e4ce00f7fb
axi_ad9680: register map changes
2014-07-02 12:50:09 -04:00
7e5748374d
prcfg_lib: Fixed prbs generator for QPSK
2014-07-02 18:14:35 +03:00
8eb7a55797
prcfg_lib: Fixed the gpio status merge logic
...
The previous logic did not passed implementation.
2014-07-02 18:09:48 +03:00
9089877c70
prcfg_lib: Fixed the sine tone generator for BIST
2014-07-02 18:00:43 +03:00
8a2b29cdbe
axi_damc: Add xfer_req to the FIFO source interface
...
The xfer_req signal will be high if DMA core the is expecting data.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-07-02 16:05:16 +02:00
31abd07613
axi_ad9144: register map changes
2014-07-01 21:43:04 -04:00
60dd14bcdb
a5soc: removed jtag master control
2014-07-01 12:27:37 -04:00
b6052773b7
added adc/dac gpio registers
2014-06-27 14:45:58 -04:00
ba7955c531
fmcomms2: register map modifications
2014-06-26 10:09:03 -04:00
4afe6c24e9
Merge branch 'devel' of github.com:analogdevicesinc/hdl into devel
2014-06-25 15:26:21 -04:00
10a7804e14
ad9361: altera wrapper updates
2014-06-25 15:26:06 -04:00
4fdb3cfc4a
ad9250: register map updates
2014-06-25 15:23:57 -04:00
4f5d163fcc
Merge branch 'master' into devel
2014-06-25 13:07:12 -04:00
e38813fa9f
fifo- monitor status signals
2014-06-25 12:15:13 -04:00
4877df9bec
axi_fifo2s: make read dead slow
2014-06-25 09:20:57 -04:00
985ace533e
ad9361: remove unused modules
2014-06-24 14:26:40 -04:00
6b3312bbf9
library: register map changes and for mathworks
2014-06-24 14:24:22 -04:00
d4be46cc17
library: register map changes and for mathworks
2014-06-24 14:23:56 -04:00
e650253013
library: register map changes and for mathworks
2014-06-24 14:22:05 -04:00
89961c8dd7
prcfg_lib: Update the PR libraries
...
+ Flop the control nets too inside the adc/dac module
+ Flop the gpio_out in prcfg_top
2014-06-13 20:35:35 +03:00
7efd6149f8
daq2: initial checkin
2014-06-12 15:54:25 -04:00
87bec07a22
ad9625: added multi-sync support
2014-06-12 15:45:34 -04:00
5189d200e7
axi_fifo2s: linux fix on interfaces
2014-06-12 15:30:13 -04:00
3e5990366e
axi_ad9625: initial release
2014-06-09 16:39:08 -04:00
bef6a9c32c
axi_ad9361: Split dma data into individual channels for both ADC and DAC
2014-06-07 17:15:31 +03:00
cf56a568c6
kcu105: GTH updates
2014-06-05 14:27:38 -04:00
ea22d29862
prcfg: Initial check in of PR modules
...
Initial check in of the partial reconfiguraiton modules.
