5baa015246
kc705_base: Delete timing constraints
2014-11-13 16:30:37 +02:00
3915f7d5f4
daq2: kcu105 dma-fifo changes
2014-11-12 15:25:13 -05:00
d79e95b774
daq2: dma-fifo changes
2014-11-12 15:24:54 -05:00
074662a622
dmafifo: common interface with fifo2s
2014-11-12 15:24:31 -05:00
855919ee8e
plddr3: internal buswidth/clock conversion
2014-11-12 14:43:50 -05:00
dbf5acde76
plddr3: internal buswidth/clock conversion
2014-11-12 14:43:49 -05:00
c6af2696b3
plddr3: internal buswidth/clock conversion
2014-11-12 14:43:48 -05:00
ce92d49565
adv7511: Updated VC707 project to include linear flash
2014-11-12 11:46:01 +02:00
897f5e219d
ad9625_zc706: Update GT configuration
2014-11-11 19:25:30 +02:00
776a396141
adi_project.tcl: Add new message severity definition
...
Set "Parameter does not exist!" message severity to error.
2014-11-11 19:20:40 +02:00
8147fa0eb6
fmcomms7: asymmetric no of lanes
2014-11-11 08:54:27 -05:00
439cbecf7c
fmcomms7: asymmetric no of lanes
2014-11-11 08:54:26 -05:00
b96a8d01c3
fmcomms7: asymmetric no of lanes
2014-11-11 08:54:25 -05:00
97fa063341
fmcadc3: Fix pre-processing of ADC data
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-11-11 11:49:40 +01:00
4ccece5c8d
fmcadc3: Add a chip-select decoder to support up to 7 devices
...
This is required for the fmcadc3 board as it features 7 chips all
connected to the same SPI bus (ad9528, ad9234 x2, ada4961 x4).
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-11-11 11:49:40 +01:00
05ed98f884
common: Updated common constratins for ac701, kc705, vc707, zc702
2014-11-11 12:35:44 +02:00
c1268f089d
scripts: hp/mem updates
2014-11-10 15:06:20 -05:00
3211964c2e
ad6676evb: added
2014-11-10 13:41:01 -05:00
4c0d053055
fmcomms7: compilation fixes
2014-11-10 13:26:28 -05:00
b85c552e43
fmcomms7: constraint updates
2014-11-10 13:26:27 -05:00
87000d7a23
fmcomms7: board updates
2014-11-10 13:26:26 -05:00
82048866dd
fmcomms7: initial updates
2014-11-10 13:26:25 -05:00
c72a04cecf
fmcomms7: initial updates
2014-11-10 13:26:24 -05:00
4d915d539f
fmcomms7: initial updates
2014-11-10 13:26:23 -05:00
0560bd5f99
fmcomms7: initial updates
2014-11-10 13:26:21 -05:00
cbcdf4a2aa
fmcomms7: initial updates
2014-11-10 13:26:20 -05:00
1edef2b8ff
fmcomms7: initial updates
2014-11-10 13:26:19 -05:00
12896c7624
fmcomms7: daq2 copy
2014-11-10 13:26:18 -05:00
50ce2e30be
daq2: ila changes for kcu105 timing
2014-11-10 10:57:35 -05:00
1d73adcbc4
fmcadc3: zc706: Allow to enable pairs of channels and sign-extend data
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-11-07 18:09:00 +01:00
c33d3dd0af
fmcadc3: zc706: Connect DMA interrupt line
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-11-07 18:08:24 +01:00
ad08c62b36
fmcomms2: Updated zc702 project. Updated interrupts. Updated constraints
2014-11-07 14:01:55 +02:00
4e11e39956
fmcomms2: Updated zed project
...
- Updated interrupt system to the latest implementation
- Fixed constraints
2014-11-07 13:59:46 +02:00
962df53946
fmcomms2: Updated kc705 project to vivado 2014.2.
...
- Updated interrupt system to the latest implementation
- Fixed constraints
- Used ad_iobuf
2014-11-07 13:58:40 +02:00
db18ed4af2
fmcomms2: Updated ac701 project to vivado 2014.2.
...
- Updated interrupt system to the latest implementation
- Fixed constraints
- Used ad_iobuf
2014-11-07 13:56:00 +02:00
7e2a9ce569
fmcomms2: Updated base design interrupt system for microblaze
2014-11-07 13:54:43 +02:00
0ade2a5f67
fmcomms5: Updated project to vivado 2014.2. Updated interrupt system. Fixed constraints
2014-11-07 13:45:15 +02:00
2d9a529ab8
kcu105: ddr - 800M
2014-11-06 16:50:37 -05:00
abad8ddc28
ad9625x2: fix ila connection
2014-11-06 14:22:46 -05:00
a2a2552c60
ad9625_vc707: Update project to support linear flash interface
2014-11-06 15:01:58 +02:00
d55ddc4da5
ad9625_vc707: Delete SEG_axi_bram_ctl_mem memory segment
2014-11-06 15:01:12 +02:00
0ffb1095d9
Revert "ad9625_vc707: Fix source file definition"
...
