0ae0da488b
up_adc_common: Allow to disable GPIO and START_CODE registers
...
Not all peripherals use the GPIO and START_CODE register settings, but the
registers still take up a fair amount of space in the register map. Add
options to allow to disable them when not needed. This helps to reduce the
utilization for peripherals where these features are not needed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:38 +02:00
1c23cf4621
all: Update verilog files to verilog-2001
2017-04-13 11:59:55 +03:00
3f0633aadc
spi_engine: Fix CMD_FIFO_VALID generation
...
Because of the memory map interface mux, up_waddr_s and up_wreq_s should be
used, when cmd_fifo_in_valid is generated.
2017-04-12 14:57:22 +02:00
c1bdfca4c3
library: Delete all adi_ip_constraint process call
2017-04-06 12:36:47 +03:00
c637d848bb
util_clkdiv: constraints should be applied LATE for this core
2017-04-03 18:14:29 +03:00
e0efbe210e
constraints: constraint files should be specified at adi_ip_files
2017-04-03 18:12:28 +03:00
2f023437b4
adi_ip- remove adi_ip_constraints
2017-04-02 10:42:51 -04:00
d916697263
adi_ip- a little rearrangement
2017-04-01 09:04:35 -04:00
fd56b5a6d3
axi_ad9122: Update constraint files
2017-03-31 10:13:42 +03:00
c46989e4e8
Makefile: Update Makefiles for libraries
2017-03-30 18:33:22 +03:00
495d2f3056
axi_dmac: Propagate awlen/arlen width through the core
...
Depending on whether the core is configured for AXI4 or AXI3 mode the width
of the awlen/arlen signal is either 8 or 4 bit. At the moment this is only
considered in top-level module and all other modules use 8 bit internally.
This causes warnings about truncated signals in AXI3 mode, to resolve this
forward the width of the signal through the core.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-03-30 17:19:38 +02:00
ebfed4b24b
ad_axi_ip_constr.xdc: Delete file
2017-03-30 16:16:02 +03:00
873fbfd6d7
library: Update scripts with new constraints
...
Update all IPs tcl scripts with the new constraints files.
Refer to commit 335fef0
2017-03-30 16:16:02 +03:00
31a5c674f2
fmcomms2: Update constraints file paths
2017-03-30 16:16:02 +03:00
8ba6012b6b
restructure: Move xilinx specific constraints to /library/xilinx/common/
2017-03-30 16:16:02 +03:00
983e56d72c
ad9963: Remove localparams from module parameter list
...
Declaring local parameters in the module parameter list is not valid
verilog. For some reasons Vivado accepts it nevertheless so the code has
worked so far. But this is not true for other tools, so move the local
parameter definitions inside the module body.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-03-30 11:40:28 +02:00
1d448f0013
adi_ip: Set up SCOPE_TO_REF for xdc and save the core
2017-03-29 18:40:24 +03:00
ea7e93d27f
fmcomms2: Use the new constriants from 335fef0
2017-03-29 18:36:09 +03:00
335fef0f42
ad_axi_ip_constr: Split up this constraint file into separate files
...
For experimentation, to solve a constraint scoping issue, split up the
ad_axi_ip_constraint file into separate constraints file, in function
of there parent module.
2017-03-29 18:31:40 +03:00
2419b3626b
ad9684- fix sdc typo
2017-03-23 12:49:44 -04:00
ae0f4672b2
daq1/a10gx- fix project to compile
2017-03-23 09:46:40 -04:00
8063ba2b66
make updates
2017-03-20 16:05:18 -04:00
c277b39796
arradio/c5soc- critical warnings fix
2017-03-20 12:14:13 -04:00
cd0701513a
axi_logic_analyzer: Added an additional delay to the trigger, to be similar with the analog path
2017-03-14 18:00:42 +02:00
3c7f73a880
axi_dmac: Fix dummy port enablement dependency
...
It seems that in the latest version a constant of "0" is no longer a valid
enablement dependency and "false" has be used instead.
Not setting the enablement dependency correctly results in the AXI port to
be assumed to be read-write rather than just read or write. This will
generate unnecessary logic for example in interconnects to which the DMA
controller is connected.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-03-14 16:03:25 +01:00
d7edd71aef
axi_logic_analyzer: Triggering changes on valid data
2017-03-14 15:25:00 +02:00
1ef064ac03
axi_ad9361- add receive init delay
2017-03-13 16:28:38 -04:00
b0e88eb5ff
axi_ad9361- add receive init delay
2017-03-13 16:28:24 -04:00
0ae79ca7ac
move/rename - delay script belongs to ad9361
2017-03-10 12:44:32 -05:00
ce6b0cc7f3
util_fir_dec: Changed output rounding mode to Symmetric rounding to Zero
...
This removes the added DC component that was introduced by the previous rounding mode
2017-03-09 16:33:17 +02:00
eb946b54cc
util_fir_int: Shifted data so that the amplitude at the output of the filter is the same with the input
2017-03-08 14:29:26 +02:00
660dddf1e8
util_dacfifo: Define constraints for bypass
2017-03-07 16:14:46 +02:00
7559d23873
util_dacfifo/constraints- false paths for bypass
2017-03-06 10:33:07 -05:00
7478777d8d
axi_dacfifo: Match the ports with util_dacfifo
2017-03-03 18:46:16 +02:00
760228d676
util_dacfifo: Update the util_dacfifo
...
Fix bypass and undate the general functionality. If bypass enabled
the FIFO will function as a normal CDC FIFO.
2017-03-03 18:43:36 +02:00
e0d4607692
adcfifo- asym_mem primitive changes
2017-03-01 15:55:56 -05:00
3586397f57
altera/common- add asymmetric fifo
2017-03-01 15:35:04 -05:00
9c65166e26
ad9371- missing net declarations
2017-02-28 13:31:23 -05:00
104e9dfcdc
adc/dac-fifo altera cores
2017-02-28 13:30:50 -05:00
0d231935ef
library/util_dacfifo- match bypass port with axi_dacfifo
2017-02-27 16:06:39 -05:00
1d6ddacfd6
axi_ip_constr: Fix constraints
...
The filter for CDC registers were too generic, and a few non-CDC
register were set as asynchronous register.
2017-02-27 16:25:09 +02:00
1c8e63cb68
axi_adc_trigger: Added triggered register
2017-02-27 14:26:19 +02:00
37a1c98c12
axi_logic_analyzer: Switched from BUFGMUX to BUFGMUX_CTRL for glitch free clock switching
2017-02-27 14:19:54 +02:00
11623e79be
axi_dacfifo: Fix clock for read address generation
2017-02-24 15:47:04 +02:00
3e596347fd
axi_dacfifo: Delete unused wires
2017-02-24 15:45:51 +02:00
ac2e5a9dac
constraints: Update constraints
...
Xilinx recommends that all synchronizer flip-flops have
their ASYNC_REG property set to true in order to preserve the
synchronizer cells through any logic optimization during synthesis
and implementation.
2017-02-24 13:43:32 +02:00
f326c03ff3
axi_dacfifo: Define constraint for bypass
...