2014-06-05 14:58:14 +03:00
5b5bca400f
ad9361: added adc loopback
2014-05-27 14:47:59 -04:00
842cd98b61
ad9361: adc loopback option
2014-05-27 12:15:02 -04:00
56ddce1e8c
dmac: create fifo interface to avoid being treated as axi control stream
2014-05-27 10:25:14 -04:00
0cd43e34f5
dds: zero scale fix
2014-05-21 11:54:49 -04:00
916afd460f
axi_jesd_gt: synchronization support
2014-05-19 14:17:31 -04:00
3aed3ba71c
axi_ad9361: fmcomms5 changes
2014-05-19 12:41:12 -04:00
f73819f4d4
zc706: pl ddr3 initial checkin
2014-05-13 16:19:53 -04:00
a007add714
iqcorrection: missing input signals fix
2014-05-09 11:17:50 -04:00
f3f8374c75
ad9671: 2lane version
2014-05-08 18:33:26 -04:00
1d50489870
ad9361: ml605 updates
2014-05-05 11:03:57 -04:00
5f2fb45b24
library: ported hdmi tx to altera
2014-05-02 12:07:47 -04:00
a10043c4f4
kcu105: base complete with ethernet errors
2014-04-30 14:41:43 -04:00
ef60cce15e
kcu105: added
2014-04-30 14:41:40 -04:00
f55288ef5d
ad9671: altera - base changes
2014-04-28 21:31:18 -04:00
02e8b27626
initial checkin-9250 copy
2014-04-28 21:31:16 -04:00
01de117b5f
motor_control: Changed controller to PID controller. Some estetic changes
2014-04-28 17:57:51 +03:00
fa998a406b
dma: parameter fix
2014-04-24 15:50:16 -04:00
314ec3d343
altera-9250/dma: make id width generic
2014-04-24 14:54:19 -04:00
dfc2bba335
ad9671: updates to allow default adc setup routines
2014-04-23 16:39:28 -04:00
213e852e11
motor_control: Initial commit
2014-04-18 18:57:18 +03:00
503096de18
gt: change userready on drp clock
2014-04-17 16:09:55 -04:00
570ec26798
FMCOMMS2: Added sync option
2014-04-11 18:14:48 +03:00
99ef34936f
Merge branch 'master' of https://github.com/analogdevicesinc/hdl
2014-04-11 18:14:08 +03:00
c73390b6c9
axi_ad9361: Intermediary check in for altera porting
...
This is work in progress. It will not work as it is
2014-04-11 17:40:34 +03:00
af07f8874f
wfifo/rfifo: asynchronous interface
2014-04-10 14:01:40 -04:00
96541f0a7f
usdrx1: zc706 updated for usdrx1
2014-04-10 11:05:13 -04:00
dc7b3e085c
axi_dmac: Fix issues with non 64-bit AXI masters
...
Make sure that the address generator behaves correctly when the buswidth is not
64-bit. Also since the source and destination can have different widths add
separate parameters for source and destination address alignment.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 14:54:22 +02:00
36ef882da0
axi_dmac: data_mover: Improve timing
...
We do not know which 'last' condition to use before hand, but we can pre-compute
the result for both conditions and then use them. This removes the comparison
from the already pretty long combinatorial path.
Also simplify a few expressions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 14:06:44 +02:00
090d3aee04
axi_dmac: Change C_DMA_LENGTH_WIDTH default to 24
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
cb630e36a9
axi_dmac: src_fifo_inf: Simplify data path
...
Improves timing a bit
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
f9ca4fb8be
axi_fifo: Slightly improve timing
...
It is OK to overwrite invalid data with other invalid data.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
4c9647f289
axi_dmac: axi_register_slice: Provide default values for registers
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
fa5ba6c09d
axi_dmac: Make cyclic mode runtime configurable
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
7ca43f4920
axi_dmac: address_generator: Make 'len' registered
...
Slightly improves the timing.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
66e6c1cc21
axi_dmac: axi_register_slice: Remove reset "latch" from datapath
...
Move the datapath updates out of the else branch of the reset condition.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
799d2384d8
up_xfer_cntrl: Remove extra semicolon
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-04-10 13:50:39 +02:00
9d19145713
Merge branch 'master' of https://github.com/analogdevicesinc/hdl
2014-04-10 10:50:53 +03:00
5aac9d7288
FMCOMMS2 added sync option
...
Added signals to allow synchronisation of multiple AD9361.
2014-04-10 10:46:42 +03:00
e73952a694
ad9467 : initial checkin
2014-04-09 17:34:40 +03:00
8bebc5e3d4
ad9671: initial checkin
2014-04-07 13:01:10 -04:00
f8f2684b7e
up_gt: eyescan delay bug fix
2014-04-02 16:45:41 -04:00
e85153b5dd
altera hal version
2014-04-01 21:12:11 -04:00
80e5051894
axi_jesd_gt: initial checkin
2014-04-01 15:14:28 -04:00
2472d61daf
ad_gt_es: status asserted early for latency
2014-04-01 15:06:51 -04:00
0d678b89ed
altera a5gt fmcjesdadc1 setup
2014-04-01 11:46:37 -04:00
724bd70a06
altera additions and replacements
2014-04-01 11:18:10 -04:00
25f416e46f
dds output is reset if disabled
2014-03-31 10:01:49 -04:00
d3d26e1220
lower the address space requirements
2014-03-26 11:03:45 -04:00
9b4539b7c2
axi_dmac: Add option to configure the FIFO size
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-26 12:51:35 +01:00
ca7a70650d
axi_dmac: Delay up_ack by one clock cycle
...