This reverts commit 6c80d88a0c
2014-11-06 14:59:08 +02:00
6b7fccf56b
ad9625_fmc: Preserve the IRQ layout
2014-11-06 12:20:26 +02:00
0425202da5
fmcadc3: compilation fixes
2014-11-05 11:59:10 -05:00
fcd015305c
ad9625x2_fmc: Updated vc707 project to include linear flash
2014-11-05 17:19:35 +02:00
4634a4f868
vc707: Added linear flash to the base design
2014-11-05 17:18:40 +02:00
f1c5173a12
motor_control: Renamed the project to motcon1_fmc
2014-11-05 09:51:18 +02:00
0f1bc27e27
fmcadc3: Connect adc_dwr and dma_ready to ILAs
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-11-04 18:09:30 +01:00
d7ba7a95a6
fmcadc3: Update to use latest DDR3_fifo IP
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-11-04 18:09:30 +01:00
6c80d88a0c
ad9625_vc707: Fix source file definition
...
The project using "p_sys_dmafifo" process, from sys_axi_dmafifo.tcl.
2014-11-04 15:21:25 +02:00
80646a641b
ad9625x2_fmc: constraints order changes
2014-11-03 15:02:35 -05:00
56e65f5926
ad9625x2_fmc: add dma fifo
2014-11-03 15:02:00 -05:00
8c0782cb74
ad9625x2_fmc: constraints changes
2014-11-03 15:01:40 -05:00
beee377fb7
ad9625x2_fmc: interrupts fix
2014-11-03 15:01:15 -05:00
8e6cb2bad4
ad9625x2_fmc: dma fifo additions
2014-11-03 15:00:51 -05:00
7ad9340992
pmod_ad7175: Connect gain control pin
...
Connect the gain control pin to GPIO32 of the ZYNQ.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-11-03 15:00:02 +01:00
4eea04cc9d
fmcadc3: zc706: Fix DMA enable connection
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-11-03 14:45:16 +01:00
57137df018
fmcjesdadc1_zc706: Interrupt update
2014-11-03 13:02:09 +02:00
4f815b99a1
kc705_base: Fix sys_concat_intc input connections
...
All the unused input pins need to be connected to ground.
2014-11-03 13:02:08 +02:00
8ef3eada7d
adv7511_ac701: Interrupt update
2014-11-03 13:02:07 +02:00
98b92c4bc1
adv7511_kc705: Interrupt update
2014-11-03 13:02:06 +02:00
0246a40e28
adv7511_vc707: Interrupt update
2014-11-03 13:02:05 +02:00
f7588131da
ac701_base: Interrupt update
2014-11-03 13:02:04 +02:00
b92636c6eb
kc705_base: Interrupt update
2014-11-03 13:02:03 +02:00
25f37ffce7
usdrx1: Added cpld configuration files
2014-11-03 12:54:54 +02:00
99ad286c41
kcu105: adv7511 updates
2014-10-31 13:28:17 -04:00
8ed9d10502
ad9625_fmc: disable sync
2014-10-31 13:05:18 -04:00
6f5a268909
fmcomms1: ZC706, updated project with latest constraints and interrupts
2014-10-31 17:59:56 +02:00
a84397d345
motor_control: Changed the encoder pins mapping.
2014-10-31 17:37:28 +02:00
356e1c7ac1
motor_control: Changed the encoder pins mapping.
2014-10-31 17:08:18 +02:00
3c78d8fe58
ad9265_fmc: Added correct fifo to ILA. Updated interrupts
2014-10-31 14:49:29 +02:00
6fac294b6f
fmcomms2: Updated zc706 project to new interrupt system
2014-10-31 14:15:29 +02:00
91ea11041d
prcfg_mitx045: Upgrade of the project script.
...
- the design using the common PN monitor
- the first implemented logic will be the qpsk, to get a better result
- cosmetic changes
2014-10-31 12:18:00 +02:00
e450e78f13
prcfg: Update design to Vivado 2014.2
2014-10-31 12:05:19 +02:00
860a7caa56
prcfg: dac and adc to dma interface width is 64
2014-10-31 12:04:34 +02:00
ea194755e1
prcfg: Upgrade the QPSK logic
...
Regenerate the qpsk logic, with the new HDL coder, and modify the design to support the new files.
