f43248c2bc
common/pzsdr*- removed
2016-11-18 11:32:43 -05:00
959055bd54
common/a5gt- updates
2016-11-10 16:56:35 -05:00
c6730ab2d7
fmcjesdadc1/a5gt- updates
2016-11-10 11:36:41 -05:00
8af0731bb0
a5gt- qsys2tcl flow
2016-11-10 11:30:18 -05:00
3cc416ca60
pzsdr1- fix typo on system_ps7
2016-11-09 12:04:30 -05:00
f0af8216ce
common/a5soc- device can not run at 100M cpu clock
2016-11-08 15:19:23 -05:00
d9cfccc05f
common/a5soc- gpio in/out separation
2016-11-08 15:19:02 -05:00
6b492b79db
a10soc - remove default assignments
2016-11-04 15:01:19 -04:00
8ea9beffaf
fmcjesdadc1- a5soc tcl updates
2016-11-04 15:01:19 -04:00
4e99c3be9a
a5soc- tcl flow updates
2016-11-04 15:01:19 -04:00
50552ce7d6
adrv9371x- altera updates
2016-10-27 09:25:00 -04:00
f752f0c9d7
a10soc- xcvr updates
2016-10-27 09:25:00 -04:00
cb97bc500a
hdlmake updates
2016-10-17 16:29:57 -04:00
721ee98a06
zcu102- misc fixes
2016-10-06 10:18:14 -04:00
baabe20766
common/zcu102- spi connections & clock
2016-10-05 14:01:59 -04:00
9afff7ae60
common/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
e40311eee9
adrv9371x: A10soc, connected DMAs through 128 bit SDRAM0 port at 175MHz
2016-09-29 09:14:37 +01:00
4239f64125
dacfifo- board pin warnings
2016-09-27 14:49:20 -04:00
751a66eb72
plddr3/zc706- board pin warning
2016-09-26 15:20:37 -04:00
2d307d5f58
a10soc: Added system reset bridge. Using F2SDRAM port used in the previous Qsys design
2016-09-24 10:06:35 +03:00
14ad1ea741
pzsdr- swap clear-up
2016-09-21 13:15:40 -04:00
143423e3b9
adrv9371x: A10SOC, fix Makefile and system scripts to be compatible with altera
2016-09-21 18:13:02 +03:00
cf9ac730a8
pzsdr1- new rev. board delays
2016-09-13 10:32:13 -04:00
40c9fc92c1
a10soc: Switched to tcl flow
2016-09-08 11:31:06 +03:00
0d095f5da9
a10gx: Added system_type variable in common design
2016-09-08 11:29:14 +03:00
b837883b98
pzsdr1/pzsdr1/pzsdr1_cmos_system_constr: Fixed voltage level selection
2016-09-01 17:16:59 +03:00
917da79da1
altera- source defaults for qsys-script
2016-08-30 11:50:36 -04:00
8192e755e1
altera- defaults
2016-08-30 11:50:36 -04:00
2e59f377e1
version_upgrade: Update ac701, mitx045 and zed common design to Vivado 2016.2
2016-08-29 09:50:46 +03:00
271029768c
pzsdr/cmos - swap==1
2016-08-26 10:31:00 -04:00
5cc2ab37a5
version_upgrade: Common ZC702 get an upgrade to 2016.2
...
Xilinx IP Clock Wizard updated to version 5.3
2016-08-26 10:20:04 +03:00
c6b065c349
zc706: Updated DDR3 dacfifo
2016-08-22 16:48:52 +03:00
5d0e08d92e
common/vc707- 2016.2 version
2016-08-17 10:36:19 -04:00
73413366bc
daq2/all - warnings fix
2016-08-17 10:36:00 -04:00
0694a5015d
kc705- 2016.2 version
2016-08-16 12:54:39 -04:00
8464816c82
dmafifo-split to adc/dac
2016-08-16 12:54:39 -04:00
4658686ae1
adrv9371x/a10soc: Misc changes for being able to run Linux
2016-08-16 11:56:25 +03:00
0b0aa8e6c0
Makefile: Add MMU option to altera makefiles
2016-08-11 17:46:54 +03:00
16ad0f4379
kcu105- 2016.2 update
2016-08-11 10:00:41 -04:00
285059aed0
kcu105: Don't use phy reset automation, as it's not supported for KCU105
2016-08-09 10:19:57 +03:00
452d4706d3
kcu105: Update base project to 2015.4.2
...