The bypass module currently is supported, when the DMA data width
is equal with the DAC data width.
The dac_data output is enabled with dac_valid.
2017-02-24 12:35:42 +02:00
b9d3039568
axi_dacfifo: Register the dac_valid signals
2017-02-24 12:34:58 +02:00
debc6e2066
axi_dacfifo: Data from DMA is validated with dma_ready too
2017-02-24 12:32:25 +02:00
dfcd5214a0
axi_dacfifo: axi_dvalid should come from dacfifo_rd module
2017-02-24 12:28:46 +02:00
6b90054343
axi_ad9361: Define CDC constraint for tdd_sync
2017-02-24 11:24:07 +02:00
1fce57f6c3
axi_dacfifo: Redesign the bypass functionality
2017-02-23 17:32:31 +02:00
573959c826
Makefiles: fixed axi_adxcvr/util_adxcvr Makefiles to include interfaces dependancy
2017-02-23 16:16:34 +02:00
d820d3d245
util_sync_constr: Preserve 1bit CDCs with ASYNC_REG true
2017-02-23 11:44:01 +02:00
94bda1d415
axi_ad9361: Preserve 1bit CDCs with ASYNC_REG true
2017-02-23 11:43:10 +02:00
2da7dd4079
axi_ip_constr: Update constraints
...
Xilinx recommends that all synchronizer flip-flops have
their ASYNC_REG property set to true in order to preserve the
synchronizer cells through any logic optimization during synthesis
and implementation.
2017-02-23 11:33:25 +02:00
2b354af876
axi_ad9361_tdd: Register the tdd_sync_cntr output
2017-02-23 11:31:23 +02:00
e3ac341aad
axi_dacfifo: Fix constraints
2017-02-21 14:45:18 +02:00
981a61bf16
axi_dacfifo: Clean up the axi_dacfifo_wr.v module
2017-02-17 18:40:02 +02:00
f10866e4c3
axi_*fifo: Delete/replace AXI_BYTE_WIDTH parameter
2017-02-16 19:54:41 +02:00
95a4ea20c8
axi_dacfifo: Delete redundant parameter BYPASS_EN
2017-02-16 19:53:44 +02:00
358aa48c76
axi_adc_decimate: Fix assignment width
2017-02-15 11:38:43 +02:00
c6ee76421b
axi_usb_fx3: Fixed clock domain association
2017-02-14 11:48:07 +02:00
7c86b038ef
util_fir_int: manually request data at 1/8 clock frequency
2017-02-13 18:05:59 +02:00
5fa6dba333
Make: Update Makefiles
2017-02-10 16:32:58 +02:00
0dae754f2d
axi_adxcvr: Add rparam register to Altera XCVR
2017-02-10 16:19:17 +02:00
24daffcf5c
spi_engine: Set up default driver value for input ports
2017-02-07 12:30:46 +02:00
47db0d80fe
axi_ad7616: Set up default driver value for input ports
2017-02-07 12:29:21 +02:00
a57fb5f82f
library/ad9122- constraints clean-up
2017-02-02 14:21:41 -05:00
1e54b5230f
axi_adxcvr- add m_axi associated clock
2017-02-02 11:17:56 -05:00
806d19febc
axi_adxcvr- add primitive info read
2017-02-01 13:38:29 -05:00
1c9d8c4e7c
axi_adxcvr- add primitive info read
2017-02-01 13:35:02 -05:00
1df6178ab8
library: Update common Makefile
2017-01-31 16:44:32 +02:00
7387df9d13
util_var_fifo: Initial commit
2017-01-31 16:26:45 +02:00
b9c94f63a5
util_extract: Initial commit
2017-01-31 16:26:05 +02:00
6604cc7322
axi_logic_analyzer: Initial commit
2017-01-31 16:23:56 +02:00
9c975211da
axi_dac_interpolate: Initial commit
2017-01-31 16:22:49 +02:00
4a7232cbcb
axi_adc_decimate: Initial commit
2017-01-31 16:21:39 +02:00
35b97abc6d
axi_adc_trigger: Initial commit
2017-01-31 16:20:13 +02:00
fb945ac51c
axi_ad9963: Initial commit
2017-01-31 16:18:58 +02:00
d5af828b9c
Merge branch 'dev' into hdl_2016_r2
2017-01-30 17:10:05 +02:00
db924953bb
altera- warnings about init values
2017-01-30 10:01:28 -05:00
eb8a3fff3c
axi_dmac: Set IP core name and description
...
Add a human readable name and descriptor for the AXI DMAC core.This string
will appear in various places e.g. like the IP catalog. This is a purely
cosmetic change.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-01-30 13:58:48 +01:00
3dd736fe8c
axi_dmac: Add identification register
...
Add a register to the AXI DMAC register map which functions has a
identification register. The register contains the unique value of "DMAC"
(0x444d4143) and allows software to identify whether the peripheral mapped
at a certain address is an axi_dmac peripheral.
This is useful for detecting cases where the specified address contains an
error or is incorrect.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-01-30 13:58:48 +01:00
3f3a8bd267
library: forced ad_mem module to be implemented in BRAM for Xilinx devices
2017-01-25 18:12:04 +02:00
c8b638e182
ad9152- add prbs generators
2017-01-23 10:31:57 -05:00
a2b2ebbed2
ad_lvds_in- ultrascale/ultrascale+ sim device mess
2017-01-21 20:54:21 -05:00
afcd11da87
adxcvr- add parameters for xcvr config
2017-01-19 12:40:26 -05:00
746b97dd96
xilin/axi_adxcvr: Fix clock and reset nets[C
2017-01-19 15:46:16 +02:00
57bd6acd0f
library: Update make file
2017-01-19 15:27:31 +02:00
d3ed417f49
axi_adxcvr: Update the packaging script to fix infer mm issues
...
- Change the clock and reset port name of the AXI slave interface
to s_axi_aclk and s_axi_aresetn. This way we can use the adi_ip_properties
process to infer the interface.
- Define an address space reference to the m_axi interface.
2017-01-19 15:16:04 +02:00
7a7a294865
axi_dmac: Fix memory map infer issues
...
Define an address space reference to the m_dest_axi and
m_src_axi interfaces.
2017-01-19 15:09:07 +02:00
a7bd4e6e82
scripts/adi_ip: Update the adi_ip_properties process
...
- Add a process, which automaticaly infer AXI memory mapped
interfaces (adi_ip_infer_mm_interfaces)
- Add missign line breaks to the 'set_propery supported_families'
command
- Fix the deletion of pre-infered memory maps
2017-01-19 15:06:47 +02:00
61afd106b5
util_clkdiv: Keep as valid only settings common for 7Series and Ultrascale
2017-01-18 11:56:24 +02:00
61ee24f26a
util_clkdiv: Make the clock division parametrizable and changed C_SIM_DEVICE to SIM_DEVICE
2017-01-16 14:37:26 +02:00
4b2602437f
util_clkdiv: Added Ultrascale support and switch to BUFGMUX_CTRL for glitch free switching
2017-01-13 13:54:07 +02:00
1f7d19688a
Update Makefile
2017-01-12 15:58:32 +02:00
b59549053c
scripts/adi_ip: Fix adi_ip_infer_interfaces process
...
