9e8fd8ed9e
base_design: External IIC reset is connected to Vcc
...
External IIC reset is connected to Vcc in case of AC701, KC705 and VC707
2014-12-11 11:14:54 +02:00
842ba19aaa
fmcomms2/ml605: compilation fixes
2014-12-09 14:31:12 -05:00
d7a6b5e6d0
fmcomms2/ml605: compilation fixes
2014-12-09 14:31:11 -05:00
d57b6b01c6
fmcomms2/ml605: compilation fixes
2014-12-09 14:31:10 -05:00
9103f6706e
Merge branch 'hdl_2014_r2' of https://github.com/analogdevicesinc/hdl into hdl_2014_r2
2014-12-09 17:38:37 +01:00
138e789fb6
projects/fmcjesdadc1/common/fmcjesdadc1_bd.tcl: Fix interrupts
...
sys_concat_intc: don't reset NUM_PORTS to 6
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-09 17:38:16 +01:00
0c6cbdd303
fmcadc4: fifo updates
2014-12-09 10:38:51 -05:00
f044ab94e0
fmcadc4: fifo updates
2014-12-09 10:38:50 -05:00
e2a9502e1e
fmcadc4: fifo updates
2014-12-09 10:38:49 -05:00
a2607a8057
fmcadc4: fifo updates
2014-12-09 10:38:47 -05:00
2e4640d5c5
ad9467_kc705: Fix memory segment offset for SEG_axi_ddr_cntrl
2014-12-09 16:17:46 +02:00
c4152627f0
plddr3: Sync adc_wcnt_int to adc_wr and fix adc_dwr pulse width
...
The adc_wcnt_int must be synchronized to adc_wr. The adc_dwr signal pulse width was to long,
it needs to be just one adc_clk cycle.
2014-12-09 13:59:19 +02:00
a0d5e7862e
ad9467_kc705: Fix typos.
2014-12-09 12:07:49 +02:00
915ee7a268
fmcjesdadc1_kc705: Connect the SPI interrupt to the controller
2014-12-09 11:54:16 +02:00
ee04eb637b
ad9467_kc705: Fix interrupts
2014-12-09 11:54:08 +02:00
6aad2fbbb2
axi_hdmi_tx: Fixed typo in altera related core
2014-12-09 10:19:03 +02:00
abff7097f6
daq3: compilation fixes - latest changes
2014-12-08 14:50:03 -05:00
8a72a6a0dc
daq3: compilation fixes - latest changes
2014-12-08 14:49:52 -05:00
7c3ed75b79
daq3: compilation fixes - latest changes
2014-12-08 14:49:40 -05:00
40287f4d97
remove fmcadc3
2014-12-08 14:39:43 -05:00
b6b5759662
Merge branch 'hdl_2014_r2'
...
Conflicts:
library/axi_ad9234/axi_ad9234.v
library/axi_ad9234/axi_ad9234_channel.v
library/axi_ad9234/axi_ad9234_constr.xdc
library/axi_ad9234/axi_ad9234_if.v
library/axi_ad9234/axi_ad9234_ip.tcl
library/axi_ad9234/axi_ad9234_pnmon.v
library/axi_ad9434/axi_ad9434.v
library/axi_ad9434/axi_ad9434_core.v
projects/ad9434_fmc/common/ad9434_bd.tcl
projects/ad9467_fmc/common/ad9467_bd.tcl
projects/common/kc705/kc705_system_bd.tcl
projects/common/kcu105/kcu105_system_bd.tcl
projects/common/mitx045/mitx045_system_bd.tcl
projects/common/vc707/vc707_system_bd.tcl
projects/common/zc706/zc706_system_bd.tcl
projects/daq1/common/daq1_bd.tcl
projects/daq1/zc706/system_top.v
projects/fmcomms1/ac701/system_top.v
projects/fmcomms1/common/fmcomms1_bd.tcl
projects/fmcomms2/ac701/system_constr.xdc
projects/fmcomms2/common/fmcomms2_bd.tcl
projects/fmcomms2/zc702/system_constr.xdc
projects/usdrx1/common/usdrx1_bd.tcl
2014-12-08 14:25:00 -05:00
82b9ebe23d
remove replaced projects
2014-12-08 10:45:12 -05:00
19e4950b72
renamed to match official names
2014-12-08 10:44:15 -05:00
84174460bb
projects/common/kcu105/kcu105_system_bd: Restore axi_ethernet SupportLevel 0
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-05 14:50:45 +01:00
bb6cc40902
projects/common: KCU105 VC707 update and sync axi_ethernet:6.1 features
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-05 14:50:45 +01:00
8e4d0a1b60
projects/common: KCU105 VC707 KC705 sync microblaze core defaults
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-05 14:50:45 +01:00
4c05e8de5d
motor_control: Updated project to Vivado 14.2. Temporary removed XADC
...