- change part to revision 1.1 of the board
2016-08-09 10:19:36 +03:00
c6f4def93d
altera- make mmu a make switch
2016-08-08 11:54:51 -04:00
418217dd10
pzsdr: Remove LED and button signals from PCIe carrier
...
Only the FMC carrier and the breakout board do have push buttons and LEDs.
They are not present on the PCIe carrier. So move the constraints to a
separate file that can be included by the projects that need them and
remove all LED and button related signals from the PCIe project.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
d60bce654c
Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools
2016-08-05 15:16:04 +03:00
52ae3ddd6c
a10gx: Updated common files to 16.0
2016-08-01 15:08:12 +03:00
9952a94efb
hdl-vivado-2016.2- ip version updates
2016-07-28 13:44:57 -04:00
62c7114d77
Enable bitstream compression for Xilinx projects
...
Enabling bitstream compression reduces the size of the generated bitstream.
This means on one hand it will consume less storage, which is especially
useful for the BOOT partition of the ADI images where we store BOOT.BIN
files for all supported platforms.
On the other hand a smaller bitstream is faster to load from the storage
medium and it is also faster to program to the FPGA. So it reduces the
overall boot time as well.
The only downside of bitstream compression is that the bitstream size is no
longer constant, but depends on the actual design and resource utilization.
This will not work with bootloaders that expect a fixed size.
When building a bitstream using the tcl scripts bitstream compression can
be disabled by setting the ADI_NO_BITSTREAM_COMPRESSION environment
variable.
Initial tests show a reduction of a round 50% in size for most ADI
projects.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-07-14 10:16:15 +02:00
c6c3622816
a10gx: Updated common design adding explicit clock frequency and synchronous reset deassertion
2016-06-30 10:59:29 +03:00
2e80dec513
adrv9371x/zc706: Update project with the new axi_dacfifo
2016-06-22 12:33:47 +03:00
eaf4d4a19d
makefile updates
2016-06-10 14:26:14 -04:00
625052f46e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
d53b06849e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
3516ec28b7
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
d10dd78094
kcu105: Update common design to 2015.4
2016-05-27 14:59:28 +03:00
d0b40afb45
zc706/common: Fix PL_DDR3 fifo integration script
2016-05-27 14:13:55 +03:00
aca3038919
axi_dacfifo: No overflow for DAC
2016-05-27 14:13:55 +03:00
81ade7f26c
axi_dacfifo: Fix resets
...
DMA side: axi_resetn is used to reset the address counters
DAC side: GT tx_rst is used to reset the last_address register
2016-05-27 14:13:55 +03:00
578376c8fe
axi_dacfifo: Add bypass logic
2016-05-27 14:13:55 +03:00
39d23032f1
daq2- qsys updates
2016-05-23 10:55:44 -04:00
72151bb1a6
a10gx: Updated base design to include MMU
2016-05-13 18:44:41 +03:00
f3f5353944
zcu102- updates
2016-05-10 15:40:41 -04:00
e8fbdd0f5d
zcu102: zynq ultrascale
2016-05-10 15:40:41 -04:00
89b20f2a35
c5soc- remove unused hps ports
2016-05-09 13:54:08 -04:00
4863a04132
axi_adc/dacfifo: Split the intergration script file
...
Split the integration script file into two separate script files. Rename the
integration processes names to be more meaningful.
2016-05-05 09:53:55 +03:00
92dcce1674
a10soc: default ports
2016-05-04 13:42:12 -04:00
e790e4c3ae
a10soc- complete qsys
2016-04-25 12:56:19 -04:00
d36d1263c5
a10soc- updates
2016-04-25 10:50:09 -04:00
82c4f75f13
a10soc- a10gx copy
2016-04-22 10:39:21 -04:00
8b2542b181
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:01:12 -04:00
679d471d75
Merge branch 'hdl_2016_r1' into dev
...
hdl_2016_r1 contains IP core upgrades to Vivado 2015.4.2 and hdmi_tx improvements.