This patch is a complementary fix of 8b8c37 patch. And fix
all the 'infer interface' issues.
The adi_ip_infer_interfaces process was renamed to
adi_ip_infer_streaming_interfaces. Now the process just do
what its name suggest.
Affected cores were axi_dmac, axi_spdif_rx, axi_spdif_tx, axi_i2s_adi
and axi_usb_fx3. All these cores scripts were updated.
2017-01-12 12:15:33 +02:00
9b29941c77
util_clkdiv: Add constraint file
2017-01-11 18:11:53 +02:00
c78c9cf633
util_fir_int: Updated coefficient file
2016-12-21 10:06:56 +02:00
c0a2ef1ac4
library- altera power up warnings
2016-12-20 16:18:15 -05:00
ce47cf8d30
ad_sysref_gen: Fix sysref generation
...
Toggle sysref output just if the sysref_en is asserted.
2016-12-19 18:02:49 +02:00
a228c05bd3
common: Add a SYSREF generation module
...
The SYSREF generator is using a simple free running counter,
which runs on the JESD204 core clock. The period can be
configured using a parameter, it must respect the constraints
defined by the JESD204 standard.
The generator can be enabled through a GPIO line.
2016-12-17 11:12:10 +02:00
596d0fa3fb
axi_ad9122: Add a constraint for a false path
2016-12-16 12:07:40 +00:00
a00d9870be
axi_ip_constr: Fix constraints
...
Modify a contraint for a false path, so it will be applied to
up_delay_cntr module too.
2016-12-16 12:01:38 +00:00
99f72a9b3b
util_gtlb: this core is obsoleted
...
The util_gtlb core is obsoleted by xilinx/axi_xcvrlb
2016-12-12 14:23:47 +02:00
5c8dde8483
util_jesd_gt: this core is obsoleted
...
The util_jesd_gt core is obsoleted by xilinx/util_adxcvr and altera/avl_adxcvr
2016-12-12 14:15:38 +02:00
8ebc8fe4e2
updated makefiles
2016-12-09 23:06:41 +02:00
854cd44026
ad9671- xcvr interface changes
2016-12-08 16:05:23 -05:00
977e6d9189
adi_ip_alt: Fix some typo
2016-12-06 15:24:21 +02:00
7876c8ffa4
axi_ad9684: Add loaden and phase ports for altera support
2016-12-06 15:24:20 +02:00
a7d3df8757
axi_ad9684: Update hw tcl script for altera
2016-12-06 15:24:20 +02:00
b0a5be8565
axi_ad9122: Add loaden port for altera support
2016-12-06 15:24:20 +02:00
cedca30cd6
axi_ad9122: Update hw tcl script for altera
2016-12-06 15:24:19 +02:00
0715c962f1
altera/ad_serdes: Fix net alignment for rx_out at ad_serdes_in
2016-12-06 15:24:19 +02:00
6cf9df50e3
altera/ad_serdes: Define DEVICE_FAMILY in hw script
2016-12-06 15:24:18 +02:00
8b8c37e2e2
scripts/adi_ip: Remove AXIMM inference from adi_ip_infer_interfaces
...
The AXI Memory Map interface is infered in the adi_ip_properties process.
Infer it again in the adi_ip_infer_interfaces brakes the flow,
the tool will not find the cell's address segment, so there will not be
any address space assigned to the AXI interface.
Affected cores were axi_i2s_adi and axi_spdif_tx.
2016-12-05 14:33:39 +02:00
753f4bd06e
axi_intr_monitor: Slightly modify counter start points
...
Start the counter_to_interrupt_cnt counter when the counter_to_interrupt
value is written to the register map. This gives applications better
control over when the counter starts counting.
Also start the counter_from_interrupt on the rising edge of the interrupt
signal to avoid bogus values.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-12-02 20:09:29 +01:00
334ce5ddc0
axi_intr_monitor: Fully register IRQ output signal
...
The IRQ signal goes to a asynchronous domain. In order to avoid glitches to
be observed in that domain make sure that the output signal is fully
registered.
This means that the IRQ signal is no longer mask when the control enable
bit is not set. Instead modify the code to clear the interrupt when the
control enable bit is not set. This turns it into a true reset for the
internal state.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-12-02 19:28:13 +01:00
170c781d02
hdlmake.pl- updates
2016-12-01 13:52:11 -05:00
95a2e02800
library/makefile- updates
2016-12-01 13:47:02 -05:00
609b01f9e4
util_clkdiv: Added division by 2 option
2016-11-24 16:01:37 +02:00
91ee4394e4
axi_intr_monitor: Initial commit
2016-11-24 15:19:36 +02:00
f03675cdab
axi_dmac: ID_WIDTH must be clog2(FIFO_SIZE*2)
2016-11-24 13:20:45 +02:00
c705623101
axi_dmac: Fix port connection and port width mismatch
2016-11-24 12:01:45 +02:00
862bd7ef2c
daq3/zc706- xcvr changes
2016-11-23 15:02:20 -05:00
025420d6f8
library/axi_xcvrlb- xcvr changes
2016-11-23 12:00:13 -05:00
8f562fd069
xcvr updates- board procedure
2016-11-22 14:43:36 -05:00
2ea997c3d5
interfaces- remove channel based pll reset
2016-11-22 11:34:29 -05:00
3dbed492b3
util_adxcvr: expose cpll/qpll as it is
2016-11-22 11:32:37 -05:00
3cbe735bd8
util_adxcvr: regenerate from script
2016-11-22 11:21:04 -05:00
c57ffc9364
axi_adxcvr- separate pll reset from channels
2016-11-22 11:12:54 -05:00
b9795c7033
xilinx/util_adxcvr: Update enablement dependencies
2016-11-22 17:33:40 +02:00
2f2570fcac
axi_i2s: Remove incorrectly inferred interfaces
...
Remove interfaces that were incorrectly inferred by the tools.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-18 15:01:29 +01:00
43c74bf55c
axi_i2s: Tie-off optional inputs
...
Tie-off all optional inputs to 0 so that they are driven to a defined value
when not used.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-18 15:01:26 +01:00
26907ef1fd
axi_i2s: Remove duplicated clock interface association
...
The I2S interface has a clock associated to it twice, this will generate a
critical warning when using the core, so remove one of them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-18 15:01:24 +01:00
b85a282748
fmcomms11- lane swap
2016-11-16 10:26:47 -05:00
9d6c93a5d8
Fix warnings
2016-11-14 15:17:15 +02:00
12d6e46ae7
clean: Delete deprecated source files
...
The axi_jesd_gt was repleaced by axi_adxcvr IP, which is located
at library/xilinx and library/altera.
The axi_jesd_xcvr was an early version of axi_adxcvr.
The register map is moved to the IP's directory.