2014-10-31 11:59:29 +02:00
16cdae3001
mitx045_base: Delete unnecessary timing constraints.
2014-10-31 11:50:49 +02:00
07673b673a
adv7511_mitx045: Interrupt update
2014-10-31 11:46:27 +02:00
67bec719f7
mitx045_base: Interrupt update
2014-10-31 11:45:33 +02:00
b9f800ff65
fmcadc3: zc706: Fix connection to the system clock
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-10-31 11:06:16 +01:00
21f99b1c97
daq2: remove ila for kcu105
2014-10-30 15:26:29 -04:00
56859ad4c9
sys_dmafifo: use internal memory
2014-10-30 15:26:28 -04:00
5bd00df33a
adv7511_zc706: Interrupt update
2014-10-30 19:02:16 +02:00
d81484a6f3
adv7511_zed: Interrupt update
2014-10-30 19:01:17 +02:00
7ae003cf82
zed_base: Interrupt update
2014-10-30 19:00:05 +02:00
e0b7ef2f4f
scripts: Update scripts for PR design flow
...
+ Rewrite the pr_verify process, to improve verification time
+ Update the implementation flow: always the biggest logic will be implemented first, to achieve a better result
therefore force the tool to optimize the first logic with 'ExploreSequentialArea'
+ Make utilization report just from the PR pblock, that's more relevant as the utilization report of the whole fabric
2014-10-30 18:51:13 +02:00
02b32abefe
adv7511_zc702: Interrupt update
2014-10-30 18:42:14 +02:00
ba53e156e3
ZC702_base: Interrupt update
2014-10-30 18:39:49 +02:00
f595b86576
kcu105: lutram constraints for ies
2014-10-30 11:20:27 -04:00
d0a70380bf
kcu105: lutram constraints for ies
2014-10-30 11:19:55 -04:00
4c0e4d280f
dmafifo: internal version- light duty
2014-10-30 11:12:13 -04:00
360e7104b6
dmafifo: axi version- heavy duty
2014-10-30 11:12:12 -04:00
cfa1a93441
Merge branch 'dev' of https://github.com/analogdevicesinc/hdl into dev
2014-10-30 08:42:09 +01:00
56374cf592
usdrx1: Added synchronization, updated constraints, added timing check for a5gt project
2014-10-29 19:29:42 +02:00
cc265b6b9c
daq2/daq3/ad9625_fmc: Connect ADC DMA xfer_req signal
...
For proper operation the xfer_req signal needs to be connected from the ADC DMA to the DDR FIFO.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-29 18:15:54 +01:00
8c789104a6
ad9671: Fixed constraints. Modified system_timing.tcl so that it will fail if timing are not met
2014-10-29 18:25:56 +02:00
2e01ad2eec
ad9625_fmc/zc706: ps7 interrupt updates
2014-10-29 12:13:44 -04:00
b7946febfa
Merge branch 'dev' of https://github.com/analogdevicesinc/hdl into dev
2014-10-29 08:50:51 +01:00
f83622a2e6
daq2/kcu105: interrupt updates
2014-10-28 15:51:42 -04:00
4788d09620
vc707: interrupt updates
2014-10-28 15:42:55 -04:00
c9691fac64
ad9625_fmc: merge zc706 and vc707
2014-10-28 10:12:19 -04:00
627da6161b
ad9625_fmc: remove dma clock for now - zynq/non-zynq merge
2014-10-28 10:12:18 -04:00
36c7034bd6
ad7175: Fix dma issues
2014-10-28 16:00:06 +02:00
9e1d1c1b49
ad7175: Updated the AD7175 IP and project
2014-10-28 14:28:38 +02:00
fd66affa42
scripts: add default memory interconnect
2014-10-27 15:53:20 -04:00
fc4e002150
scripts: add mb cpu side
2014-10-27 15:53:19 -04:00
4f15f5c34c
adv7511: Update interrupts.
...
The ad_interrupts.v was used to concatenate the interrupts.
2014-10-27 19:48:05 +02:00
a870603db5
common_bd: Update the common block designs to the new IRQ path
...
Avoid the use of xil_concat module by using the ad_interrupts.
2014-10-27 19:44:25 +02:00
d04a545a41
fmcomms2: updated zc706 project with new constraint style
2014-10-27 19:27:36 +02:00
61c769e035
kc705: daq2 updates
2014-10-27 09:59:57 -04:00
d1e3993bd0
kcu105: daq2 updates
2014-10-27 09:59:56 -04:00
d471b61f3e
fifo: merge zynq and non-zynq
2014-10-27 09:59:54 -04:00
8b4d70eac6
daq2: merge zc706 and kcu105
2014-10-27 09:59:53 -04:00
54f341fad8
scripts: sdk export before timing check
2014-10-27 09:59:52 -04:00
4494998940
scripts: ignore another variant of reset warning
2014-10-27 09:59:51 -04:00
10b898a62d
zed_base: Fix IRQ layout.