2016-04-19 18:05:50 +03:00
8a574cd8ba
zc706_system_plddr3.tcl : Add integration process for the AXI_DAC_FIFO
2016-04-19 11:30:52 +03:00
736bbdd95a
pzsdr1- io updates
2016-04-11 16:12:21 -04:00
8a5a5082f3
pzsdr1- io updates
2016-04-11 16:12:09 -04:00
8e689f4594
pzsdr1- lvds/cmos constraints
2016-04-11 16:00:18 -04:00
68bc647472
pzsdr1- ddr board delays update
2016-04-06 15:30:27 -04:00
255b0ebd40
util_dacfifo: Add dac_xfer_out control
...
The dac_xfer_out control signal is asserted while the DAC reads back data. Should be connected to upack/dma_xfer_in.
2016-03-29 16:50:00 +03:00
657144d9a7
a10gx: Updated base design and DAQ2 to the new revision of the a10gx board
...
- tried using ATX PLL and fPLL for TX transceiver clocks, but could not get them to lock
- CMU PLL works correctly as temporary solution
2016-03-28 13:21:36 +03:00
373481360b
util_dacfifo: Add a bypass option to the FIFO
2016-03-21 14:14:43 +02:00
b555be25d5
kcu105: Update common design to 2015.4
2016-03-18 15:22:42 +02:00
6f03998b95
zc702: Updated common design to 2015.4
2016-03-15 15:21:22 +02:00
a0c5f46940
zed: Updated common design to 2015.4
2016-03-15 15:20:46 +02:00
9a258d5e4c
vc707: Updated common design to 2015.4
2016-03-15 15:20:02 +02:00
bcf5bd8137
mitx045: Updated common design to 2015.4
2016-03-15 15:18:31 +02:00
27f5f1dcbe
kc705: Updated common design to 2015.4
2016-03-15 15:17:53 +02:00
eb743e0e03
ac701: Updated common design to 2015.4
2016-03-15 15:17:02 +02:00
d282064103
zc706: Updated common design to 2015.4
2016-03-15 15:16:36 +02:00
561412e322
pzsdr-cmos swap
2016-03-11 11:25:58 -05:00
18f30c8dc8
pzsdr- cmos/lvds split
2016-03-04 10:39:48 -05:00
a2374f64bf
pzsdr- cmos/lvds split
2016-03-04 10:39:48 -05:00
e012d0519b
Merge remote-tracking branch 'origin/hdl_2015_r2' into dev
2016-02-26 13:39:39 -05:00
f6e64e42b0
kcu105: add ethernet idelaycntrl
2016-02-26 13:19:49 -05:00
377461e0d4
Merge branch 'hdl_2015_r2' into dev
2016-02-19 14:15:27 +02:00
0f37dd6424
fmcjesdadc1: Fixed project
...
- changed system_project.tcl so that all base designs to be included
- changed DMA properties to take into consideration the new parameter names
- changed reset bridges to asynchronous
- increased maximum burst size of the DMA bridge
- changed the data_width of the memory bus to 256, as with 512 timing violations may occur
- changed base addresses for the base system to be the same as in the previous release
2016-02-19 14:09:57 +02:00
43e03ca6f7
arradio: Updated project
...
- made the reset bridges asynchronous
- connected the arradio gpio to the CPU interconnect
2016-02-16 14:50:23 +02:00
ad9ecbbbb6
daq2: Updated a10gx project to quartus 15.1.1
2016-02-05 17:43:05 +02:00
b147e9c94a
pzsdr1- updates
2016-02-02 12:33:01 -05:00
170295161f
pzsdr1- xdc
2016-01-26 11:19:00 -05:00
44a382fc69
pzsdr1-added
2016-01-25 15:33:34 -05:00
d2b26720e6
common: microzed: Add clock, reset and interrupt support
...
In order for the base project to be usable by other projects it needs to
create the clock, reset and interrupt signals that are expected to exist.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
426490c394
common: Rename uzed to microzed
...