2016-11-14 10:43:46 +02:00
c80033cb1b
util_fir_int: removed s_axis_data_tvalid and updated sdrstk
2016-11-11 17:52:19 +02:00
6f4dc92dd2
util_fir_int: Fix channel data assignment
2016-11-11 15:46:17 +02:00
64d1d54ec0
util_fir_int: Update filter, as it's used with ad9361 in CMOS mode
2016-11-10 17:45:03 +02:00
66098b7ae7
util_fir_dec: Update filter, as it's used with ad9361 in CMOS mode
2016-11-10 17:43:04 +02:00
6073cdded4
axi_ad9250: Tie rx_valid to ground
2016-11-10 10:52:37 +02:00
8845aeb6ab
axi_ad9250: Add missing file to Make and script
2016-11-10 10:48:46 +02:00
8493bd4329
axi_ad6676: Update the core, sof interface added
2016-11-10 10:39:33 +02:00
0b58a2a1db
avl_adxcvr- sysclk frequency
2016-11-09 09:21:07 -05:00
48ee720901
avl_adxcvr- a5 requires single transceiver controller
2016-11-08 15:20:01 -05:00
a58597c13a
ad9250 - build fixes
2016-11-08 15:17:54 -05:00
d7357d781b
axi_ad9250 - avalon/axi streaming + sof
2016-11-04 15:30:39 -04:00
ee9c8b884d
avlxcvr- add arria v support
2016-11-04 15:01:19 -04:00
9dc7f16d80
axi_usb_fx3: Added zero length packet capability
2016-11-03 15:29:56 +02:00
1e0fed82f7
alt_serdes- a10 ddio fixes
2016-11-01 12:41:25 -04:00
5eff357568
up_tdd_cntrl: Fix memory map register writes
2016-11-01 10:06:57 +02:00
9f4c5f8060
arradio/ad9361- updates
2016-10-31 15:34:32 -04:00
b94cc8afb1
altera- cmos cores
2016-10-31 13:13:48 -04:00
e0459df0f3
altera -c5 qsys alternative
2016-10-31 11:18:27 -04:00
cc75fa3dfe
altera- java/tcl mess handling
2016-10-31 10:54:07 -04:00
a9d03af771
altera- serdes changes
2016-10-28 14:09:18 -04:00
f2e12cc88f
util_fir_dec: Shifted the output data to the left so that the amplitude remains
...
constant
2016-10-28 15:18:36 +03:00
d9b756e7ad
util_fir_int: Shifted the output data to the left so that the amplitude remains constant
2016-10-28 15:17:30 +03:00
30314e4492
library: Added util_fir_int and util_fir_dec interpolation/decimation filters
2016-10-27 19:31:50 +03:00
8107514dde
altera/common- ad_serdes_clk
2016-10-27 09:41:10 -04:00
f7e3703b98
axi_ad9371- avalon-s interfaces
2016-10-27 09:25:00 -04:00
6f611e0d10
altera/alt_serdes: Add support for Cyclone V
2016-10-25 20:32:51 +03:00
08cef5a745
axi_ad9361: Add Cyclone V SERDES support
2016-10-25 20:24:17 +03:00
5731ba3300
fmcomms11- xcvr updates
2016-10-24 09:51:40 -04:00
de0c487195
axi_ad9684: Add Altera support for the core
2016-10-24 11:43:22 +03:00
3f3606d318
axi_ad9122: Add Altera support for the core
2016-10-24 11:43:12 +03:00
aa46de5e5e
adi_ip_alt: Add ad_generate_module_inst proc
...
Add a tcl process, which can be used to generate custom module
names during the generation phase. This will be used to create
different ad_serdes_clk module, in case when independent IOPLLs are
needed for TX and RX.
2016-10-24 11:43:00 +03:00
707038937a
alt_serdes: Add additional parameters
...
Add additional parameters to keep the top of ad_serdes_* modules
consistant through differente carriers.
2016-10-24 11:42:43 +03:00
8dbfe9258f
axi_ad9162: Delete duplicated port
2016-10-21 13:47:01 +03:00
0beecea02d
util_adxcvr- ultrascale updates
2016-10-19 13:06:10 -04:00
72c05e8635
axi_dmac: Fix constraints for ultrascale
...
Replace "PRIMITIVE_SUBGROUP == flop" with "IS_SEQUENTIAL" as the former is
series7 specific while the later works on all platforms. This fixes the
axi_dmac timing constraints for ultrascale based platforms.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-10-19 14:00:54 +02:00
ecc0addb8c
scripts/adi_ip_alt.tcl: Script is case insensitive for its arguments
2016-10-18 11:25:06 +03:00
bf949f1a88
axi_xcvrlb- xcvr updates
2016-10-17 16:16:57 -04:00
1b3fcb5863
util_adxcvr- parameter defaults
2016-10-17 16:10:57 -04:00
a026d44435
axi_generic_adc: Add missing up_adc_common connections
2016-10-12 13:20:26 +03:00
b543402051
axi_mc_current_monitor: Add missing up_axi connection
2016-10-12 13:20:26 +03:00
91995c082d
axi_ad9684: Fixed up_drp_*data width
2016-10-12 13:20:26 +03:00
a505d304af
Add up_dac_common missing connections
2016-10-12 13:20:26 +03:00
43ee917d53
Add up_dac_channel missing connections
2016-10-12 13:20:26 +03:00
1131be91ed
axi_ad9361: Makefile update
2016-10-11 23:34:13 +03:00
b7767aa18f
xilinx/axi_ad9361_lvds_if: Remove ila
2016-10-11 18:13:45 +03:00
2d93d787ab
altera/ad_cdfilter: Update interface to Verilog 2001 standard
2016-10-11 17:59:21 +03:00
369dad60b0
axi_ad9361: Add Altera SERDES interface support
2016-10-11 17:59:19 +03:00
ae47895666
altera/alt_serdes: Fixed SERDES 4 factor initialization
2016-10-11 17:59:17 +03:00
d41945f568
altera/ad_serdes: Add support for any SERDES factor less than 8
2016-10-11 17:59:14 +03:00
52194f0fea
axi_ad9361: Add DRP connection to the interface module
2016-10-11 17:59:12 +03:00
7194d2eccc
axi_ad9361: Grup interfaces to add support for more carriers
2016-10-11 17:58:49 +03:00
cc6ca4f0f2
ad_lvds_in- ultrascale sim device
2016-10-10 10:39:47 -04:00
121b341b45
axi_spdif_rx: Fixed version register issue. Added sampled_data to sensitivity list
2016-10-10 17:30:13 +03:00
ff980551e6
ad_serdes: SERDES_FACTOR handover missing
...
In modules ad_serdes_in/ad_serdes_out the handover of the parameter
SERDES_FACTOR did not exist, causing unwanted behavioral in case of
factors less than 8.
SERDES_FACTOR must be hand over to DATA_WIDTH parameter of the SERDES
primitive.
2016-10-10 16:38:42 +03:00
f34aa67029
axi_hdmi: Fix a typo
2016-10-10 16:22:18 +03:00
15f36af4c2
axi_ad9152: Update core to support Altera platforms
2016-10-10 16:21:49 +03:00
111adac825
axi_usb_fx3: Updated core
...