...
Just a temporally fix of IRQ layout.
2014-10-27 14:46:26 +02:00
3645139e59
fmcomms6: Avoiding redefinition of system clocks.
2014-10-23 12:55:56 +03:00
dd5d57843d
fmcomms6: Update version of the ILA core
2014-10-23 12:30:55 +03:00
3dbfa8cda6
ad9434_fmc: Fix PN monitor and device interrupt
2014-10-23 11:29:14 +03:00
24e11b30b9
ad7175_zed: added the ad7175 ZED project
2014-10-23 06:15:17 +03:00
20d59ce39b
daq2: dma fifo modifications
2014-10-22 16:39:28 -04:00
4eeb50114f
daq2: rebase conflicts
2014-10-22 16:39:17 -04:00
43cdafe1e2
kcu105: iic-rstn removed
2014-10-22 16:33:52 -04:00
43fe20d141
Merge branch 'dev' of https://github.com/analogdevicesinc/hdl into dev
2014-10-22 17:19:37 +02:00
dcdba475f7
vc707_common: Fix net name sys_100m_resetn
2014-10-22 15:41:36 +03:00
a0d27a117c
usdrx1: Updated project with new synchronization mechanism. Fixed timing constraints
2014-10-22 13:20:44 +03:00
cd9033296c
ad9671_fmc: Fixed constraint files
2014-10-22 13:14:59 +03:00
17675863e0
all_projects: Fix the interrupt connections to preserve IRQ layout
2014-10-22 11:48:08 +03:00
767179dce9
adv7511_zc706: Fix IRQ layout
...
Fix IRQ connection, this layout works on Linux
2014-10-21 17:44:28 +03:00
2beaeb9176
projects/daq2/kcu105/system_constr.xdc: temp constrains
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-10-21 15:03:55 +02:00
8a4ab4e05a
projects/ad9434_fmc/common/ad9434_bd.tcl: Fix freeze - Design doesn't use SYNC
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-10-21 15:03:55 +02:00
d4a21d9775
ad9625_fmc: constraints fix
2014-10-20 10:00:39 -04:00
b3c784f76a
ad9467_fmc: Made some cosmetic changes on the block design script.
2014-10-20 13:28:34 +03:00
4b8720b551
fmcomms2_zc706: Remove top level constraints
...
Remove all the unnecessary top level constraint definitions.
2014-10-20 13:25:01 +03:00
7115864b4c
ad9434_fmc: Remove top level constraints
...
Remove all the unnecessary top level constraint definitions.
2014-10-20 13:23:37 +03:00
5deffd57b1
zed: Remove top level constraints
...
Remove top level constraints from the ZED base design.
2014-10-20 13:20:27 +03:00
0c56e5b912
ad9434_fmc: Fix GPIO width
...
GPIO port width is 15 instead of 32
2014-10-20 10:59:30 +03:00
7f8270d74b
ad9625_fmc: generic dma fifo for zynq and non-zynq boards
2014-10-17 14:38:16 -04:00
0b30f98640
ad9625_fmc/zc706: remove top level constraints
2014-10-17 14:38:15 -04:00
f3c9627cae
adi_project: demote reset warnings to info
2014-10-17 14:38:13 -04:00
14ccdaaa78
kcu105: removed spdif reset
2014-10-17 14:00:00 -04:00
380eeec013
daq2/kcu105: ethernet fix
2014-10-17 13:48:35 -04:00
fca0714478
adv7511/kcu105: ethernet fix
2014-10-17 13:48:33 -04:00
e73b3b52dc
kcu105: ethernet fix
2014-10-17 13:47:50 -04:00
2600b1f359
daq3: tx interleave and dma fifo axi streaming
2014-10-15 14:51:04 -04:00
6d76e0b768
zc706: remove top level constraints
2014-10-15 14:51:02 -04:00
5715c5b28f
dmafifo: axi stream interface
2014-10-15 14:50:57 -04:00
0aed11fa6c
adi_project: demote useless warnings
2014-10-15 14:50:54 -04:00
4d4a7981f2
fmcomms1: Connect DMA controller directly to the HP ports
...
The AXI DMAC controller nativly supports AXI3, there is no need to insert a interconnect to do protocol conversion.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:46:07 +03:00
7d3be14ab5
common: Connect audio clkgen reset
...
While we are at it also hide the unused locked pin.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:44:46 +03:00
Istvan Csomortani
Rejeesh Kutty
Adrian Costina
Paul Cercueil
acozma
Lars-Peter Clausen
Michael Hennerich