Everybody calls the MicroZed microzed in their projects. Don't deviate from
that to avoid potential confusion.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:18:57 +01:00
c397787001
uzed: updates
2016-01-11 15:36:01 -05:00
a610ebb413
uzed: zed-copy
2016-01-11 13:53:22 -05:00
650d426301
a10gx/base: set gpio to 32
2015-12-11 10:14:37 -05:00
f1b6577447
a10gx/base: separate gpio in/out
2015-12-10 16:04:54 -05:00
a0e67aad56
c5soc: Updated common design
2015-11-24 13:22:01 +02:00
597e9eae84
pzsdr: added ad9361 clock out
2015-11-16 15:53:29 -05:00
83399ef6ee
a10gx: Updated common project to work with Linux (enabled MMU)
2015-11-04 13:35:52 +02:00
9d2b8809df
Makefiles: Updated Makefiles
2015-10-23 10:44:27 +03:00
14bccb6062
pzsdr/ccfmc- rf card/tdd only on fmc
2015-09-22 15:54:53 -04:00
25f3f05c22
pzsdr- breakout + fmc updates
2015-09-18 15:33:50 -04:00
caec400378
pzsdr- make module default
2015-09-18 13:22:01 -04:00
236854c26f
pzsdr-cc-fmc updates
2015-09-18 12:46:42 -04:00
3ef94d559c
rfsom renamed to pzsdr
2015-09-18 11:18:59 -04:00
52d3f189a0
rfsom renamed to pzsdr
2015-09-18 11:18:01 -04:00
0021c7869d
kc705: Deactivated narrow burst support, as it's not needed
2015-09-16 19:02:17 +03:00
d81d8238a9
kc705: Updated mig project file
2015-09-08 16:42:23 +03:00
01c0fdc809
daq2/a10gx- ethernet fix
2015-09-02 14:31:15 -04:00
1ecd615f92
common/mitx045 : Fix the vdma interface of axi_hdmi_core
2015-09-02 16:33:30 +03:00
a67ae238f8
rfsom-ps7- ddr settings
2015-08-31 15:39:45 -04:00
212235189f
hdmi-tx- signal name changes
2015-08-28 13:48:33 -04:00
0e20277bc1
hdmi-tx- signal name changes
2015-08-28 13:48:33 -04:00
93fe70790d
hdmi-tx- signal name changes
2015-08-28 13:48:33 -04:00
810fced1ec
hdmi-tx- signal name changes
2015-08-28 13:48:33 -04:00
6e90ba24e4
rfsom- add rgmii iodelay constraints
2015-08-27 16:26:17 -04:00
3953ab5e22
rfsom- rgmii upgrade
2015-08-27 11:41:55 -04:00
74a6e33f2d
kcu105: 2015.2.1 updates
2015-08-25 09:12:36 -04:00
4eb28592c8
kcu105: 2015.2.1 updates
2015-08-25 09:12:32 -04:00
77e2eb7364
projects/common: Fix parameter name for xilinx core axi_gpio
...
Parameter C_GPDATA_WIDTH is changed to C_GPIO_WIDTH.
2015-08-25 10:07:11 +03:00
d3e090da3d
projects/common: Upgrade Xilinx's IP cores
...
To update the projects to Vivado 2015.2 the following IP cores were upgraded:
+ microblaze 9.4 to microblaze 9.5
+ axi_ethernet 6.2 to 7.0
+ mig 6.1 to 7.0
2015-08-25 10:03:49 +03:00
203d7cb470
projects/common: Cosmetic changes.
2015-08-25 09:58:32 +03:00
f08305c979
adv7511_ac701: Fix axi_ethernet core's port connections
2015-08-25 09:54:19 +03:00
af8a48d90e
projects: Fix broken parameters at the common block designs.
...
Fix parameter names for axi_spdif_tx and axi_i2s_adi core instantiations.
2015-08-25 09:25:24 +03:00
e760aa424a
daq2/a10gx-- intmem to ddr
2015-08-19 13:26:38 -04:00
8cc3aa0865
ddr- 933/233
2015-08-19 13:26:38 -04:00
57cfb7cfb1
hdl/library: Update the IP parameters
...