- fixed constraints
- updated interrupt system
- used ad_iobuf
- The XADC was removed because the XADC IPI generates vaux inputs 0 and 10 even if 0 and 8 are selected
2014-12-05 11:48:00 +02:00
ea1a50c985
axi_mc_speed: updated core to latest axi interface implementation
2014-12-05 11:46:20 +02:00
0d2888a5a6
axi_mc_current_monitor: updated core to latest axi interface implementation
2014-12-05 11:45:37 +02:00
21591dc485
axi_mc_controller: updated core to latest axi interface implementation
2014-12-05 11:43:59 +02:00
11f41d1dff
zynq_plddr3: Fix PLDDR3's Reset Generator
...
Reset generator's external reset signal was active low, but the GT reset is active high, and both the DDR controller and FIFO2S were in reset.
Therefore the external reset active state is changed to active high. This setup in general is made by the tool automatically, in order to do it correctly, need to
set this two property of the reset generator.
2014-12-04 15:42:28 +02:00
324c0528c2
fmcomms6: Better cope with higher sample rates
...
There can be a rather high latency between the last byte of a burst has been send and the time the response for the burst is received. Running at high samplerates this can cause the internal DMA store and forward FIFO to fill up and subsequently stall the DMA pipeline and drop samples. To better cope with the situation double the size of the internal FIFO. Also increase the clock of the AXI bus to be able to accommodate a samplerate of 310MHz.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 13:28:37 +01:00
46156b7ceb
fmcomms6: Add DMA overflow signal to ILA
...
This is useful for debugging DMA overflows.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 13:28:37 +01:00
56a8a54080
ad9625x2_fmc: Increase the dma fifo data depth
2014-12-03 12:13:08 +02:00
757c213165
ad9625x2_fmc: Integrate the dac spi interface into the SPI interface
2014-12-03 12:06:43 +02:00
805d52346c
fmcomms7: compilation fixes on plddr3
2014-12-02 10:39:01 -05:00
f01d1aae2d
fmcomms7: compilation fixes on plddr3
2014-12-02 10:38:44 -05:00
95e113e1a3
fmcomms6: Connect DMA directly to the HP port
...
The axi_dmac supports native AXI3, there is no need to add a interconnect
for protocol conversion between it and the HP port.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
45fc7bb7e2
fmcomms6: Set ila type to native
...
With version 4.0 ila defaults to the AXI monitor type, so explicitly
configure it for native.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
5b68b79dec
ad9467_fmc: Set ila type to native
...
With version 4.0 ila defaults to the AXI monitor type, so explicitly
configure it for native.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
6197563506
up_axi: Fix up_raddr/up_waddr port width
...
Make sure that the port declaration width matches with the reg declaration
later on.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
d5422c2ecc
fmcomms2: Zed, fixed iic multiplexer ad_iobuf connections
2014-11-28 14:17:09 +02:00
d5a1df2fe6
usdrx1_zc706: Update interrupts.
2014-11-27 14:06:13 +02:00
eed1981ede
usdrx1_fmc: Fix GT lane number definition.
2014-11-27 14:05:54 +02:00
a576f7dc98
ad9671_zc706: Update interrupts
2014-11-27 14:05:43 +02:00
0ccc546aeb
ad9671_fmc: Fix GT lane number definition
2014-11-27 14:05:34 +02:00
ee7d427123
ad9671_fmc: Cosmetic changes
...
Delete trailing whitespaces.
2014-11-27 14:05:24 +02:00
419d38b9f6
kc705_base: Define sys_addr_mem_seg for dmafifo
2014-11-26 15:38:41 +02:00
6fd2f8c913
daq2_fmc: Update interrupts
...
Update interrupts for ZC706 and KC705 carrier.
2014-11-26 15:38:24 +02:00
bfd89dc9c7
daq2_kc705: Fix constraint file
...
I/O standard for trig_[p/n] is LVDS_25
2014-11-26 15:38:10 +02:00
Istvan Csomortani
Rejeesh Kutty
Michael Hennerich
Adrian Costina
Lars-Peter Clausen