- trig signal will reset state machine
- slrd_n delay will be absorbed by the axi_usb_fx3_if module, when Xilinx DMA is not ready to receive data during a packet
- fx32dma_eop signals when the FX3 DMA buffer should be empty. slrd_n set high and sloe_n set low for another two clock cycles
- eot_fx32dma signals the interface that the packet has been fully transfered. No need for watermark signals
- added length_fx32dma and length_dma2fx3 as requested
2016-10-10 10:33:37 +03:00
39fdf11ef3
util_adxcvr- rx/tx clocks
2016-10-05 13:53:02 -04:00
7ec93ce8e0
util_adxcvr: Fix some typo
...
GTHE4_CHANNEL is instantiated in case of XCVR_TYPE == 2
2016-10-05 17:42:12 +03:00
4f587d2e48
util_adxcvr: Delete trailing whitespaces
2016-10-05 17:41:40 +03:00
1b9d2d434c
axi_ad9361_tdd: Delete unused register
2016-10-05 17:41:08 +03:00
ddceff2b5c
axi_usb_fx3: Updated header/footer signature
2016-10-04 16:11:24 +03:00
48dd4880a3
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
0e8551545c
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
b4652650e4
util_adxcvr- xcvr_type parameter
2016-10-03 16:11:45 -04:00
63ddcf1e26
util_adxcvr- synthesis warnings fix
2016-10-03 16:11:45 -04:00
8e0dc859af
axi_usb_fx3: Update
...
- added 1 clock delay for slrd_n signal
- rearrange databytes
2016-10-03 15:17:01 +03:00
43b3761b80
axi_ad9361: Flop the tx and rx valid
2016-10-03 12:24:04 +03:00
8e25bc01b3
all: Change tab to double space
...
Occasional file parsing and restructuring become a pain, if tabs exists
in code. General rule of the repos is tab always a double space.
2016-10-01 18:13:42 +03:00
6b956066ef
xilinx/ad_lvds*- ultrascale+
2016-09-30 11:55:10 -04:00
e9105faae1
library/scripts- add beta devices
2016-09-30 11:55:10 -04:00
c072c2f89a
util_clkdiv: Add IP
2016-09-30 17:13:51 +03:00
7290bcc81a
hdlmake- updates
2016-09-29 11:50:58 -04:00
ffec95f220
ad9371- xcvr updates
2016-09-29 11:50:58 -04:00
b4fac96aad
axi_ad9361- independent disables
2016-09-28 15:45:27 -04:00
f7fb3ccaca
axi_ad9361: Change the data path gating
...
Bring up the datapath gating from the TDD controller module.
2016-09-28 16:36:13 +03:00
df485d7878
axi_ad9684: Fix the PN9 PRBS sequence monitor
2016-09-28 10:47:16 +03:00
9defccef70
dacfifo- axi address map fixes
2016-09-27 14:48:23 -04:00
c98e2e95dd
ad9162- xcvr updates
2016-09-26 15:21:45 -04:00
692cb10fb2
ad9625- xcvr updates
2016-09-26 15:21:11 -04:00
ad16aec101
axi_ad9684: Fix SERDES modules
2016-09-26 11:14:35 +03:00
f6c7aa9005
library- dac parameter changes
2016-09-23 16:15:59 -04:00
1a11e28821
ad9361- dac data path split
2016-09-23 16:13:46 -04:00
6735333aea
common- dac data path split
2016-09-23 16:13:24 -04:00
6837143110
library/ adc parameter changes
2016-09-23 13:44:47 -04:00
7be6168b2e
ad9361- adc data path split
2016-09-23 13:42:14 -04:00
8729af1b91
common- adc- data path disable split
2016-09-23 13:40:35 -04:00
78f7384150
ad9361- vivado synthesis warnings fix
2016-09-22 13:41:18 -04:00
2b6eb1d65e
up_drp: Revert some bit locations
...
Linuxe drivers are checking the drp_locked status even if the
core does not contains a clock generation/managment module. To
not break all the designs, revert all the status and control bits to
there old locations.
2016-09-22 16:32:42 +03:00
21b5e9c634
hdlmake- updates
2016-09-21 11:56:03 -04:00
0def596b43
axi_xcvrlb- updates
2016-09-21 11:04:22 -04:00
d497a7b0ae
axi_xcvrlb- constraints
2016-09-21 11:04:22 -04:00
a21b9fe8ff
up_drp: Fix up_drp_wr
2016-09-21 17:55:58 +03:00
64cd7dc002
axi_ad9122: Update core to the new DRP interface
2016-09-21 16:09:55 +03:00
bae839acd4
axi_ad9739a: Update core to the new DRP interface
2016-09-21 15:23:08 +03:00
781702c1b9
axi_ad9434: Update the core to the new DRP interface
2016-09-21 15:12:59 +03:00
913eafed48
up_drp : Update the DRP interface to support Altera platforms
2016-09-21 15:00:45 +03:00
10408b8c88
up_tdd_cntrl: Set PCORE version to 1.00.a
2016-09-21 10:27:28 +03:00
1860d72df6
axi_xcvrlb- updates
2016-09-19 12:39:59 -04:00
5592c2780e
axi_xcvrlb- loopback version
2016-09-19 12:39:59 -04:00
38f1521861
xilinx/ad_serdes_in : Fix some typos
2016-09-19 16:02:52 +03:00
ff0f659a33
xilinx/ad_serdes_clk : Rename parameter MMCM_DEVICE_TYPE to DEVICE_TYPE
2016-09-19 16:02:06 +03:00
2159f78c80
axi_ad9361: Delete invalid assignment of a generated wire
2016-09-16 17:38:08 +03:00
6510f92c12
ad_serdes : Cosmetic changes
2016-09-16 14:45:39 +03:00
13a35f7a2a
altera/ad_serdes_clk: The IO_PLL reset is active heigh
2016-09-16 14:20:39 +03:00
858ea09048
altera/ad_serdes_in: Fix some typos
2016-09-16 10:56:16 +03:00
a2d15acb89
ad_serdes- altera/xilinx sync
2016-09-15 13:33:55 -04:00
63696c1a28
alt_serdes- data-width parameter
2016-09-15 11:12:18 -04:00
02dfd2d2e2
altera/ad_serdes_out- sample transmit order
2016-09-15 10:28:34 -04:00
5986f45cba
altera/ad_serdes_out- updates
2016-09-15 09:38:11 -04:00
16ee1336c3
Makefile: Update make files
2016-09-15 11:41:06 +03:00
3b0c1e02fc
axi_dacfifo: Move IP to library/xilinx
2016-09-15 11:38:16 +03:00
3cbbc771a8
axi_adcfifo: Move IP to library/xilinx
2016-09-15 11:36:47 +03:00
fe133a7c39
v2001- parameter defines
2016-09-14 15:47:45 -04:00
16046a984c
alt_serdes- updates
2016-09-14 12:05:48 -04:00
4a6b554c0a
ad_serdes- updates
2016-09-14 11:12:53 -04:00
343056b674
axi_usb_fx3: Update IP to work with 2016.2
2016-09-14 15:40:42 +03:00
a0318ae868
ad_serdes_clk- syntax errors
2016-09-13 14:02:11 -04:00
734b39a8ed
alt_serdes: Fix some issues in the _hw.tcl script
2016-09-13 17:42:51 +03:00
bced17a16f
axi_ad9144- qsys updates
2016-09-12 14:57:50 -04:00
01b7662e05
axi_ad9680- qsys updates
2016-09-12 14:57:50 -04:00
c6998dd396
scripts- altera conduit
2016-09-12 14:57:50 -04:00
73ebf1225c
axi_adxcvr- ip/phy split
2016-09-12 14:57:50 -04:00
21545ee83f
avl_adxcvr- ip/phy split
2016-09-12 14:57:50 -04:00
8718b7f477
avl_adxphy- ip/phy split
2016-09-12 14:57:50 -04:00
d30ffdb7e9
avl_adxcfg- ip/phy split
2016-09-12 14:57:50 -04:00
9159e31244
axi_adxcvr- compile fixes
2016-09-12 14:57:50 -04:00
5a309d8863
avl_adxphy- split
2016-09-12 14:57:50 -04:00
2a34f9baa8
alt-serdes, in & out
2016-09-12 11:45:23 -04:00
9e0c39a71b
alt_serdes_clk- changes
2016-09-12 10:30:28 -04:00
f4be0524b4
altera/common: Add SERDES related modules
2016-09-09 18:04:41 +03:00
a183e51a12
axi_ad9361: Add parameter R1_MODE_EN
...