The following IP parameters were renamed:
PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
0422c87846
a5soc/base- remove hdmi, led/switchs to gpio
2015-07-27 12:08:33 -04:00
f5f9ec38e8
a5soc- base/fmc split
2015-07-27 12:08:32 -04:00
58e0884ff9
a5soc- board qsys file
2015-07-27 12:08:32 -04:00
4d7ff0ed15
a5gte: Update ethernet connections
2015-07-27 16:05:26 +03:00
31ab81d627
a5gt: Updated ethernet clock constraints
2015-07-27 16:02:51 +03:00
a1733238df
fmcjesdadc1- base/board split up
2015-07-23 15:21:53 -04:00
3e2712cf18
a5gt-base: initial updates
2015-07-22 15:22:22 -04:00
64070b6f27
a5gt- base system
2015-07-22 15:04:59 -04:00
08e46c5ff2
a10gx-base: data-master connections
2015-07-21 10:53:54 -04:00
a87b8fbf94
a10gx- base system only
2015-07-20 09:29:30 -04:00
1f7745610e
daq2- ddr updates
2015-07-14 12:46:52 -04:00
6862655b0d
Add .gitattributes file
...
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
15740a7d34
fmcjesdadc1- 15.0 updates
2015-06-24 05:31:09 -04:00
e3e4af5c51
daq2/zc706: open ports
2015-06-10 14:25:58 -04:00
dc7064ab95
fmcomms2/vc707 - wfifo changes
2015-06-05 12:44:04 -04:00
a8a71b4971
alt-tq: common file
2015-06-04 11:00:25 -04:00
f81d22a17a
altera- common timing check
2015-06-04 10:56:32 -04:00
d111692608
daq2/a10gx- ddr-ref @133
2015-06-04 10:53:16 -04:00
264dbfed35
common: rfsom: Add constraints for the eth1 rx clock
...
Add clock rate constraints for the eth1 rx clock, otherwise the tools
assume the RX paths are unconstrained and creates a bitstream which
violates hold times which causes bit errors on the RX path.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-03 17:21:43 +02:00
71b5004b25
projects- drp moved to up-clock domain
2015-06-01 14:57:59 -04:00
f9ffaf457d
projects/daq2- drp moved to up clock
2015-06-01 13:39:26 -04:00
aa24c442f5
a10gx- no-ddr
2015-06-01 11:00:01 -04:00
29ca9e4b8c
vc707: common, fixed address range for flash
2015-05-23 00:14:08 +03:00
8bd5fa5802
kc705: Common, fixed address range for the flash. Changed the start address so that it won't interfere with other cores
2015-05-23 00:10:06 +03:00
a6cae6b477
iobuf: do is a system verilog keyword
2015-05-21 14:06:17 -04:00
b311b9dac6
a10gx- updates
2015-05-14 14:35:42 -04:00
515dfd88d4
a10gx- added
2015-05-11 11:56:22 -04:00
3d4e9eb36a
ac701: common, commit ethernet reset pin
2015-05-11 16:41:28 +03:00
bad821ba1c
sys_dmafifo: Update the p_sys_dacfifo process
...
Update the ports and parameters at util_dacfifo instantiation.
2015-05-11 12:20:47 +03:00
81a20b4abb
rfsom- apisys lb updates
2015-05-08 15:22:17 -04:00
68570c1815
vc707: Common system mig, updated datawidth to 256 from 128
2015-05-08 10:51:27 +03:00
2a8703763e
zc706pr - 706 partial reconfiguration
2015-05-04 12:33:28 -04:00
aced144916
itx045: updates
2015-05-01 16:18:23 -04:00
ff443655ca
itx045: add ps7 settings
2015-05-01 16:17:59 -04:00
19ef85cec3
vc707: Changed mig project to use BANK_ROW_COLUMN, as it seems this mode gives best performance
2015-04-28 17:15:58 +03:00
272148eee5
rfsom: sdio 50mhz
2015-04-23 15:30:50 -04:00
7611c2ae17
kcu105: ddr mig rbc to rcb
2015-04-23 15:30:48 -04:00
f232a36141
common: Place HDMI interface registers into the IOB
...
The paths from the HDMI interface registers to the IO pads are
unconstrained. This means the P&R can in theory put the register anywhere
which could lead to stability issues on the interface, depending on what
else is in the fabric. To get predictable delays for the register to IO pad
path place the register into the IOB section.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-23 14:33:47 +02:00
e25cfb9d9f
rfsom: ddr configuration
2015-04-22 13:45:11 -04:00
a100ecd308
util_dacfifo: Update BRAM DAC Fifo
...