The read data also becomes available only with a delay of one clock cycle,
sending the ack too early will result in bogus register reads.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-25 14:35:52 +01:00
b3657b77cb
util_sync_reset: Fix polarity of the sync_resetn signal
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-25 13:03:12 +01:00
a230e6505a
axi_dmac: Add option to configure AXI standard
2014-03-25 12:47:27 +01:00
d0e26899a4
Add util_sync_reset helper module
...
This helper module can be used to make sure that a reset signal is de-asserted
synchronously to a clock signal. This is e.g. required by the AXI spec.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-24 22:43:01 +01:00
ef960a29c7
altera files
2014-03-24 13:27:27 -04:00
551319a670
Modified data mover to improve timing
2014-03-20 18:22:18 +02:00
e373b85954
axi_dmac: Fix Vivado warnings
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-18 20:59:13 +01:00
29d590c951
axi_dmac: response_generator: Do not generate responses during ID sync
...
During an ID sync the request_id might increment, we should not generate a
response in this case. Since the ID sync only happens when the core is disabled
check that the core is enabled before generating a response.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-18 19:12:13 +01:00
df1c4f0786
axi_dmac: data_mover: Improve timing
...
The pending_burst signal and the expression id != request_id are almost
identical. pending_burst goes high with a delay of one clock cycle, but the
important thing is that it goes low on the same clock cycle as the expression.
By using pending_burst here instead of 'id != request_id' we can reduce the
fanout of the 'id' register and improve the timing of the core.
2014-03-18 19:06:26 +01:00
522a222d3a
axi_dmac: Fix default value for DMA type
...
Vivado doesn't handle the case where we use symbolic constants for the default
value properly, so update this to use plain integers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-17 13:20:49 +01:00
ad491e92ab
changed pcore version and made it local (top shouldn't override)
2014-03-14 12:02:16 -04:00
f02ba999ae
axi_dmac: Add support for DMA bus widths other than 64 bit
...
There were a few place in the core where it assumed a 64-bit wide bus. Make this
configurable using parameters. The patch also adds support for having different
DMA bus widths on the source and destination side.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-13 13:20:10 +01:00
fd14607da5
mult instances: consistent naming style
2014-03-12 15:42:47 -04:00
64a89ff66b
Merge branch 'master' of github.com:analogdevicesinc/hdl
2014-03-12 15:36:00 -04:00
7fc5b8ecd9
common: use dsp slice for multiply modules
2014-03-12 15:35:21 -04:00
ba484999b3
Fix default value of $ad_hdl_dir and $ad_phdl_dir
2014-03-12 18:18:47 +02:00
cda3cb3280
removed misc stuff
2014-03-12 11:02:53 -04:00
92aaf0bd51
FMCOMMS1: Updated projects and axi_ad9643 core
...
ZC702: Removed invalid address segments. Changed the constraints
for adc_clk to minimum possible value in order to meet timing.
ZED: Change the constraints for adc_clk to minimum possible value, in
order to meet timing
AXI_AD9643: Corrected the number of bits in the adc_mon_data bus
2014-03-12 16:23:41 +02:00
580808e146
axi_ad9361: added
2014-03-11 20:01:55 -04:00
a76d6c4686
library/axi_ad9122,axi_ad9643: added
2014-03-11 12:13:25 -04:00
e1f23e7d49
Merge branch 'master' of github.com:analogdevicesinc/hdl
2014-03-11 09:58:34 -04:00
0817973cc0
library: removed xilinx dc filter and dds
2014-03-10 14:52:48 -04:00
f9dfd944c9
library/util_fifo: updates for read side
2014-03-10 14:48:14 -04:00
a6d747411e
util_wfifo: ip cleanup
2014-03-10 11:21:20 -04:00
Rejeesh Kutty
Istvan Csomortani
Lars-Peter Clausen
Adrian Costina
ATofan
U-ANALOG\ACostina
Istvan Csomortani