R1_MODE_EN can disable the second I/Q channel of the core. This way
the user can save resources by cutting down the size of the core.
2016-09-09 16:34:11 +03:00
e42206e510
axi_ad9361: Add a TDD enable/disable parameter
2016-09-09 14:38:28 +03:00
be41a8bcaa
axi_ad9361: Delete debug ports of the tdd module
2016-09-09 14:38:28 +03:00
bbcf2a3ec3
axi_ad9434/axi_ad9434_constr: Change constraint file to resolve critical warning
2016-09-01 17:16:59 +03:00
4ae084ee32
avl_adxcvr- compile fixes
2016-09-01 10:06:28 -04:00
5544e3cf10
axi_adxcvr- compile fixes
2016-09-01 10:06:28 -04:00
230f1526c0
avl_adxcfg- compile fixes
2016-09-01 10:06:28 -04:00
b7ea2efa87
altera- xcvr cores
2016-08-29 15:18:48 -04:00
9799599eee
library/ad9361- add dac clk sel
2016-08-26 10:31:00 -04:00
74bc498a6d
library/common- added dac clock select
2016-08-26 10:31:00 -04:00
10b9a0e52f
upadated xcvr ips
2016-08-17 15:51:55 -04:00
6a8ca8107a
common: Added common ad_dcfilter stub for altera.
2016-08-16 17:37:16 +03:00
e754f0a46a
up_axi- writes dropped by delayed w-responses
2016-08-14 11:21:19 -04:00
3427965cd2
adxcvr- add u-gth bufg
2016-08-11 10:00:41 -04:00
bb9cb86f34
adc/dac- fifo constraints
2016-08-11 10:00:41 -04:00
829e4155ca
modified transceiver configuration files
2016-08-10 14:59:38 -04:00
b8f4e1c0aa
updated 9680 hdl files(to resolve a critical warning)
2016-08-10 14:50:31 -04:00
ccf1c56b33
util_upack: Patch up the description of Altera IP
2016-08-08 16:39:56 +03:00
e9ac4a5a0e
util_rfifo: Patch up the description of Altera IP
2016-08-08 16:39:25 +03:00
0cd608a7e2
lib_refactoring: Update Make files
2016-08-08 16:38:38 +03:00
aad8c265bc
lib_refactoring: Fix path for CMOS sources
2016-08-08 15:07:54 +03:00
1d33d7d7ee
lib_refactoring: Move the CMOS interface modules to ~/library/xilinx/common
2016-08-08 15:07:42 +03:00
df36902713
lib_refactoring: Fix path of the IO macros
2016-08-08 15:07:19 +03:00
90ac7b7ac9
lib_refactoring: Move all Altera module to library/altera/common
...
Move all Altera modules to library/altera/common, delete the
deprecated wrapper files
2016-08-08 15:07:01 +03:00
cb9af99c5d
lib_refactoring: Add ad_mul.v for Altera
2016-08-08 15:06:48 +03:00
b806fa3b42
lib_refactoring: Move all the Xilinx common modules to library/xilinx/common
2016-08-08 15:06:10 +03:00
5faf4c4976
cleanup: Don't need Makefiles specific to xilinx/altera libraries. Top Makefile covers them
2016-08-05 16:27:52 +03:00
d60bce654c
Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools
2016-08-05 15:16:04 +03:00
cb23ba8bb7
make- script needs update
2016-08-04 14:17:04 -04:00
e42b4ea378
hdlmake- updates
2016-08-04 13:28:25 -04:00
2b7c976be5
xcvr- altera/xilinx split
2016-08-04 13:26:10 -04:00
cba53774ca
axi_dmac: Don't add CDC constraints when all clocks are synchronous
...
When all clocks are synchronous there are no synchronizers and the
constraint for the CDC registers can't find any cells which generates a
warning. To avoid this don't add CDC constraints when all the clocks are
synchronous.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-02 19:30:24 +02:00
aece3f5555
axi_ad9680: Update IP core
...
- added signals so that AD9680 can be connected to altera's xcvr core through an avalon streaming sink
- added DEVICE_TYPE parameter in _hw.tcl, set to 1 for altera
2016-08-01 15:05:30 +03:00
a0ae791395
hdl-vivado-2016.2: Update axi_jesd_gt
...
Infer AXI bus interfaces separately.
2016-08-01 13:53:18 +03:00
fbe3d75eb0
cosmetics: Delete trailing whitespace characters
2016-08-01 13:46:46 +03:00
b99117e686
up_axi: Same cycle BVALID/READY fails on Altera
...
The Qsys interconnect does not handle the assertion of BVALID on the
same cycle as [A]WREADY. Add a single cycle of delay to prevent
deadlocks.
Similar to:
2817ccdb22
2016-08-01 12:17:10 +03:00
58b220ba81
ad_tdd_control: Add an on/off switch to the receive datapath
...
For a more robust control, add an on/off switch to the receive datapath too,
in order to filter out transition noises.
2016-08-01 11:49:27 +03:00
7988d2c7a2
adi_ip: remove duplicated errored auto address maps & interfaces
2016-07-29 12:32:19 -04:00
4aa506de8d
adxcvr- added a space?
2016-07-29 09:38:08 -04:00
71dad14e0e
axi_adcfifo- disable auto infer mess-up
2016-07-29 09:37:17 -04:00
39ff059ef6
hdl-vivado-2016.2- productivity decimated again!
2016-07-28 13:44:57 -04:00
d5d61ff518
hdl-vivado-2016.2- productivity decimated again!