The fifo will be placed between the DMAC and the Upack module, all the interfaces were updated.
2015-04-21 15:45:56 +03:00
afea42f444
rfsom: Use interface connection for the I2S stream
...
Use a interface connection for the I2S stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:26 +02:00
90e132d203
mitx045: Use interface connection for the I2S stream
...
Use a interface connection for the I2S stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
7f26bfe436
zed: Use interface connection for the I2S stream
...
Use a interface connection for the I2S stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
06e37b0082
common: zed: Use interface to connect I2C core to the I2C mixer
...
Use a interface connection for the I2C connection instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
7da59a435f
common: rfsom: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
1f2ecaf037
common: mitx045: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
1d66cf63b6
common: zc706: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
ab5c7bb57b
common: zc702: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
70deb1eed1
common: zed: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
38722e569b
common: zed: Fix audio DMA reset signals
...
Make sure to connect the I2S and SPDIF core DMA reset signals to the correct net.
Fixes audio support on the ZED board.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
6d0a2bf64c
axi_adcfifo: added
2015-04-07 16:21:39 -04:00
4f7f109056
util_adcfifo: added
2015-04-07 16:08:38 -04:00
0b00073ce5
rfsom: add ddr parameters
2015-04-03 13:42:27 -04:00
8ed301a264
AC701: Common, removed system clock constraint
2015-04-02 11:51:20 +03:00
408dc6f018
ac701_base: Change data and instruction memory range to 8kbyte
2015-04-02 11:34:20 +03:00
bf1a50ef0c
mitx: common, fixed number of gpios enabled
2015-03-31 16:16:40 +03:00
4f69ae19c5
adv7511_mitx045: Update latest frame work.
2015-03-30 17:54:37 +03:00
c00633d1ac
adv7511_ac701: Update project and common files to the new framework.
2015-03-30 15:23:26 +03:00
67c8d02110
kc705/vc707: consistency fixes
2015-03-26 14:00:58 -04:00
1fcccacdf5
kc705/vc707: consistency fixes
2015-03-26 14:00:50 -04:00
daac204676
kc705: gpio bd
2015-03-26 10:14:12 -04:00
a74c61d6d5
vc707: gpio_bd changes
2015-03-23 10:00:46 -04:00
69326a72ef
VC707: Updated base design
2015-03-20 18:20:44 +02:00
d72c525b46
rfsom: sd1 to sd0 changes
2015-03-19 09:34:14 -04:00
fb5966f9fd
rfsom: sd1 to sd0 changes
2015-03-19 09:34:13 -04:00
6cc8f142f1
rfsom: sd1 to sd0 changes
2015-03-19 09:34:12 -04:00
72b41c981f
kc705_base: Fix base address overlap
2015-03-18 10:33:17 +02:00
cea2d90eb2
base_kc705: Fix different issues
...
+ No more constant block inside IPI.
+ Gpio switch/led is on the axi_gpio first channel.
+ Fix the address map
+ Remove hdmi/spdif related constraints from base constraints
2015-03-16 19:10:57 +02:00
65654b77ff
fmcomms2_kc705: Update design to the new hdl framework
2015-03-13 18:54:28 +02:00
7befef6662
fmcomms2_zed: Update design to the new hdl framework
2015-03-13 18:52:57 +02:00
ea303c6f61
zc702: Updated base design to the latest model
2015-03-13 12:44:08 +02:00
8ad8ec4d1e
ml605 removed
2015-03-12 13:00:28 -04:00
68361bafd4
zc706_base: The FCLK_CLK2 is not used.
2015-03-11 18:10:32 +02:00
ae16aeb064
kcu105/adv7511: moved hdmi/spdif out of base design
2015-03-10 16:15:15 -04:00
d7993401e6
kcu105/adv7511: moved hdmi/spdif out of base design
2015-03-10 16:15:14 -04:00
8967903d76
zc706: intr sensitivity level-high
2015-03-10 16:05:05 -04:00
a68463d033
rfsom: board updates
2015-03-10 15:26:31 -04:00
e38356b243
rfsom: board updates
2015-03-10 15:26:24 -04:00
f0395b646c
plddr3: ad_connect updates
2015-03-09 16:07:37 -04:00
031dffa80c
zc706: move gpio/spi to base design
2015-03-09 16:07:02 -04:00
2302f282d3
sys_dmafifo: ad_connect updates
2015-03-09 16:06:06 -04:00
545c0baada
kcu105: gpio led/sw merged to bd default
2015-03-09 16:05:28 -04:00
b31d9abd91
kcu105: gpio/spi moved to base design
2015-03-09 16:04:09 -04:00
1db5f4696f
kcu105: isolate ddr-300M from interconnect-100M timing
2015-03-06 12:37:31 -05:00
91765fdd82
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
7bf4141a3f
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
bf1388b05e
kcu105: rev.d changes
2015-03-04 12:43:04 -05:00
383cf3b3a3
rfsom: schematic changes
2015-02-18 14:32:20 -05:00
d2e9b1fe03
rfsom: schematic changes
2015-02-18 14:32:04 -05:00
996e1b7970
rfsom: constraint updates
2015-02-03 14:20:34 -05:00
d69d105b5d
vc707_common: Fix address mapping
...
The axi_ethernet/eth_buf/S_AXI_2TEMAC address space and axi_ethernet/eth_mac/s_axi/Reg address
segment does not exist in 2014.4.
2015-01-29 12:22:06 +02:00
e8ff30119d
vc707_xdc: Delete unnecessary clock definition
2015-01-29 11:39:10 +02:00
6c8ea24f20
common: Update VC707 base design to 2014.4
2015-01-28 16:24:52 +02:00
5a77ab0161
a5gt:common: Added phy reset signal from ethernet in pin assignments
2015-01-23 12:31:41 +02:00
050f17e034
a5gt3: common: corrected naming in pin assignments. added reset signal from FPGA2
2015-01-23 12:30:16 +02:00
72e89852b6
daq2/kc705: 2014.4 updates
2015-01-14 12:58:08 -05:00
b595cce697
kcu105-daq2-2014.4-- intermediate fixes
2015-01-13 13:40:18 -05:00
b0b4bfe531
kcu105-daq2-2014.4-- intermediate fixes
2015-01-13 13:40:17 -05:00
47871287f3
kc705: Updated base project with linear flash. Updated all depending projects
2015-01-13 10:19:07 +02:00
65d9f08763
zc706: mig 2014.4
2015-01-09 14:12:52 -05:00
868df1aac8
zc706: mig 2014.4
2015-01-09 14:12:51 -05:00
f566268db5
zed_common: Updated common to 2014.4
2015-01-08 11:59:26 +02:00
eb569b991d
dmafifo- remove util fifo setup
2015-01-06 16:23:14 -05:00
9e707d8a33
rfifo: wrapper updates
2015-01-06 16:17:33 -05:00
a944deebd5
wfifo: wrapper updates
2015-01-06 16:17:25 -05:00
61ba4f4357
rfsom: updated to rfsom
2014-12-23 14:03:58 -05:00
614dfcd93c
rfsom: updated to rfsom
2014-12-23 14:03:57 -05:00
ee52602c89
rfsom: initial commit
2014-12-23 14:03:55 -05:00
0de1a38245
zc706: 2014.4 update
2014-12-23 14:03:52 -05:00
71baa129a7
VC707: Fixed linear flash timings
2014-12-19 15:45:14 +02:00
59e610be09
zc706_constr: Move the sys_rst related constraint definition to zc706_system_mig_constr.xdc
2014-12-17 19:07:43 +02:00
77fa96fa67
plddr3: sys-rst from board pushbutton
2014-12-15 12:58:54 -05:00
ed7f8b4908
plddr3: sys-rst from board pushbutton
2014-12-15 12:58:44 -05:00
caa0268434
base_design: External IIC reset is connected to Vcc
...
External IIC reset is connected to Vcc in case of AC701, KC705 and VC707
2014-12-11 11:13:07 +02:00
e7c920bbd9
fmcomms2/ml605: compilation fixes
2014-12-09 14:32:39 -05:00
Rejeesh Kutty
Adrian Costina
AndreiGrozav
Istvan Csomortani
dbogdan
Lars-Peter Clausen
Shrutika Redkar