2016-07-28 13:44:57 -04:00
52b544bb66
hdl-vivado-2016.2- auto infer bus interfaces
2016-07-28 13:44:57 -04:00
3384d384d3
hdl-vivado-2016.2- infer bus interfaces separately
2016-07-28 13:44:57 -04:00
c316f0dfea
ad9144- synthesis warnings fix
2016-07-28 13:44:57 -04:00
8a2734b43e
up_dac_common- typo- unf register reset
2016-07-28 13:44:57 -04:00
6ebb32a194
library axi-slave missing protection signal added
2016-07-22 12:54:27 -04:00
39a5534e00
hdlmake- updates
2016-07-21 16:10:38 -04:00
5c91e41da8
ad9680- sof + sample delineation
2016-07-21 16:09:33 -04:00
db6d5f509f
library/common- xcvr interface logic
2016-07-21 16:09:33 -04:00
75864f0ce5
util_adxcvr- add constraints file
2016-07-21 16:09:33 -04:00
1435c5f7f7
util_adxcvr- add clock buffers, rst-done, rate on usrclk
2016-07-21 16:09:33 -04:00
8e04e70791
axi_adxcvr- status output for jesd ip
2016-07-21 16:09:33 -04:00
1f25d7f637
axi_adxcvr- self-disable based on num of lanes
2016-07-21 16:09:33 -04:00
c797a579f1
util_adxcvr- rstdone on usrclk2
2016-07-21 16:09:33 -04:00
ced36f6159
up-dac- support iq mode
2016-07-21 11:58:03 -04:00
3a1ecb7463
ad9162- support iq mode
2016-07-21 11:58:03 -04:00
040f72d172
ad_mul_u16: Delete unused module
2016-07-20 14:17:04 +03:00
2dd6bb0cb8
up_drp_cntrl: Delete unused module
2016-07-20 14:17:04 +03:00
af9915b060
up_axis_dma_*: Delete unused modules
2016-07-20 14:17:04 +03:00
df43ca9332
ad_axis_dma_*: Delete unused modules
2016-07-20 14:17:04 +03:00
46b00aea2d
util_adc_pack: Delete unused IP core
2016-07-20 14:17:04 +03:00
8902a31ca6
util_dac_unpack: Delete unused IP core
2016-07-20 14:17:04 +03:00
634924246a
axi_jesd_xcvr: Delete Makefile
...
This core is an Altera core only, no need for Makefile.
2016-07-20 14:17:04 +03:00
74c220d79e
make: Update Make files
2016-07-20 14:17:04 +03:00
b9a5bb3549
axi_dacfifo: Optimize the AXI read logic
...
Save the valid AXI beats number of the last AXI transaction, and the valid
DMA beats number of the last AXI beat, so the read back logic can use this
data and prevent to feel up the CDC memory with invalid samples. Also in
this way the end of the read back cycle get a more robust control: no more
duplicated samples at the end of the buffer.
2016-07-20 11:49:06 +03:00
e46990e508
axi_dacfifo: Cosmetic changes
...
Rename a few registers and fix indentation.
2016-07-20 11:49:06 +03:00
b48401175a
axi_dacfifo: Optimize the AXI write logic
2016-07-20 11:49:06 +03:00
74f45cff24
axi-ad9625: fix clock ratio to match sampling clock
2016-07-19 16:21:13 -04:00
1df942b752
rfifo- buffer 1 seg before read
2016-07-12 10:24:22 -04:00
4f0d7bd6eb
util_wfifo: read after write is complete
2016-07-11 09:59:31 -04:00
832efdc99c
hdlmake updates
2016-07-08 13:58:56 -04:00
7a03d44e4e
adxcvr- clock buffers are removed
2016-07-08 13:57:27 -04:00
20ac95b1ec
adxcvr- initial commit
2016-07-08 13:57:27 -04:00
48762519b5
make updates
2016-07-06 15:02:00 -04:00
427cc84bb2
axi_ad7616: Rename the physical interface signals to rx_*
...
No functional modification.
2016-07-01 14:45:23 +03:00
d931b2ee64
ad9162 core verilog files
2016-06-30 10:24:01 -04:00
8d558b2538
make: Update Make files
2016-06-29 14:50:07 +03:00
18e28b01fd
axi_ad7616: Add burst counter to the parallel interface
...
With this counter the parallel logic supports the burst sequencer.
2016-06-29 14:17:28 +03:00
e6494b9a74
axi_ad7616: Change the DMA interface type to Write FIFO
2016-06-29 14:11:02 +03:00
64633e519c
Merge remote-tracking branch 'origin/dev_ad7616' into dev
2016-06-29 12:32:39 +03:00
cdf01a492e
library/axi_dacfifo: Update the bypass logic
...
The bypass logic is located between the AXI read controller and the
DAC CDC fifo. When the bypass is enabled the DMAC destination interface
must be clocked with the PL_DDR controller's ui_clk. This way it can easily
switch between the AXI read's stream and DMAC's stream interface.
2016-06-22 12:24:54 +03:00
def47dd536
interfaces: added xcvr interfaces
2016-06-17 12:00:15 -04:00
36fbf4fc42
util_adxcvr: shared xcvr cores
2016-06-17 11:59:42 -04:00
87cf13b0ef
util_adxcvr- system verilog interfaces
2016-06-16 16:41:43 -04:00
80ce7aeb66
util_adxcvr- updates
2016-06-16 16:40:57 -04:00
7c762f63a8
library/axi_dacfifo: Fix the control logic of the write side
...
Fix the control logic for the AXI write transactions.
2016-06-15 13:49:00 +03:00
d5ce137c55
library/axi_dacfifo: Fix reset for a few registers
2016-06-15 13:49:00 +03:00
10090a296e
library/axi_dacfifo: Cosmetic changes
...
Rename a few registers and improve consistency.
2016-06-15 13:49:00 +03:00
7485d27d37
ad9361/altera- device-family variable
2016-06-14 12:28:13 -04:00
5d437083cc
ad9361/altera- a10+ only
2016-06-14 12:19:54 -04:00
dc45287b14
util_adxcvr- added
2016-06-14 12:19:18 -04:00
c19ed4c8ef
axi_hdmi_tx_core: Fixed embedded sync synchronization signals
2016-06-14 14:30:28 +03:00
aee38e1cc9
up_hdmi_tx: Fixed data path width
2016-06-14 14:27:03 +03:00
27fd5f5bdc
modified prbs7 and prbs15 gereration code
2016-06-13 14:44:03 -04:00
83dd7e91c4
deleted pn23 and pn 31, data width yet to be modified
2016-06-13 14:44:03 -04:00
341b7badee
library/scripts: Remove all autogenerated interface in adi_ip_properties_lite
...
There are a few IP, which is configured by using just the adi_ip_properties_lite
process, therefor the remove_all_bus_interface will be called in the end of that
process, to make sure that all the autogenerated interfaces are deleted during the
IP properties setup.
2016-06-10 15:08:05 +03:00
9d1ae436b1
common/util_pulse_gen: Rename the ad_tdd_sync module
2016-06-09 10:07:47 +03:00
abe837e608
util_rfifo: Set an offset for the write addres
2016-06-02 17:34:29 +03:00
c293c04634
hdl make updates
2016-06-01 13:53:09 -04:00
3832f2669e
axi_jesd_xcvr: support tx/rx disable
2016-06-01 13:48:51 -04:00
54f398cc36
ad9371-hw- add dsp slice
2016-06-01 13:48:51 -04:00
e1495b89f9
axi_dacfifo: Cosmetic changes
2016-05-27 14:13:55 +03:00
c724c027c4
axi_dacfifo: Fix the synchronizers
2016-05-27 14:13:55 +03:00
183c67aca0
axi_dacfifo: Update the axi write controller
...
Do some refactoring and add a DMA beat counter.
2016-05-27 14:13:55 +03:00
8caa783f5c
axi_dacfifo: Update the constraints
2016-05-27 14:13:55 +03:00
3b6a36e3e2
axi_dacfifo: Increase the ASYM_MEM depth in the DAC side
...
Increase the asymetric memory depth on the DAC side. Increase the
data width of the grey coder and decoder.
The controller fills up the CDC memory with three AXI burst, to prevent
underflow on the wrap arounds.
2016-05-27 14:13:55 +03:00
c8d4f956e7
axi_dacfifo: Update the read back logic
...
Update the readback logic of the FIFO. The controller uses a
relative address counter, which counts the DMA beats. The readback
logic uses the last value of that counter to define the wrapping
address. The aditional data from the last AXI burst, if there is any,
will be dropped.
2016-05-27 14:13:55 +03:00
88e0cfec42
axi_dacfifo: The AXI read and write have the same properties
...
AXI read and AXI write channel have the same SIZE and LENGTH.
2016-05-27 14:13:55 +03:00
aca3038919
axi_dacfifo: No overflow for DAC
2016-05-27 14:13:55 +03:00
81ade7f26c
axi_dacfifo: Fix resets
...
DMA side: axi_resetn is used to reset the address counters
DAC side: GT tx_rst is used to reset the last_address register
2016-05-27 14:13:55 +03:00
578376c8fe
axi_dacfifo: Add bypass logic
2016-05-27 14:13:55 +03:00
f10c1e6e93
axi_hdmi_tx: Remove hdmi_full_range register
2016-05-27 14:04:40 +03:00
05ac271aff
daq3/a10gx- qsys modifications
2016-05-24 03:15:24 -04:00
d254fa841b
library- altera updates
2016-05-23 10:55:07 -04:00
3f00614bc7
axi_jesd_xcvr: rx/tx only select
2016-05-20 16:13:36 -04:00
f1a603a3b1
ad9371- altera ip
2016-05-20 15:16:36 -04:00
09520709b0
make updates
2016-05-20 12:35:45 -04:00
b5b05bb9d1
axi_ad9371: added
2016-05-20 11:41:54 -04:00
bf0b90229a
rfifo/wfifo- qsys ip
2016-05-18 13:24:13 -04:00
7fdaee186c
upack/cpack- qsys ip
2016-05-18 13:24:13 -04:00
a262eb7ab3
ad9361- output-rst - associated-rst issue?
2016-05-18 13:24:13 -04:00
e15893444c
upack- fix interface names
2016-05-18 13:24:13 -04:00
285cbc7225
xfifo- fix sdc/xdc names
2016-05-18 13:24:13 -04:00
d7f0bd1b76
ad9361- add reset sink
2016-05-18 13:24:13 -04:00
bb4ed42a93
ad9361- add missing wires
2016-05-18 13:24:13 -04:00
42b0fabd40
axi_hdmi_tx_core: Fixed data path
2016-05-17 14:41:18 +03:00
68329de738
ad9361- interface updates
2016-05-16 12:19:38 -04:00
421c0519f4
util_rfifo- updates
2016-05-16 12:19:38 -04:00
e05204a86d
util_cpack: interface updates
2016-05-16 12:19:38 -04:00
6bc05fc844
ad_*_in: register post-iob
2016-05-16 12:19:38 -04:00
cd7c9c99ed
ad_*_clk: altera-pll not supported by qsys flow
2016-05-16 12:19:38 -04:00
4fbff45e27
util_wfifo- updates
2016-05-16 12:19:38 -04:00
f515885fc4
util_wfifo: altera ip
2016-05-16 12:19:38 -04:00
58a2a3259c
util_rfifo: updates
2016-05-16 12:19:38 -04:00
82d43783f1
util_rfifo: altera ip
2016-05-16 12:19:38 -04:00
31671bf9d5
util_rfifo: constraints
2016-05-16 12:19:38 -04:00
aadb220a3f
zcu102- updates
2016-05-10 15:40:41 -04:00
3871d3ce2b
ad9361-c5/a10 - updates
2016-05-09 13:54:08 -04:00
9cd6e2da51
quartus-mess- altddio direct instantiation
2016-05-09 13:54:08 -04:00
726ddb6e93
ad_lvds_clk: Fixed assignment mismatched
2016-05-09 10:32:18 +03:00
b0538a03a2
Make: Update
2016-05-06 16:44:24 +03:00
b36c722ec9
up_hdmi_tx: Discard the standard default values
...
Restore the base functionality of the core. Changing the data format
will not set by default its standard maximum and minimum data clipping
ranges.
2016-05-05 13:41:46 +03:00
68d83def01
axi_hdmi_tx_core: Fixed data path
2016-05-05 13:32:25 +03:00
0d2dc2c62b
axi_hdmi_tx: Fixed data bus width
2016-05-05 13:26:59 +03:00
bdfa383622
library/axi_ad9361: tdd false paths
2016-05-04 13:42:12 -04:00
ef6c99ecab
library/axi_ad9361: hw component updates
2016-05-04 13:42:12 -04:00
3b5e44e37d
library/axi_ad9361: mmcm rst for plls
2016-05-04 13:42:12 -04:00
16a13b2023
library/axi_ad9361: add rst/locked to clock
2016-05-04 13:42:11 -04:00
1aac44b0d9
library: ad_*clk- rst/locked
2016-05-04 13:42:11 -04:00
d82ca5dc3c
library/common- altera variations
2016-05-04 13:42:11 -04:00
b6b68e9ab7
axi_jesd_gt: Split the constraint file
...
-split axi_jesd_gt_constr.xdc file in rx, tx and common constraint files
-updated tcl script
2016-05-04 19:32:06 +03:00
583bafd17a
axi_ad7616: Add a new register for IF_TYPE
...
Add an additional new read only register at 0x03 address for the interface type. This way the software can verify the actual interface mode.
2016-05-04 16:14:29 +03:00
385ed31a45
make files update
2016-04-29 10:17:35 -04:00
3f5e1e1203
ad9361- dev_if module name change
2016-04-29 10:17:35 -04:00
89f5d2394e
altera- clock variations
2016-04-29 10:17:35 -04:00
Lars-Peter Clausen
Adrian Costina
Istvan Csomortani
Rejeesh Kutty
Istvan Csomortani
AndreiGrozav
Dragos Bogdan
Shrutika Redkar
Matthew Fornero
István Csomortáni